• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.3
• /
• pp.174-183
• /
• 1997

Turbine rotor disc consists of disc, bore, keyway, hub, and rim in which the typical defects are located. And these part of disc has very complicated geometry, therefore proper transducer selection, wedge design, fabrication, classification and evaluation of the signal identification are required. In this research, test block with the artificial flaws at keyway and boresurface parts have been used in order to establish the ultrasonic inspection technique for flaw detectability on disc. The analysis of the signals from the test blocks was performed. The wedges were designed according to the curvature from the discs. All the ultrasonic signals were collected and identified for evaluation. The ultrasonic inspection technique for the flaw-detection was established from this research. And it is proved that the result of this research can be applicable in the field inspection.

• Journal of Yeungnam Medical Science
• /
• v.8 no.1
• /
• pp.238-245
• /
• 1991

The disc internal disruption syndrome is not well known to us, but the following hypothesis is widely accepted in clinical practice. The disc internal disruption syndrome may develop intractable back pain with aggrevated of pain, loss of spinal motion with any physical exercise, leg pain, loss of energy, marked weight loss, and profound depression. The patient with this syndrome will be found to have normal plain roentgenograms, myelograms, CT scans, results of blood examination and neurologic findings. For these reasons, this syndrome was frequently diagnosed by abnormal discographic findings. We had experience with two cases of disc internal disruption syndrome with clinical, roentgenographic and discographic evaluations. Thus We present these cases with a brief review of the concerned literature.

• Journal of Veterinary Clinics
• /
• v.20 no.4
• /
• pp.519-522
• /
• 2003

An appearance of herniated intervertebral disc into thoracolumbar vertebral canal was evaluated in two patients using computed tomography (CT). Before CT scanning, plain radiography and myelography were performed in both cases. CT images were compared to those of myelography. Dogs were positioned in sternal recumbency under inhalation anesthesia and transverse slices with 2 mm thickness were obtained around thoracolumbar region. The transverse CT images were examined using both vertebral and spiral window mode. The most common findings on CT images were loss of vertebral canal epidural fat, bulging of vertebral canal disc margins, displacement of spinal cord and flatted vertebral canal. Whereas, narrowed intervertebral disc space and simple extradural pattern were the main findings on plain and contrast radiographs. CT imges showed the extent of the herniated disc lesion, type II intervertebral disc hernation, and the displacement of spinal cord in detail in both occations. It is considered that degree and precise localization of the intervertebral disc herniation and subtle lesion of spinal cord could be identified accurately using computed tomography.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.231-238
• /
• 2006

Nondestructive examination for low pressure turbine disc in standard nuclear power plant using phased array technique was studied. For this purpose, disc mockups were made and notches were machined in the mockups. Detection and length sizing by different methods are compared. Depth of deep notches could be measured by using AATT(absolute arrival time technique) or RATT(relative arrival time technique) but shallow notches that must be detected in early stage couldn't be measured by these two methods. For this case, notch depth was estimated by using signal response angle range and preyed usefulness.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.6
• /
• pp.1101-1108
• /
• 2010

This study was conducted to investigate whether whole body cryotherapy and spinal decompression have effectiveness on the pain, lumbar flexion range of motion, and global perceived effect scale in patients with lumbar disc herniation. Thirty subjects were participated in this study. And they were all randomly divided into whole body cryotherapy and spinal decompression group. To evaluate the effects of whole body cryotherapy and spinal decompression, subjects were evaluated by using visual analogue scale, lumbar flexion range of motion, and global perceived effect scale. The assessment parameters were evaluated before, after 2 weeks treatments. And we received a consent form whole body cryotherapy subjects. The results of paired t-test, independent t-test, and ANCOVA analysis of variance showed that pain, lumbar flexion range of motion, global perceived effect scale were significantly improved after than before therapy in whole body cryotherapy group. So we conclude that whole body cryotherapy has effectiveness on the pain, lumbar flexion range of motion, and global perceived effect scale in patients with lumbar disc herniation.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.2
• /
• pp.199-208
• /
• 2010

Objectives : To study the cervical lordosis and roentgenographic analysis of cervical disc space in neck pain with or without temporomandibular disorder(TMD). Methods : Radiographic measures of cervical lordosis, cervical disc space narrowing were collected, statiscally analyzed. Results : TMD group showed a significant increase in cervical lordotic angle as compared with non-TMD group, whereas no significant change in cervical disc degeneration. Conclusions : The findings from this study suggest that the curvature of the cervical spine is related to the subject's TMD.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.3
• /
• pp.163-171
• /
• 1998

Near/far field length and directivity of transducers were investigated for the improvement and evaluation of the detectability of flaws in a disc. The reference block is fabricated for the disc of stage 6 in Yonggwang unit 1. The near/far field and directivity of an ultrasonic transducer with the center frequency of 5MHz were calculated for the inspection of the disc. These values showed good agreements with the experimental results. In the system composed of a wedge and a disc, those are evaluated theoretically and experimentally for the specimen with the artificial flaws of the size 2mm and 4mm and an ultrasonic transducer with the center frequency 5MHz and diameter 0.5inch. The detectability of keyway-flaw and detectable region for inspection were evaluated by using both tangential $45^{\circ}$ and $90^{\circ}$ transducers located at the distance of 53mm and 75mm from the disc hub, respectively.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.628-634
• /
• 2018

In an examination of the temporomandibular joint disc, MRI(Magnetic Resonance Imaging) is a useful method, and it is necessary to conduct an examination with one's mouth open for a long time to observe the accurate position change of the disc. Thus, this study would produce a TMJ device, using the 3-D printing technology, which would maintain the state of opening the mouth and would evaluate its usefulness as compared to the existing fixed device. As compared to the image using the existing TMJ device, the image taken with the self-produced TMJ device with a 3-D printer showed a somewhat lower SNR, but there was no defect for a clinical use. It is judged that benefits to costs would increase, since it can be customized for the individual patient and can contribute to the production of similar tools by utilizing the 3-D printing technology.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.113-120
• /
• 1991

근년, 정밀가공기술의 진보에 따라 AI 합금이나 동등의 연질금속을 이용한 고출력 Laser용 Mirror, 전자계산용 자기Disc기반, Laser Printer용 PloygonMirror등의 Opto-electronics 부품이 경면(Mirror Surface)절삭가공에 의해서, 또 LSI용 Silicon Wafer의 가공은 연마가공에 의해서 nmRmax의 표면조도로 마무리 가공되고 있다. 본 연구에서는 고출력 Laser용 Mirror, 자기Disc기반, Silicon Wafer와 같은 경면(표면 조도 submicron이하)에 존재하는 미소표면결함을 정량적이며, 고속측정이 가능한 방법인 새로운 측정법을 제안하고, 이 시스템을 생산라인에서 가공과 동시에 검사하는 In-process측정이 가능한 특정 시스템의 개발을 최종목표로 하고 있다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.185-196
• /
• 1998