• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.92-99
• /
• 1997

This paper proposed a control method to improve the efficiency of monitoring method by applying the nural network for an alarm processing method(APM)in an elevator facility of apartment complex. This APM is based on the cumulative generalized delta rule of backpropagation in neural network.It was used to infer the minimum alarms among multi-fired alarms, and then the inferred alarm can be dis¬played maintenance information of facility by using a pre-defined troubleshoot knowledge base. For validating the proposed monitoring method of this thesis, simulation results are compared with the operation of existing monitoring system and the way of alarm processing. The simulation method used to the three case of virtual scenario. As comparison results, a proposed method in this paper could be proved the applied possibility of an neural network and the performance in fields of facilities maintenance.

• Resources Recycling
• /
• v.10 no.1
• /
• pp.49-55
• /
• 2001

The strategy of recovering metals from scrap is in general much different from primary sources. One of the main differences between the treatment of scrap and that of primary sources lies with the fact that metals are frequently associated with other met-als to form alloys in scrap, while metals occur in primary sources as oxides or sulfides. In this paper, factors affecting the dis-solution behavior of metals from various alloy systems have been reviewed and discussed. Specific examples have been drawn from Au/Ag, Au/cu and Ag/cu systems. Results of the dissolution behavior of various metals from these alloys have been reviewed and compared to the dissolution behavior of single metal systems in various lixiviants such as acids, cyanide and ammonia. It has been observed that the presence of other metals in alloys would significantly affect the dissolution rate of the metal in question. The leaching behavior of metals from homogeneous alloys relies on the chemical interaction between atoms in the lattice of the alloys, while that from heterogeneous alloys is affected by galvanic interaction established in the solution The manner in which the dissolution of a certain metal is influenced by surrounding metals has been discussed in terms of pas-sive and noble nature of the metal in relation to the neighboring metals. The role of the standard electrochemical Potential of these metals on the selective dissolution for a given lixiviant has also been discussed.

• IE interfaces
• /
• v.14 no.3
• /
• pp.247-254
• /
• 2001

As current postal automation is limited to dispatch and arrival sorting, delivery sequence sorting is performed manually by each postman. It not only acts as a bottleneck process in the overall mailing process but is expensive operation. To cope with this problem effectively, delivery sequence sorting automation is required. The important components of delivery sequence sorting automation system are sequence sorter and Hangul OCR which function is to extract the address of delivery point. DSI database will be interfaced to both Hangul OCR and sequence sorter for finding the accurate delivery sequence number and stacker number. The objectives of this research are to develop DSI(Delivery Sequence Information) database prototype and client application for managing information effectively. For database requirements collection and analysis, we draw all possible sorting plans, and apply the AHP(Analytic Hierarchy Process) method to determine the optimal one. And then, we design DSI database schema based on the optimal one and implement it using Oracle RDBMS. In addition, as address information in DIS database consist of hierarchical structure which has its correspondence sequence number, so it is important to reorganize sequence information accurately when address information is inserted, deleted or updated. To increase delivery accuracy, we reflect this point in writing application.

• Journal of Chest Surgery
• /
• v.29 no.7
• /
• pp.780-784
• /
• 1996

The localized form of subaortic stenosis shows a spectrum of pathological lesions varing from dis- crete membrane to a thickened flbromuscular collar. Aortic valve is commonly involved late in the pro- cess resulting in regurgitation. Because of the likelihood o the progressive obstruction and aortic regurgitation, early elective oper- ation should be considered for the patient with subaortic stenosis. We experienced a case of localized fibromuscular subaortic stenosis associated with aortic regurgi- tation. Excision of the fibromuscular ridge and septal myectomy-myotomy relieved the subaortic seen- osis. Regurgitant aortic valve was repaired by peeling away the Hbrotic tissue on the cusps and subcommissural annuloplasty at the each commissural area. On postoperative echocardiographic examination, the systolic pressure gradient between left ventricle and aorta decreased markedly and the aortic regurgitation was not detected at all.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.1 s.41
• /
• pp.33-52
• /
• 1992

In order to get the basic information about the designing and manufacturing of special clothing which is suitable diplegia individuals, taking anthropometic measurements, the di-plegia's body dimension, standard dimension, their correlation, maximum, minimum, the relative deviation graph of Mollison and the body index were obtained. The writer examined their body development and abnormal somatotype and compared the difference with the normal somatotype. The results are as follows: 1 One characteristic of the body of diplegia individuals is that their lower parts are dis- proportionately developed, compared to their upper parts. 2. Diplegia individuals have smaller measurements than those of the normal; height, breadth, and circumference measurments of lower parts. And diplegia individuals have larger measur- ments; breadth and circumference measurements of upper parts, most of the length measur- ements. 3. In body index, diplegia individuals have lager measurments than those of the normals; most of index for stature and chest circumference and waist circumference index. And diplegia individuals have smaller measurments; most of the lower parts. 4. Change of somatotype according to age is unbalanced different from the normal's. 5. For the proportion of diplegia individuals, therefore a different pattern design of ciothing is required based on their special somatotype.

• Journal of Powder Materials
• /
• v.11 no.6 s.47
• /
• pp.451-461
• /
• 2004

Dry sliding wear behavior of electro-pressure sintered Co-Fe and Co-Ni compacts was investigated. Pin-on-disk wear tests were performed on the sintered Co-Fe, Co-Ni disks against alumina $(Al_2O_3)$ and silica $(SiO_2)$ balls at various loads ranging from 3N to 12N. A constant sliding speed of 0.1m/sec was employed. Wear rate was calculated by dividing the weight loss of a specimen by the measured specific gravity and sliding dis-tance. Worn surfaces and cross-sections of the specimens were examined using an SEM and EDS to investigate wear mechanism of the compacts. The wear behavior of the compacts were discussed as a function of their com-position. Effects of mechancial properties of the compact as well as oxide layers formed on wearing surface on the wear were also discussed.

• Korean Institute of Interior Design Journal
• /
• v.17 no.1
• /
• pp.170-177
• /
• 2008

If we consider the cubism, which newly attempted the avant-garde movement in the mid-19th century, was an experimental movement to feel the space through the human action and observation from various viewpoints at the fixed three-dimensional world, then the futurism was an innovative movement that obtained an ion from continual motions. However, the study about meaning and emotion that correspond with the dis-structuralization era could not have been continuing. Therefore, the goal of this study is to construct an emotional theory and grope a possibility of the way to do through some theoretical investigations and experimental analysis about body movement and emotional expression. For the study method, experiment and analysis have been proceeded based on Miyauji study(1992) which was based on P. Thiel theory that is about direct recognition and empirical study for identical existence or experimentation. As a result of the study, it reached several conclusions. The first, body movement as an emotion that makes meaning is related to the space. The second is that the space is related to the background as an object of body. The last is that body as a creature which becomes the one with spirit in the space makes meaning. We look forward to a possibility of emotional study through the body movement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.29-37
• /
• 2017

Intersection signal's phase time is calculated and determined by car and pedestrian traffic volume. If signal phase time and traffic volume dis-matched, cars and pedestrians have much delay time. This paper suggested an All-Red phase application method that cars and pedestrians securing safety and minimizing traffic signal waiting time. The key solution of this suggested method is determining All-Red phase operation by using sum of spare green time that have no passing cars. That is, total time of spare green time that have no passing cars is longer than All-Red phase time, operating All-Red phase has an effect. And case study carried out at the signalized intersection, revealed that this suggested method has much effectiveness.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.4
• /
• pp.231-237
• /
• 2006

This paper proposes an effective drive of high intensity discharge (HID) lamp ballast for cars. All control functions of the proposed ballast are implemented using a low-cost single chip microcontroller, PIC16C73 to optimize the total system size and to minimize cost through minimization of total component number. The proposed ballast generates high open-circuit voltage to ignite the lamp and is controlled to supply effectively the power required to shorten warm-up period after the breakdown. The DC-DC converter of the DC-AC converter part of the ballast utilizes the flyback converter topology that can minimize component number. Also, because to more minimize the ballast size, the transformer size must be minimized, for this, PWM (Pulse Width Modulation) pulses are generated with high frequency using the PWM module of the microcontroller. An analysis for this is explained, briefly. As if the operation of the lamp and ballast arrives at steady-state, then the ballast must AC-control the lamp, for this, the microcontroller utilizes the other PWM module. And the part related to the igniter is explained, briefly. It is shown through experimental results that the controller of the proposed ballast has good performance for the HID lamp for cars.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.369-392
• /
• 1998

In order to identify and describe the central core of fashion desire, the concept of“anti-aesthetics”and“open fashion”were analyzed based on the discourses of postmodernism dis-cussed in the field of sociology, culture, art and philosophy. In this paper, first, the new perspectives of fashion related to modernism and postmodernism were proposed, open concept, anti-aesthet-ics which is ephemerality but eternal ideology. Key principles of postmodernism as anti-aess-thetics mean the philosophy of nihilism proposed by Nietzsche indeterminency, the endd of original art(the death of art), the sublimity provided by Lyotard, and the pluralism to release human from the closed way of thinking, value, ideology. Second, the old and classical definition of fashion,“the differentiation of class”proposed by Veblen and Simmel has been changed into the“differentiation of taste”in postmodern condition. Third, the dichotomous system, that is, ration vs emotion, soul vs body, male vs female, culture vs nature, and so on has been deconstructed and disolved in the postmodern fashion phenomenon using the technique of anti-formalism, such as pastich, parody, bricolage an kitsch for the expression of sublimity and freedom of human.