• 한국산업보건학회지
• /
• 제24권2호
• /
• pp.238-245
• /
• 2014

Objectives: It was known that workers in synthetic leather company are mainly co-exposed to dimethylformamide(DMF) with methyl ethyl ketone(MEK) or toluene(TOL) instead of a single dimethylformamide. This study was examined to the physico-chemical properties in single DMF and binary mixture DMF with MEK or TOL. Materials: Physico-chemical properties were measured by Korean and American Standard Test Methods. Results: Boiling point, specific gravity and flash point in single DMF were significantly higher than binary mixture DMF with MEK or TOL and such difference was dependent on the mixing ratio of MEK and TOL, and low explosion limit in binary mixture DMF with TOL was only significantly lower than single DMF. However, Reid vapor pressure had significantly higher in binary mixture DMF with MEK or TOL compared with single DMF. Conclusions: Our results demonstrate that the binary mixture DMF with MEK or TOL synergistically increases volatilization of DMF. It was concluded that the interaction between DMF and MEK and/or TOL might play a key role in the volatilization process of DMF under environmental conditions of workplace.

• 대한치과의사협회지
• /
• 제22권12호통권187호
• /
• pp.1059-1066
• /
• 1984

As an appraisal of Water Fluoridation Program in Chungju, fluoride content in the water of that city was examined, and 1176 K primary school children aged from 6 to 13 were surveyed on their oral hygiene status. The results were as followings: 1. Fluoride content ............ 0.8 ppm 2. dmf rate ............ 59.27% DMF rate ............ 39.46% 3. dmf t rate/index ............ 27.75%/2.40 dmf s rate/index ............ 11.91%/5.14 4. DMF T rate/index ............ 6.12%/0.93 DMF S rate/index ............ 1.65%/1.26

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.59-64
• /
• 2004

As a simulation of solvent-assisted dyeing, the solvent effects on the structure of polyethylene terephthalate(PET) film treated by dimethylformamide(DMF) were investigated. The effects were evaluated by the atomic force microscopy(AFM) topographical changes and FT-IR spectrum analysis. PET films treated with DMF at $70^{\circ}C$ for several different treatment time(20, 40, and 60 min). AFM topography showed that, with increasing treatment time by DMF, PET surfaces became smooth due to the swelling phenomenon and the rigid structure changed into flexible state which was contributed to increase the surface area of PET films. FT-IR spectrum analysis showed that DMF and molecular chains of PET interacted each other via their polar carbonyl groups and that DMF also affected the out-of-plane bending vibration mode of phenyl ring of PET.

• 한국염색가공학회지
• /
• 제14권5호
• /
• pp.277-283
• /
• 2002

Poly(ethylene terephthalate)(PET) filaments of regular(monodenier 2.08d) and ultramicrofiber (monodenier 0.05d) were treated with dimethylformamide(DMF) to observe the structure change of the PET such as shrinkage, density, X-ray diffraction of the UMF treated with DMF were measured. Also, dyeing experiments were performed to see the effects of DMF. The dyeability was improved by DMF treatments, and the equilibrium dye uptake increased in spite of the increase in the density and birefringence and crystallinity. The heat shrinkage appeared in PET UMF treated PET UMF treated with DMF at $80^\circ{C}$ by TMA, DSC, and Reovibron analysis and $T_m$ peak was shown by DSC analysis.

• 대한소아치과학회지
• /
• 제8권1호
• /
• pp.89-102
• /
• 1981

1147 preschool children aged from 3 to 6 living in some farm villages in Kyungki-do were surveyed on dmf and distribution of dental caries in primary dentition. The results were as follows: 1. dmf rate ... 92.76 % boy ... 94.52 % girl ... 90.5.5 % 2. dmf t rate ... 37.07 % dmf t index ... 7.09 3. dmf s rate ... 13.74 % dmf s index ... 13.14 % 4. df t index ... 6.94 5. Each percentage of d, m & f per dmf teeth d rate ... 89.96 % m rate ... 7.24 % f rate ... 2.67 % 6. Most frequent site of dental caries in each tooth $\underline{A}$ mesial $\overline{A}$ distal $\underline{B}$ mesial $\overline{B}$ distal $\underline{C}$ distal $\overline{C}$ distal $\underline{D}$ disto-occlusal $\overline{D}$ disto-occlusal $\underline{E}$ linguo-occlusal $\overline{E}$ occlusal 7. Order of caries susceptibility $\overline{E}$ $\underline{E}$ $\overline{D}$ $\underline{D}$ $\underline{A}$ $\underline{B}$ $\overline{C}$ $\underline{C}$ $\overline{B}$ $\overline{A}$ 8. All the values in caries criteria showed a marked increae from those of 1968.

• 대한화학회지
• /
• 제36권3호
• /
• pp.345-350
• /
• 1992

Ln$(NO_3)_3$/DMF 상자성 용액의 양성자 선-나비와 화학적이동을 240 K부터 380 K 사이에서 측정하였다. 이들 데이터로부터 DMF 분자의 CHO기에 대한 배위구 교환속도와 열역학 교환파라미터를 추출하였다. 1/$T_2$ 와 ${\Dellta}{\omega}$ 데이터의 온도의존성을 자세하게 분석하고 고찰하여 결과를 정리하였다. 분석의 결과를 살펴보면 짝짓지 않은 전자 스핀이 몇몇 $Ln^{3+}$이온에서 첫 배위구를 넘어 퍼지면서 bulk 용매의 DMF 분자로 스칼라이완의 기여를 제공하는 것 같다.

• 대한치과의사협회지
• /
• 제21권12호통권175호
• /
• pp.979-984
• /
• 1983

As an appraisal of Water Fluoridation Program in Chungju, fluoride content in the water of that city was examined, and 1317 K primary school children aged from 6 to 13 were surveyed on their oral hygiene status. The results were as follows: 1. Fluoride content ....................... 0.8 ppm 2. dmfrate ..................................... 81.17% DMF rate .......................................... 38.88% 3. dmf t rate/index ................................ 29.17%/2.55 dmf s rate/index ............................... 14.33%/6.27 4. DMF T rate/index ............................. 6.32%/0.92 DMF S rate/index ............................ 1.86%/1.35

• 대한화학회지
• /
• 제25권6호
• /
• pp.376-382
• /
• 1981

페나실브로미드와 치환아닐린류와의 반응속도를 메탄올과 DMF중에서 전기전도도 법으로 측정한 결과 반응속도는 치환기의 전자를 주는 능력이 강할 수록 빨랐으며, 메탄올 속에서 보다 DMF 속에서 더 빨랐다. ${\delta}H^{\neq}$와 ${\delta}S^{\neq}$ 사이에서는 등속 관계가 성립하였으며, 이때 등속 온도는 메탄올에서는 $539^{\circ}K$, DMF에서는 $400^{\circ}K$ 였다. 그러나 p-니트로 아닐린은 용매효과 때문에 직선에서 벗어났다. $Br{\o}nsted$ plot의 경우 메탄올과 DMF에서 log k = 0.57p$K_a$-1.28 (r = 0.996) in MeOH at $45^{\circ}C$; log k = 0.65p$K_a$-0.88 (r = 0.970) in DMF at $45^{\circ}C$,로서 좋은 직선관계가 성립하였다. Hammett${\sigma}$ 도시 결과 이 반응은 아닐린의 친핵치환 반응이었으며, 다음의 식이 얻어졌다. log k/$k_0$ = -2.00${\sigma}$ + 0.06 (r = 0.985) in MeOH; log k/$k_0$ = -2.22${\sigma}$ + 0.08 (r = 0.995) in DMF. 그리고 DMF에서 $4-NO_2$기가 직선에서 벗어났다. 이는 치환기에 의한 용매효과에 기인하는 것이라고 생각된다. 이상의 결과로부터 본 반응의 치환기 효과는 전이상태에서 결합의 형성이 보다 우세한 $S_N2$ 메카니즘으로 진행되고 있으며, 결합의 형성은 DMF 용매에서 더욱 진행되고 있다.

• Advances in environmental research
• /
• 제7권1호
• /
• pp.39-52
• /
• 2018

Direct membrane filtration (DMF) of wastewater has many advantages over conventional biological wastewater treatment processes. DMF is not only compact, but potentially energy efficient due to the lack of biological aeration. It also produces more biosolids that can be used to produce methane gas through anaerobic digestion. Most of ammoniacal nitrogen in wastewater is preserved in effluent and is used as fertilizer when effluent is recycled for irrigation. In this study, a technical feasibility of DMF was explored. Organic and nitrogen removal efficiencies were compared between DMF and membrane bioreactor (MBR). Despite the extremely high F/V ratio, e.g., $14.4kg\;COD/m^3/d$, DMF provided very high COD removal efficiencies at ~93%. Soluble microbial products (SMP) and extracellular polymeric substances (EPS) were less in DMF sludge, but membrane fouling rate was far greater than in MBR. The diversity of microbial community in DMF appeared very narrow based on the morphological observation using optical microscope. On the contrary, highly diverse microbial community was observed in the MBR. Microorganisms tended to form jelly globs and attach on reactor wall in DMF. FT-IR study revealed that the biological globs were structurally supported by feather-like materials made of secondary amines. Confocal laser scanning microscopy (CLSM) study showed microorganisms mainly resided on the external surface of microbial globs rather than the internal spaces.

• 한국산업보건학회지
• /
• 제18권1호
• /
• pp.80-90
• /
• 2008

This study was carried out to investigate the correlation of urinary NMF concentration in workers exposed to DMF and concentration of DMF in the workplace. Samples were collected in workers exposed to high dose solvent in the synthetic leather factory by using silicagel tubes for 5-15 minutes, and were analyzed by GC. Geometric mean concentrations of DMF in the workplaces were 4.67 ppm in normal operation and 63.95 ppm in high exposure operation. The concentration of case uppers and machine cleaning process were more than 100 ppm in short time. The correlation of urinary NMF in workers and DMF in workplace was statistically significant in normal operation and high exposure operation. Correlation coefficient are 0.215(p<0.05) and 0.263(p<0.05). The result implied that STEL of DMF should be established in normal operation processes as well as high exposure operation processes.