• 제목/요약/키워드: DFT Filter

검색결과 57건 처리시간 0.027초

Design of M-Channel IIR Uniform DFT Filter Banks Using Recursive Digital Filters

  • Dehghani, M.J.;Aravind, R.;Prabhu, K.M.M.
    • ETRI Journal
    • /
    • 제25권5호
    • /
    • pp.345-355
    • /
    • 2003
  • In this paper, we propose a method for designing a class of M-channel, causal, stable, perfect reconstruction, infinite impulse response (IIR), and parallel uniform discrete Fourier transform (DFT) filter banks. It is based on a previously proposed structure by Martinez et al. [1] for IIR digital filter design for sampling rate reduction. The proposed filter bank has a modular structure and is therefore very well suited for VLSI implementation. Moreover, the current structure is more efficient in terms of computational complexity than the most general IIR DFT filter bank, and this results in a reduced computational complexity by more than 50% in both the critically sampled and oversampled cases. In the polyphase oversampled DFT filter bank case, we get flexible stop-band attenuation, which is also taken care of in the proposed algorithm.

  • PDF

DFT 기반 페이저 연산 시 새로운 저역통과필터를 이용한 고주파 노이즈 경감 방법 (High Frequency Noise Reduction Method Using a Newly Designed Low-pass Filter in DFT-Based Phasor Estimation)

  • 백민우;강상희
    • 전기학회논문지
    • /
    • 제66권6호
    • /
    • pp.898-904
    • /
    • 2017
  • DFT(Discrete Fourier Transform) is one of the most widely used method to estimate the phasor of a relaying signal. The harmonics are eliminated by the DFT. However, high frequency components, except for harmonics, are not removed and cause an error in DFT-based phasor estimation process. This paper suggests high frequency noise reduction method by using a newly designed low-pass filter to estimate a signal phasor. When selecting a stop-band cut-off frequency of the low-pass filter, high frequency components generated by faults are considered. To reduce the phasor estimation delay caused by a low-pass filter, this paper proposes a low-pass filter whose settling time is reduced. An adverse effect of high frequency noise on DFT-based phasor estimation is reduced. To evaluate the performance of the proposed method, signals which are collected under a fault condition at a 345[kV] transmission system modeled by EMTP-RV are used.

Active Damping for Wind Power Systems with LCL Filters Using a DFT

  • Lee, June-Seok;Jeong, Hae-Gwang;Lee, Kyo-Beum
    • Journal of Power Electronics
    • /
    • 제12권2호
    • /
    • pp.326-332
    • /
    • 2012
  • This paper proposes a simple active damping algorithm for small-scale wind power systems with an LCL filter. Compared to an L filter or an LC filter, an LCL filter can decrease the harmonics induced by low switching frequencies and produce a satisfactory grid-side current using a comparatively low inductance. Additional active damping of the filter resonance is necessary when an LCL filter is used. This paper introduces an active damping method using a Discrete Fourier Transform (DFT) filter to improve performance without additional sensors or complexity. Experimental results are shown to verify the validity of the proposed algorithm as an active damping method.

고속의 주파수 계측 알고리즘을 갖는 저주파 계전기 설계 (The Design of UFR with Fast Frequency Measurement Technique)

  • 박종찬;김병진
    • 전기학회논문지P
    • /
    • 제55권1호
    • /
    • pp.1-5
    • /
    • 2006
  • In this paper, the frequency estimator and DFT filter gain compensation for UFR(Under Frequency protection Relay) is introduced. Due to the sudden appearance of generator loads or faults in power system, the frequency is supposed to deviate from its nominal value. Because a frequency calculation is based on phase information, it needs sufficient sampling data to figure out a precious frequency. Therefore the frequency measurement for UFR needs excellent qualities such as high speed and precision with low sampling frequency Authors propose the frequency estimator which compares the vector differences and the DFT filter gain compensation which identifies DFT filter error and correct it. Using the frequency estimator and compensation, UFR which has the 0.01[ms] calculation delay and 0.003[Hz] measurement error is implemented with digital processor.

DFT Spreading을 사용한 5세대 이동통신 후보 변조기술의 PAPR 평가 및 분석 (PAPR Evaluation and Analysis of Candidate Waveforms Using DFT Spreading for 5G Mobile Communications)

  • 안창영;유흥균
    • 한국전자파학회논문지
    • /
    • 제26권12호
    • /
    • pp.1091-1099
    • /
    • 2015
  • 5세대 이동통신을 위한 후보 변조기술들로 다수의 부반송파를 사용하는 UFMC(Universal-Filtered Multi-carrier) 및 FBMC(Filter Bank Multi-carrier)가 주목받고 있다. 그러나 이러한 변조기술들은 다수의 부반송파 신호의 중첩으로 인하여 높은 PAPR(Peak to Average Power Ratio) 특성을 갖는다. 본 논문은 5세대 이동통신을 위한 후보 변조기술들의 PAPR 문제를 해결하기 위하여 DFT(Discrete Fourier Transform) spreading 기법을 응용한 DFT-s(spreading)-UFMC 및 DFT-s-FBMC 시스템을 제안한다. 제안하는 시스템들의 PAPR 성능을 비교 평가하기 위하여 기존의 OFDM(Orthogonal Frequency Division Multiplexing), UFMC, FBMC, DFT-s-OFDM 시스템과 제안하는 DFT-s-UFMC, DFT-s-FBMC 시스템을 설계하고, 시뮬레이션을 통해 신호 특성 확인과 PAPR 성능 평가 및 비교 분석을 수행하였다. 시뮬레이션의 결과로 DFT-s-OFDM과 같이 UFMC 및 FBMC에 DFT spreading 기법을 응용할 경우, 기존의 시스템 대비 각각 OFDM은 2.7 dB, UFMC는 2.8 dB, FBMC는 1.1 dB 정도 PAPR 성능이 향상되는 것을 확인하였다.

비선형 HPA 환경에서 DFT Spreading 기반 5세대 후보변조기술의 BER 성능 비교와 평가 (BER Performance Comparison and Evaluation of 5G Candidate Waveforms Based on DFT Spreading under the Nonlinear HPA)

  • 안창영;유흥균
    • 한국통신학회논문지
    • /
    • 제41권4호
    • /
    • pp.415-423
    • /
    • 2016
  • 높은 PAPR(Peak-to-Average Power Ratio)은 HPA(High Power Amplifier) 비선형성에 의해 시스템의 성능을 열화 시키고, 스펙트럼의 OOB(Out-of-Band) 전력을 향상시키는 문제의 원인이 된다. 5세대 이동통신 시스템을 위한 후보변조기술로 UFMC(Universal Filtered Multi-Carrier) 및 FBMC(Filter Bank Multi-Carrier) 시스템이 있다. 본 논문에서는 PAPR 저감 기법으로 잘 알려진 DFT-s(Discrete Fourier Transform Spreading) 기법을 각 시스템에 적용하고, 비선형 HPA 환경에서 각각의 성능에 대하여 비교분석하였다. 우선, 본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing), UFMC, FBMC 시스템에 대해서 설명을 하며, 각 시스템에 DFT spreading 기법을 적용한 DFT-s-OFDM, DFT-s-UFMC, DFT-s-FBMC 시스템에 대해 설명한다. 본 논문에서는 비선형 모델로 Saleh 모델을 사용하였으며, 다양한 강도의 HPA 비선형성을 고려하여 시뮬레이션을 수행하였다. 시뮬레이션 결과, OFDM 및 UFMC 시스템의 경우 PAPR을 효과적으로 저감시킬 수 있으며, FBMC의 경우 PAPR 저감은 이루어지나 그 효과가 크지 않음을 확인하였다.

잡음영향의 저감을 위한 두 디지털 필터들의 사용에 의한 DFT 기반의 계통주파수 추정 (DFT-based Power System Frequency Estimation using Two Digital Filters for Noise Effect Reduction)

  • 황진권
    • 전기학회논문지
    • /
    • 제62권7호
    • /
    • pp.891-897
    • /
    • 2013
  • The power system frequency plays an important role in monitoring and controlling the power system. The frequency can be measured through discrete Fourier transform (DFT) coefficients of its positive fundamental frequency. The accuracy of the frequency estimate is severely affected by noise in the power system signal and the leakage effect of the negative fundamental frequency in DFT. This paper proposes a DFT-based frequency estimation algorithm to cope with the noise as well as the leakage effect. In this algorithm, two suitable digital filters are introduced to reduce efficiently frequency estimate error due to the noise. These filters are designed to use a digital bandpass filter and a second-degree integrator. The effectiveness of the proposed algorithm in reduction of frequency estimate error is verified through simulations on noise, harmonics and frequency deviation.

무정보 blur 이미지 복구를 위한 DFT 변환 (A DFT Deblurring Algorithm of Blind Blur Image)

  • 문경일;김철
    • 정보교육학회논문지
    • /
    • 제15권3호
    • /
    • pp.517-524
    • /
    • 2011
  • 어떠한 현상 혹은 사물의 이미지를 학생들에게 제공하는데 있어서 여러 가지 원인에 의해 초점이 흐리거나 혹은 흔들린 이미지들이 등장하여 학생들에게 보여주기가 힘든 경우가 빈번하게 발생한다. 특히, 이미지에 대한 구체적인 정보가 없는 경우에는 그 이미지는 쓸모가 없는 것이 된다. 본 연구는 무정보 블러링 이미지를 아주 빠른 시간 내에 복구할 수 있는 2차원 DFT 기반의 하나의 블러링 제거 알고리즘을 제안하는데 있다. 제안된 방법의 빠른 처리 속도는 이산 푸리에 변환, 변환의 필터링과 회선 관계 및 Moore-Penrose 역행렬의 효과적인 계산 방식을 바탕으로 한다. 특히, 필터의 주파수 응답에 관한 처리는 유용한 회선 공식을 유도한다. 제안된 방법의 구현은 보통 크기의 블러링 이미지에 적용했을 때, 아주 빠른 시간 내에 블러링 효과를 제거시킬 수 있고, 보다 선명한 이미지를 제공할 수 있음을 보인다.

  • PDF

1회선 송전선로 단락사고의 개선된 고장점 표정기법 (Enhanced Fault Location Algorithm for Short Faults of Transmission Line)

  • 이경민;박철원
    • 전기학회논문지
    • /
    • 제65권6호
    • /
    • pp.955-961
    • /
    • 2016
  • Fault location estimation is an important element for rapid recovery of power system when fault occur in transmission line. In order to calculate line impedance, most of fault location algorithm uses by measuring relaying waveform using DFT. So if there is a calculation error due to the influence of phasor by DC offset component, due to large vibration by line impedance computation, abnormal and non-operation of fault locator can be issue. It is very important to implement the robust fault location algorithm that is not affected by DC offset component. This paper describes an enhanced fault location algorithm based on the DC offset elimination filter to minimize the effects of DC offset on a long transmission line. The proposed DC offset elimination filter has not need any erstwhile information. The phase angle delay of the proposed DC offset filter did not occurred and the gain error was not found. The enhanced fault location algorithm uses DFT filter as well as the proposed DC offset filter. The behavior of the proposed fault location algorithm using off-line simulation has been verified by data about several fault conditions generated by the ATP simulation program.

주파수 도약 통신위성 중계기의 다상 DFT 필터뱅크 과도기 응답 분석 (Analysis on the transient response of Polyphase DFT filter banks in the frequency hopping communication satellite transponder)

  • 이대일;주재관
    • 한국항공우주학회지
    • /
    • 제42권7호
    • /
    • pp.610-615
    • /
    • 2014
  • 통신위성 중계기에서 효과적인 다중채널 처리를 위하여 여러 가지 필터뱅크들이 사용되어져 왔다. 특히 구현의 간단함으로 인하여 대역폭이 일정한 복수의 다중채널을 다루는 경우 다상 DFT 필터뱅크가 광법위하게 사용되어져 왔다. 하지만 주파수도약 통신위성 중계기에서 Polyphase DFT 필터뱅크를 사용하여 다중채널 처리를 할 경우 주파수 도약 홉과 홉 사이에서 발생하는 비정상적인 과도기 응답으로 인하여 다상 DFT 필터뱅크의 사용에 있어 제약이 발생할 수 밖에 없다. 본 논문에서는 주파수 도약 환경에서의 비정상적인 다상 DFT 필터뱅크의 과도기 응답을 분석하고 해당 문제를 해결 할 수 있는 방법을 제시하며 모의실험을 통하여 제안된 방법의 효율성을 보인다.