• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.38.2-39
• /
• 2021

I will presents the analysis of the gas properties of the protoplanetary disk surrounding the young low-mass (about 1.2M_sun) triple star, GG Tau A. This work makes use of ALMA observations of rotational lines of CO (¹²CO, ¹³CO and C¹⁸O) together NOEMA observations of a few dozens of other molecules. While the CO emission gives information on the molecular layer close to the disk atmosphere, its less abundant isotopologues ¹³CO and C¹⁸O bring information much deeper in the molecular layer. I will present the analysis of the morphology and kinematics of the gas disk using the CO isotopologues. A radiative transfer model of the ring in CO isotopologues will also be presented. The subtraction of this model from the original data reveals the weak emission of the molecular gas lying inside the cavity. Thus, I am able to evaluate the properties of the gas inside the cavity, such as the gas dynamics, excitation conditions, and the amount of mass in the cavity. High angular resolution observations of CO reveals sprials induced by embedded planet(s) located near the 3:2:1 mean-motion resonance that help to explain the special morphology of the circumbinary disk. I also discuss some chemical properties of the GG Tau A disk. I report the first detection of H2S and C₂S in a protoplanetary disk. The molecule abundance relative to ¹³CO of about twenties other molecules will also be given. In GG Tau A, the detections of rare molecules such as H₂S and C₂S have been probably possible because the disk is more massive (a factor about 3-5) than other disks where the molecules was searched. Such a large disk mass makes the system suitable to detect rare molecules and to study cold-chemistry in protoplanetary disks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study was to evaluate the machining precision and the marginal and internal fit of single restorations fabricated with three types of lithium disilicate ceramic blocks and to evaluate the correlation. Materials and methods: Single restorations were designed using a CAD software program. The crown designed model file was extracted from the CAD software program. Three types of lithium disilicate blocks (Rosetta; HASS, IPS e.max CAD; Ivoclar vivadent, VITA Suprinity; VITA) were milled using a milling machine. For the fabrication of the crown scanned model file, the intaglio surface of the restoration was digitized using a contact scanner. Then, using the three-dimensional inspection software (Geomagic control X; 3D Systems), the process of the overlap of the crown designed model and the scanned model and 3-dimensional analysis was conducted. In addition, the marginal and internal fit of the crowns was evaluated by a silicone replication method. The difference among three types of single ceramic crown was analyzed using a Kruskal-Wallis H test, and Spearman correlation analysis was performed to analyze the correlation between machining precision and fitness (α=.05). Results: There was a significant difference in the machining precision and the marginal and internal fit according to the type of ceramic block (P<.001). In addition, the machining precision and the marginal and internal fit were positively correlated (P<.001). Conclusion: The marginal fit of crowns fabricated according to the types of ceramic blocks was within the clinically acceptable range (< 120 ㎛), so it can be regarded as appropriate machining precision applicable to all clinical as aspects in terms of the marginal fit.

• Economic and Environmental Geology
• /
• v.42 no.4
• /
• pp.289-300
• /
• 2009

The Geodo mine area, had been developed for Fe and Cu ores since 1963 and abandoned in recent decades, is located in the central part of the Taebaeksan mineralized district. This area comprises of the Jangsan, Myobong, Pungchon, Hwajeol, Dongjeom, and Dumugol Formations in ascending stratigraphic order. These Formations were intruded by the Cretaceous Eopyeong granitoids that appears to produce the Geodo skarn. Their compositions are relatively oxidized quartz monzodiorite to granodiorite (magnetite series, $Fe_2O_3/FeO=0.3{\sim}1.1$). Mineralizations related skarn deposit occur in the Myobong, Pungchon, and Hwajeol Formations. The proximal skarn is zoned from andraditic garnet ($Ad_{44-95}Gr_{1-53}$) predominant adjacent to the Eopyeong granitoids to diopsidic pyroxene ($Hd_{10-100}Di_{0-89}$) predominant away from the one. The differential proportion of garnet and pyroxene is generated by water/rock ratio and their source, such as magmatic and meteoric water. This is useful tool for assessment the overall oxidation state of the entire skarn system. Gold occurs in proximal red to brownish garnet skarn, and genetically associated with Bi- and Te-bearing minerals. Skarn deposit developed in the Geodo mine area is considered as oxidized Au skarn category, based on chemical composition of the Eopyeong granitoids, zonation of skarn, and gold occurrences. Garnet-rich skarn zone will be the main target for exploration of gold in the study area. However, it is needed to the detailed survey on vertical zonation of this area as well as lateral zonation. The result of this survey would provide an important basis for the exploration of the skarn Au deposit in the Geodo mine area.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.2
• /
• pp.559-562
• /
• 2012

Serum alpha-fetoprotein (AFP) is a significant marker for clinical diagnosis and prognosis evaluation in hepatocellular carcinoma (HCC) patients. However, some proportion of liver cancer patients are AFP-negative (AFP ${\leq}$20ng/ml). In order to study the differences between clinicopathological factors and prognosis of alpha-fetoprotein negative and positive patients, a total of 114 cases (41 AFP-negative and 73 AFP-positive) were selected for our research. By systematically statistical analysis, the results demonstrated that compared with AFP-negative patients, AFP-positive examples were more likely to feature cirrhosis nodules, non-complete neoplasm capsules, and a poor Edmondson-steiner grade. Furthermore, AFP-negative patients demonstrated a favorable long-term prognosis. By univariate analysis and multivariate analysis with Cox's proportional hazards model, multiple tumors were found to be independent risk factors for worse survival of AFP negative patients; however, less tumor-free margins, multiple tumors and Edmondson-steiner grades III/IV, proved to be independent risk factors leading to a poor prognosis of AFP positive cases. Finally, we can infer that high levels of AFP signify a highly malignant tumor and unfavorable prognosis.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.7 no.2
• /
• pp.164-176
• /
• 2000

Purpose : This study was done to identify the factors of decisional balance for smoking cessation among middle aged men in Korea. This was composed of a set of variables at the level of decision making when middle aged men decide to stop smoking. It was used to classify and identify the characteristics of the stages of change for smoking cessation to which the middle aged men belong, and was used to identify the variables of decisional balance which influenced the stages of change for smoking cessation in middle aged men. Methods : A convenience sample of 169 men who had smoked and were smoking, were between age 30 and 60 and lived in Seoul(mean age=44), were selected from the community. The data was collected from December 10, 1999 to February 28, 2000. The research instrument was the Decisional Balance Measure for Smoking Cessation (Velicer et al., 1985). and Stage of Change Measure(DiClemente et al., 1991). The data were analyzed using the SAS Program. Results : 1. According to stage of change measure, the 169 subjects were distributed in each stage of change for smoking cessation: in the pre-contemplation stage 63 subjects(32.7%), contemplation stage 60 subjects (35.5%), preparation stage 17 subjects(10.1%), and maintenance stage 29 subjects(17.2%). 2. Factor analysis identified 4 factors of decisional balance as appropriate factors for smoking cessation of middle aged men. There were named by the researchers; 1)'Perceived Burden to Self', 2)'Perceived Benefit to Others' 3)'Perceived Approval to Others', and 4)'Perceived Disapproval to Self'. 3. Analysis of variance showed that the three components, 1)'Perceived Burden to Self(F=8.50, P=.0001)', 2)'Perceived Benefit to Others(F=3.19, P=.025)' and 3)'Perceived DisApproval to Self(F=2.87, P=.038)were significantly associated with stage of change. 4. Through discriminant analysis, it was found that 'Perceived Burden to self' was the most influential variable in discriminating the four stages of change(pre-contemplation, contemplation, preparation, and maintenance). Conclusion : The results are consistent with the application of the Transtheoretical model, which has been used to understand how people change health behavior. Even though this study is a cross-sectional, not a longitudinal study, the findings of this study give useful information for smoking cessation intervention for the middle aged men.

• Smart Structures and Systems
• /
• v.26 no.5
• /
• pp.575-589
• /
• 2020

For vibration control of stay cables in cable-stayed bridges, viscous dampers are frequently used, and they are regularly installed between the cable and the bridge deck. In practice, neoprene rubber bushings (or of other types) are also widely installed inside the cable guide pipe, mainly for reducing the bending stresses of the cable near its anchorages. Therefore, it is important to understand the effect of the bushings on the performance of the external damper. Besides, for long cables, external dampers installed at a single position near a cable end can no longer provide enough damping due to the sag effect and the limited installation distance. It is thus of interest to improve cable damping by additionally installing dampers inside the guide pipe. This paper hence studies the combined effects of an external damper and an internal damper (which can also model the bushings) on a stay cable. The internal damper is assumed to be a High Damping Rubber (HDR) damper, and the external damper is considered to be a viscous damper with intrinsic stiffness, and the cable sag is also considered. Both the cases when the two dampers are installed close to one cable end and respectively close to the two cable ends are studied. Asymptotic design formulas are derived for both cases considering that the dampers are close to the cable ends. It is shown that when the two dampers are placed close to different cable ends, their combined damping effects are approximately the sum of their separate contributions, regardless of small cable sag and damper intrinsic stiffness. When the two dampers are installed close to the same end, maximum damping that can be achieved by the external damper is generally degraded, regardless of properties of the HDR damper. Field tests on an existing cable-stayed bridge have further validated the influence of the internal damper on the performance of the external damper. The results suggest that the HDR is optimally placed in the guide pipe of the cable-pylon anchorage when installing viscous dampers at one position is insufficient. When an HDR damper or the bushing has to be installed near the external damper, their combined damping effects need to be evaluated using the presented methods.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.246-252
• /
• 2015

In steel factory, hot roller cleaning process produces a lot of iron oxide particles called as mill scale. Major components of these particles are wustite (FeO), magnetite ($Fe_3O_4$), and hematite ($Fe_2O_3$). In this study, we tried to produce pure magnetite from the mill scale because of the largest phosphate adsorption capacity of the magnetite. The mill scale was treated with acid (HCl+$H_2O_2$), base (NaOH), and acid-base ($H_2SO_4$+NaOH). Batch adsorption tests showed the acid and/or base treatment could increase the phosphate adsorption capacity of the iron oxides from 0.28 to over 3.11 mgP/g. Magnetite, which could be obtained by acid and base treatment of the mill scale, showed the best adsorption capacity. From the kinetic analysis, both Freundlich and Langmuir isotherm well described the phosphate adsorption behavior of the magnetite. In Langmuir model, maximum phosphate adsorption capacity was found to be 5.1 mgP/g at $20^{\circ}C$.

• Journal of Ginseng Research
• /
• v.41 no.2
• /
• pp.169-179
• /
• 2017

Background: Ginsenosides are the main pharmacological components of Panax ginseng root, which are thought to be primarily responsible for the suppressing effect on oxidative stress. Methods: 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity and oxygen radical absorption capacity were applied to evaluate the antioxidant activities of the ginsenosides. Human embryonic kidney 293 (HEK-293) cells were incubated with ginsenosides extracted by pulsed electric field (PEF) and solvent cold soak extraction (SCSE) for 24 h and then the injury was induced by $40{\mu}M$ $H_2O_2$. The cell viability and surface morphology of HEK-293 cells were studied using MTS assay and scanning electron microscopy, respectively. Dichloro-dihydro-fluorescein diacetate fluorescent probe assay was used to measure the level of intracellular reactive oxygen species. The intracellular antioxidant activities of ginsenosides were evaluated by cellular antioxidant activity assay in HepG2 cells. Results: The PEF extracts displayed the higher 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity and stronger oxygen radical absorption capacity (with an oxygen radical absorption capacity value of $14.48{\pm}4.04{\mu}M\;TE\;per\;{\mu}g/mL$). The HEK-293 cell model also suggested that the protective effect of PEF extracts was dose-dependently greater than SCSE extracts. Dichloro-dihydro-fluorescein diacetate assay further proved that PEF extracts are more active (8% higher than SCSE extracts) in reducing intracellular reactive oxygen species accumulation. In addition, scanning electron microscopy images showed that the HEK-293 cells, which were treated with PEF extracts, maintained more intact surface morphology. Cellular antioxidant activity values indicated that ginsenosides extracted by PEF had stronger cellular antioxidant activity than SCSE ginsenosides extracts. Conclusion: The present study demonstrated the antioxidative effect of ginsenosides extracted by PEF in vitro. Furthermore, rather than SCSE, PEF may be more useful as an alternative extraction technique for the extraction of ginsenosides with enhanced antioxidant activity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.141-141
• /
• 2013

We have generated the needle-typed nonthermal plasma jet by using an Ar gas flow at atmospheric pressure. Diagnostics of electron temperature anddensity is critical factors in optimization of the atmospheric plasma jet source in accordance with the gas flow rate. We have investigated the electron temperature and density of plasma jet by selecting the four metastable Ar emission lines based on the atmospheric collisional radiative model and radial profile characteristics of current density, respectively. The averaged electron temperature and electron density for this plasma jet are found to be ~1.6 eV and ~$3.2{\times}10^{12}cm^{-3}$, respectively, in this experiment. The densities of OH radical species inside the various bio-solutions are found to be higher by about 4~9 times than those on the surface when the argon bioplasma jet has been bombarded onto the bio-solution surface. The densities of the OH radicalspecies inside the DI water, DMEM, and PBS are measured to be about $4.3{\times}10^{16}cm^{-3}$, $2.2{\times}10^{16}cm^{-3}$, and $2.1{\times}10^{16}cm^{-3}$, respectively, at 2 mm downstream from the surface under optimized Ar gas flow 250 sccm.

• Journal of Korean Medicine for Obesity Research
• /
• v.15 no.1
• /
• pp.9-23
• /
• 2015

Objectives: This study was investigated the improvement effects of Pakistani Ephedra herba-containing Gangji-hwan-1, 2, 3 (Di-fatty; DF-1, 2, 3), Chinese Ephedra herba-containing Gangjihwan-4 (DF-4) and combination of DF-1 and Gamisoche-hwan (GSH) on obesity in a high fat diet-fed obese mouse model. Methods: Eight-week-old C57BL/6N mice were divided into seven groups: a normal lean group given a standard diet, an obese control group given a high fat diet, and DF-1, 2, 3, 4, and DF-1+GSH groups given a high fat diet with DF-1, 2, 3, 4 (40, 80, 160, 80 mg/kg), and DF-1+ GSH (80 mg/kg), respectively. After 8 weeks of treatment, body weight gain, feeding efficiency ratio (FER), blood lipid markers, liver histology, and fat weight and histology were examined. Results: Body weight gain was significantly decreased in DF and DF-1+GSH groups compared with control. The extent of decreases was eminent in DF-1+GSH group. FER and circulating concentration of leptin were decreased in DF and DF-1+GSH groups compared with control. Circulating concentrations of triglyceride, glucose and insulin were decreased in DF and DF-1+GSH groups compared with control. The size of adipocytes were decreased by DF and DF-1+GSH groups compared with control, whereas the adipocyte number per unit area was increased by them, suggesting that DF and DF-1+GSH groups decreased the number of large adipocytes. Conclusions: In conclusion, these results suggest that DF and DF-1+GSH groups decrease FER, plasma leptin concentration, blood anti-obesity biomarkers and fat mass, improves body weight gain. In addition, these effects were more effective in DF-1+GSH combination group than in DF-1, 2, 3, 4 groups.