• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.2
• /
• pp.249-254
• /
• 2019

A Digital Transmitter/Receiver Module(DTRM), which is an essential part in active phased-array radar systems, generates a high heat density, and needs to be properly cooled for stable operation. A tile-type DTRM that is a stacking structure of multi-layer components was modeled with simplification and heat dissipation characteristics of the DTRM model were studied using computational fluid dynamics(CFD) simulations. Most of the heat was dissipated by the heat conduction through the cold plate, but the heat transfer by the forced convection on top of the DTRM also was found to play an important role in the thermal management. Under the given conjugated heat transfer environment, the DTRM was confirmed to secure a stable operating temperature range.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1201-1206
• /
• 2003

A measurement device for gas flow rate using hot-wire module is developed for the utilization in low-accuracy industrial applications. The module has three wires of measuring and heating, and a bridge circuit is installed to detect electric current through the wire in the module. An amplification of the signal and conversion to digital output are conducted for the online measurement with a personal computer. In addition, temperature distribution in the module is numerically analyzed to examine the measured outcome from the module experiment. The flow rate of air and carbon dioxide gas is separately measured for the performance examination of the device. The experimental relation of measurement and flow agrees with the prediction from the numerical analysis. The outcome of the performance test indicates that the accuracy and reproducibility of the module is satisfactory for the purpose of industrial applications.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.79-80
• /
• 2013

MMC(Modular Multilevel Converter)는 여러 개의 Power Module을 직렬로 연결하여 정현파에 가까운 고전압의 파형을 얻을 수 있는 토폴로지로 대용량 전력변환 분야의 요구를 만족하면서 전력 품질을 향상시킬 수 있어 근래에 상당히 주목받고 있다. 당사에서는 5Mvar급 STATCOM(STATic synchronous COMpensator)을 MMC 형태로 제작하였다. 제작된 5Mvar급 STATCOM은 한 상당 12대의 Power Module로 구성하여 25-Level로 제작되었다. 제어시스템은 DSP(Digital Signal Processor)를 이용하였으며, 하나의 Main Controller와 다수의 Cell Controller, FPGA 보드 등으로 구성되어 있다. Controller 간의 상호 정보를 교환하기 위해 CAN 통신을 이용하였고, Power Module의 스위칭을 위한 보드는 각각에 연결되어 있으며, Cell Controller보드와는 절연을 위해 광신호로 연결하였다. 본 논문에서는 MMC 시스템의 제어기간 CAN 통신인터페이스와 Power Module의 PWM 동기화에 대해 설명을 하였다.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.617-624
• /
• 2013

Low power consuming and highly responsive semiconductor-type microelectromechanical systems (MEMS) gas sensors are fabricated for real-time environmental monitoring applications. This subsystem is developed using a gas sensor module, a Bluetooth module, and a personal digital assistant (PDA) phone. The gas sensor module consists of a $NO_2$ or CO gas sensor and signal processing chips. The MEMS gas sensor is composed of a microheater, a sensing electrode, and sensing material. Metal oxide nanopowder is drop-coated onto a substrate using a microheater and integrated into the gas sensor module. The change in resistance of the metal oxide nanopowder from exposure to oxidizing or deoxidizing gases is utilized as the principle mechanism of this gas sensor operation. The variation detected in the gas sensor module is transferred to the PDA phone by way of the Bluetooth module.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.259-262
• /
• 2003

In this paper, we designed and implemented digital wireless audio system with embedded RTOS using Bluetooth. Transmitter is consisted of a Settopbox, FIFO for interface block, Microprocessor(ARM7TDMI), UART driver and Bluetooth module. Receiver is consisted of a Microprocessor, AC-3 decoder, Bluetooth module and a Speaker with Amp. We programed Bluetooth protocal stack of HCI, L2CAP, and RFCOMM, so that Bluetooth module interacts with CPU.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.413-416
• /
• 1998

Sensitivity and calibration considerations are most important in the design and implementation of real control systems. Ideally parameter changes due to various causes should not appreciably affect the system's performances. But all the values of physical components of the plants and controllers as well as the relevant environmental conditions change in time, thus the output performance can be deteriorated during the operating span of the system. Naturally the duty of calibration or the prevention of performance deterioration due to excessive component sensitivity should be provided to the control system. In this paper, we propose a digital controller which has the capability of calibration and gain adjustment as well as the execution of control law. Specifically the problems of gain adjustment and offset calibration in the light source and CdS sensor module for position measurement in a flexible link system are considerably resolved. The parameters of measurement module are prone to change due to environmental brightness conditions resulting in poor steady state performance of the overall control system. Thus a proper method is necessary to provide correction to the changed values of gain and offset in the position measurement module. The proposed controller, whenever necessary, measures the open-loop characteristics, andthen calculates the offset and sensor gain correction values based on the prepared standard measurements. It is applied to the control of a flexible link system with the gain and offset calibration porblems in the light sensor module for position to show the applicability.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.77-85
• /
• 2009

In this paper, we propose data format for smell, taste, touch with speech and vision which can be transmitted and implement a floral scent detection and recognition system. We provide representation method of data of smell, taste, and touch. Also, proposed floral scent recognition system consists of three module such as floral scent acquisition module using Metal Oxide Semiconductor (MOS) sensor array, entropy-based floral scent detection module, and floral scent recognition module using correlation coefficients. The proposed system calculates correlation coefficients of the individual sensor between feature vector(16 sensors) from floral scent input point until the stable region and 12 types of reference models. Then, this system selects the floral scent with the maximum similarity to the calculated average of individual correlation coefficients. To evaluate the floral scent recognition system using correlation coefficients, we implemented an individual floral scent recognition system using K-NN with PCA and LDA that are generally used in conventional electronic noses. In the experimental results, the proposed system performs approximately 95.7% average recognition rate.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.67-76
• /
• 2007

Data used for the SFP module are stored in A0 and A2 memory area based on the SFP-MSA standard. In this paper the auto set-up program for SFP module has been designed and implemented. In order to make the Digital Diagnostic Monitoring Interface, the specific value has been written into the designated register via RS232 communication channel in the LD Driver IC. The Agilent VEE is used as a programming language for factory automation, and optical characteristics of SFP module and SFP-MSA standard are main structure of the implementation. The implemented program has been applied to the manufacturing field and the system gains a higher effect than the result of 6-Sigma.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1155-1162
• /
• 2023

The Korea Research Institute of Ships and Ocean Engineering (KRISO), which is developing the core technology for the buoyancy engine of underwater gliders, has developed a test module that can vertically ascend and descend with a buoyancy engine to verify the performance of the developed buoyancy engine. The independent test module was tested in a 15 metre deep pit in the Ocean Engineering Basin to verify its ability to ascend and descend. In order to test at a shallower depth than the real sea, it was necessary to know the negative buoyancy value during descent and the time at which the buoyancy engine would be activated. To do this, we solved the equation of motion in the vertical direction to obtain these values and applied them to the tank test. To validate the usefulness of solving the equation, we also compared the depth of descent over time measured in the test with the results calculated from the solution.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1281-1283
• /
• 1995

In this paper, we develop a prototype of the Optical SCM transmission module. This module is possible to application to electric facilities for control and measurements. Transmission channel number is two channels, namely, image and digital signal. In the image transmission, modulation method is AM, baseband signal is NTSC video signal and demodulation use PLL. Modulation of digital signal is QPSK, 1.544Mbps and demodulation use PLL. First, we calculate theoretical analysis about RF and Optical link in the transmission. This calculation is well correspond with practical system and transmission experiment is excellent, but this is only two channel model. And now, we plan to multichannel transmission to measure intermodulation, frequency assignments and optimal channel numbers et al.