• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.265-267
• /
• 2002

In this paper, the communication between Over-Current Relay agents is realized using DNP(Distributed Network Protocol), which is the standard communication protocol of distribution automation system in KEPKO. The key words in OCR agent communication are defined and represented by use of DNP application function code. And the DNP index for OCR agent is defined. The proposed communication scheme is tested by use of Communication Test Harness, a test tool for DNP protocol to show its soundness.

• Journal of Environmental Health Sciences
• /
• v.36 no.3
• /
• pp.222-228
• /
• 2010

Biological degradation of nitrogen-containing aromatic compounds was investigated in activated sludge previously adapted to mineralize low concentrations of nitrogen-containing aromatic compounds. Normally, the time required for 95% degradation of 10 mg/l dinitrophenol (DNP) under aerobic conditions was less than 4 hours without any lag, and with mixed liquor suspended solid (MLSS) levels from 600 to 1,000 mg/l. However, when the initial DNP concentration was increased to 75 mg/l, lags and even complete inhibition of DNP degradation were observed. The length of the lag was found to increase proportionally with decreasing MLSS levels. When dilute activated sludge was incubated for extended periods (192 hours), degradation of 75 mg/l DNP did eventually occur after lag periods of 37 to 144 hours, depending on the MLSS concentration. DNP was degradable in high concentrations if MLSS concentrations were sufficiently high to allow growth of bacteria resistant to the toxic effects of DNP.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.849-852
• /
• 2008

Distributed Network Protocol은 Master와 Slave 개념을 적용한 이벤트 감시와 하나의 Master가 다중 Slave의 제어가 필요한 환경에서 유용하게 사용되고 있는 통신 Protocol이다. DNP는 현재 개방형 Protocol로 에너지와 관련된 산업계 분야에서 사실상의 표준으로 적용되어 사용되고 있다. 현재 상용화되고 있는 ASE2000과 DNP3의 분석을 토대로 Master와 Slave Station을 Simulation 하고 DNP3 Message를 Generate하여 Serial Port를 사용해 종단 간에 통신하는 DNP3 Call Simulator를 설계 및 구현하였다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.3
• /
• pp.703-713
• /
• 2015

The linking system between the control system and the field devices in the existing EMS/SCADA, in order to increase the reliability of the data, and access control through the separation of external network. Currently, There is a tendency that the need for connection to an external network that takes into account the economic aspect, systematic management and efficiency of operations is increasing. Such is evolved linkage section, is to have more security vulnerabilities than in the past, Eventually communication EMS/SCADA linkage section requires special management method. In this paper, taking into account the domestic environment, were presented the security Certification and Accreditation technology that was applied to serial DNP3 and TCP/IP based DNP3 that are mainly used in EMS/SCADA linkage section. Presented to security of Certification and Accreditation technology, divided into Resource Robustness Test and Malicious Packet Test for evaluate the safety. Each of the security requirements and evaluation method in proposed technology, is an attempt to present the differentiation of the existing Certification and Accreditation technology.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.59-64
• /
• 1970

Human Bence Jones Protein could be purified by DEAF-Sephadex A-50 column $(2{\times}37cm)$ with 0.02M phosphate Buffer (pH 8.0) and gradient increasing with NaCl concentration as in Fig. 2-4. Sample As (K-type Bence Jones Protein) had two component, F-I was major component and its dried weight was 350mg. of starting material of 500mg. Other Sample Im and Ik (${\lambda}$-type Bence Jones Protein) was purified by DEAE-Sephadex A-50 with 0.02M phosphate Buffer(pH 8.0)too. F-I (major component) of Im and F-I of Ik were 242mg and 146mg. its dried weight respectively. K-type of Bence Jones Protein's(As, Ko, Ta.) N-terminal amino acid residue was determined by method of DNP,. K-type of Bence Jones Protein's amino acid residue were either glutamic acid or aspartic acid. Sample Ta was confirmed as glutamic acid its N-Terminal. As and Ko were aspartic acid. Each yellowish spot (DNP-amino acids) were extracted with 4ml. of pH 8.05% $NaHCO_3$ solution and calculated its recovery by O.D. $(360m{\mu}$ using the ${\varepsilon}=18.1{\times}10^3DNP$ $Asp\;{\varepsilon}=17.41{\times}10^(3)\;DNP\;Glu$ considering 50% lose during; the acid (6N-HCI) hydrolysis. Recovery of ko and As were 54.3% and 65% of its starting materials (DNP-Protein). Sample Ta's recovery was 85% of its DNP-protein. ${\lambda}$-type of Bence Jones Protein was rot investigated its N-terminal amino acid residue by DNP-method, probably it was blocked its N-terminal residue with glutamic acid.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.353-358
• /
• 2014

In the past, security on control system was guaranteed by isolation of control system networks from external networks. However as devices of the control systems became more various and interaction between the devices became necessary, effective management system for such network emerged and this triggered connection between control system networks and external system networks. This made management of control system easier but also made control system exposed to various cyber attack threats, Therefore researches on appending security measures on each protocols are in progress. This paper focused on DNP(distributed network protocol)3 protocol which is used for communication between control center and substations. It describes characteristics of DNP3 protocol and research on adding security elements to the protocol. It also analyzed known vulnerabilities of DNP3 protocol and proposed data mining methodology for detecting such vulnerabilities.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.995-998
• /
• 2007

Pentacene moiety has been widely studied in Organic Thin-Film Transistor (OTFT) device as a channel layer because of high carrier mobility. In this study, we have fabricated vertical type Organic Static Induction Transistors (SITs) using pentacene, 6,13-Dinaphthalen-1-ly-Pentacene (1-DNP, 3), and 6,13-Dinaphthalen-2- ly-Pentacene (2-DNP, 4). 1-DNP and 2-DNP have same naphtyl group with pentacene, but different linked position and spatial arrangement. We have checked the static characteristics of materials in vertical type SITs device. We found that pentacene has as on/off ratio of 14.56, 1-DNP and 2-DNP shows as on/off ratio of 36.58 and 6.61 at VDS = 2V in SIT, respectively.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.640-642
• /
• 1999

Recent work within the DNP work group has resulted in the proposal, DNP 3.0, as the informative interface for distribution automation systems. This proposed standard embodies the generic principles developed and used within generic protocol. This paper describes a compliance test procedure specifically for Distribution Automation System, practical experience.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.6
• /
• pp.1143-1156
• /
• 2013

Power control system like SCADA(Supervisory Control And Data Acquisition) is gathering information using RS232C and low-speed analog communication network. In general, these methods are known as secure because of the secure characteristics from the analog based communication network and serial communication. In this study, first we build DNP communication environment using commercial power control simulator and find some vulnerabilities by testing from the viewpoint of confidentiality, integrity and availability. Consequently, we see the necessity of a valid method for authentication and data encryption when gathering information, even though that is known as secure so far. Discussion of needs of DNP authentication and data encryption is started about several years ago, but there is still nowhere applied that on real environment because the current methods can not fully meet the security requirements of the real environment. This paper suggests a solution to the vulnerabilities, and propose some considerations for enhancing power control system's security level by applying DNP authentication and data encryption.

• Review of KIISC
• /
• v.24 no.3
• /
• pp.44-53
• /
• 2014

최근 전력 제어시스템의 자동화 효율(Automation Efficiency)과 상호운용성(Interoperability)을 높이기 위해 공개된 표준 프로토콜과 상용 시스템을 사용하게 되었고 외부망과의 연결 필요성이 증가됨에 따라 SCADA 시스템에 대한 공격 위협성이 증가하고 있다. 그러나 전력 제어시스템의 중앙제어장치(Master)와 현장 운영장치(Outstation) 간 데이터를 교환하기 위한 통신 규격인 DNP(Distributed Network Protocol) 프로토콜은 보안을 고려하지 않고 개발되어 통신규격 자체에 보안 취약점을 가지고 있었고, 제어시스템에 대한 사이버 위협 요소도 크게 증가하고 있다. 정보통신 기술의 발전과 개방형 망이 갖는 장점을 취하기 위하여 DNP3 프로토콜은 TCP/IP 네트워크를 지원하게 되었고, TCP/IP 네트워크가 가지고 있는 기존의 보안 취약점(Vulnerability)이 전력 제어시스템 및 통신망에 그대로 이전되고 있어 중앙제어장치와 현장운영장치 간에 DNP3 표준에서 제시한 사항 외에 추가적인 보안 메커니즘이 요구된다. 본 논문에서는 SCADA 시스템이 보안성을 갖고 안전하게 운용되기 위한 IEEE DNP3 표준과 ISO/IEC TC57 WG15에서 권고하고 있는 IEC 62351 표준의 인증 및 암호화 메커니즘을 소개한다.