• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1338-1340
• /
• 1987

This paper describes the design of ECG data preprocess module for the ECG signals. This module process the data obtained from two channels. It is composed of the AID converter, QRS detector, one chip micro-computer and memory. This module performs the following functions;digital filtering, R wave detection and determination of reference point for the ST segment. The measured points are transfered to the next data module by the interrupt process. This preprocessor data module is available to the basis for the parallel data processing for the real time automatic diagnosis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2288-2291
• /
• 2004

In this paper, UPS, which is embedded in computer, is developed against the poor utility power system. In the developed system, PIC16C74A is used as the main controller, and UPS system consists of micom control module, power failure detecting module, charging module, power module, synchronous transfer module, and GUI module. Additionally, GUI module consists of battery charging state unit, power operating unit and operating state unit.

• 센서학회지
• /
• 제27권4호
• /
• pp.254-258
• /
• 2018

A Wi-Fi signal network (WSN) system is introduced in this paper. This system consists of several data-transmitting sensor modules and a data-receiving server. Each sensor module and the server contain a unique intranet IP address. A piezoelectric accelerometer with a bandwidth of 12 kHz, a 24-bit analog-digital converter with a sampling rate of 15.625 kS/s, a 32-bit microprocessor unit, and a 1-Mbps Wi-Fi module are used in the data-transmitting sensor module. A 300-Mbps router and a PC are used in the server. The system is verified using an accelerometer calibrator. The voltage output from the sensor is converted into 24-bit digital data and transmitted via the Wi-Fi module. These data are received by a Wi-Fi router connected to a PC. The input frequencies of the accelerometer calibrator (320 Hz, 640 Hz, and 1280 Hz) are used in the data transfer verification. The received data are compared to the data retrieved directly from the analog-to-digital converter used in the sensor module. The comparison shows that the developed system represents the original data considerably well. Theoretically, the system can acquire vibration signals from 600 sensor modules at an accelerometer bandwidth of 15.625 kHz. However, delay exists owing to software processes, multiplexing between sensor modules, and the use of non-real time operating system. Hence, it is recommended that this system may be used to acquire vibration signals with up to 10 kHz, which is approximately 70% of the theoretical maximum speed of the system. The system can be upgraded using parts with higher performance

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.216-218
• /
• 2001

The transformer role is very important in power system operation and control; also its price is very expensive. Therefore many kinds of the efforts for transformer protection have been executed. So for as, current differential relay(87) has been mainly used for transformer protection. But current differential relaying method has several troubles as followings. Differential current can be occurred by transformers inrush current between winding1 and winding2 of transformer when transformer is initially energized. Also harmonic restrained element used in current differential relaying method is one of the causes of relays mal-operation because recently harmonics in power system gradually increase by power switching devices(SVC, FACTS, DSC, etc). Therefore many kinds of effort have been executed to solve the trouble of current differential relay and one of them is method using ratio of increment of flux linkages(RIFL) of the primary and secondary windings. This paper introduces a novel protective relay for power transformers using RIFL of the primary and secondary windings. Novel protective relay successfully discriminates between transformer internal faults and normal operation conditions including inrush and this paper includes real time test results using RTDS(Real Time Digital Simulator) for novel protective relay. A novel protective relay was designed using the TMS320C32 digital signal processor and consisted of DSP module. A/D converter module, DI/DO module, MMI interface module and LCD display module and developed by Xelpower co., Ltd.

• 대한의용생체공학회:의공학회지
• /
• 제27권5호
• /
• pp.282-290
• /
• 2006

We have developed a multi band digital hearing aid algorithm emphasizing feedback cancellation and a hardware module to evaluate the performance of our algorithm. The hearing aids should be able to compensate for individual hearing loss characteristics of hearing impaired person. Thus hearing aids need the function of multi-bands amplification and the capabilities of feedback cancellation that can remove howling caused by acoustic feedback. In this paper, we proposed a digital hearing aid algorithm which has multi-bands compensation using modified discrete cosine transform (MDCT) and can efficiently remove acoustic feedbacks. Moreover, we have developed digital hearing aid hardware module, which can evaluate hearing aid algorithms in real time operation. The developed algorithm and hardware module were verified through computer simulation and clinical tests. Through operational experiments, good performances in real time operation environment and an efficient howling cancellation were also observed. The developed hardware module can operate in stable condition and it is expected to become a good hardware platform for developing hearing aid algorithms.

• 디지털융복합연구
• /
• 제10권5호
• /
• pp.275-281
• /
• 2012

본 논문에서는 모바일 환경에서 LBS 성능을 보장하기 위한 모듈형 관리기를 제안한다. 제안된 시스템은 시나리오 관리 모듈, 이동성 관리 모듈, 그리고 통계 관리 모듈로 구성되어 있으며, 각각의 모듈은 시나리오 리스트에 따라 성능을 최적화하기 위하여 이동성을 제어한다. 그리고 통계 관리 모듈은 이동성 정보, 오류 해결, 그리고 여러 문제들을 기록하고 저장한다. 따라서 제안된 구현 시스템은 수작업을 통하여 시스템 성능을 체크하는 것에 비해서 관리 비용을 감소시키고, 관리 성능을 향상시키는 장점을 제공하게 된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2677-2680
• /
• 2003

This paper describes the implementation of a 4 channel embedded DVR system. It receives analog video from CCD cameras and converts to 640${\times}$480 CCIR-656 digital video by 30 frames/sec. These digital images are compressed to the wevelet transformed image using hardware codec which is capable of 350:1 real-time compression and decompression. The DVR is working on linux and it implemented on an embedded system which is based on StrongARM processor. For the interface between processor system module and image processing module, GPIO and memory control module are used, device drivers are developed. Linux kernel source is customized. This paper provides techniques of embedded system development and embedded linux porting.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.225-228
• /
• 2005

A context-aware services platform supporting mobile agents consists of sensor nodes and a sensor coordinator. Sensor nodes collect environmental information and transmit the collected information to the sensor coordinator through wireless sensor networks. The sensor coordinator passes the information to the context-aware service module, and the mobile agent. The context-aware service module or the mobile agent performs services suitable for a user's situation based on the environmental information and a service actuation message is delivered to an actuation node through the sensor coordinator. In this paper, we present a context-aware services platform structure employed in our project, and describe context-aware services platform interfaces with a context-aware service module and mobile agents.

• 한국디지털건축인테리어학회논문집
• /
• 제11권2호
• /
• pp.61-70
• /
• 2011

This study aims to establish the concept about a new approaching method dor remodeling in the planning step. also, this study sets up the way how to approach in a dimensional way by classifying the conceptual composition of the target housing as a method. The dimensional definition is as below. The one dimensional approach: the spot. the two dimensional approach: the line, the three dimensional approach: the apatial mass, the four dimensional approach: space + time, the n dimensional (multi-dimensional) approach: the space + time + emotion. The research findings are as follows : For the purpose of remodeling, the old housing should be viewed in the three dimensional shape and space. It is defined as multi-dimensional module method to design the shape and space of the target housing in a multi-dimensional point, considering the three dimensional space composition, the emotion of the user, the housing itself. and the time of the user.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.517-519
• /
• 2005

In this paper, we consider a digital protection IED(Intelligent Electric Device) for a distributed power system. The IED can measure various elements for protection and communicate with another devices through network. The protection IED is composed of specific function modules: signal process module which converts analog signal from PT and CT handle algorithm to digital one; communication module for connection with another IEDs; input/output module for user-interfaces. A general purpose DSP board with TMS320C2812 is used in the IED. In order to verify the proposed IED, experimental researches with the power system simulator DOBLE has been carried out for a phase earth fault. The results show an under-voltage relaying algorithm has been realized sucessfully in the hardware system.