• International Journal of Quality Innovation
• /
• 제6권3호
• /
• pp.121-131
• /
• 2005

Six Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as the process of a solving problem. Enterprises already propelling Six Sigma successfully, such as Motorola, GE and consulting companies, also traditionally propose DMAIC methodology. But, from activating Six Sigma, enterprises and Six Sigma-consulting companies propose Six Sigma methodology matching indirection part of office and R&D part. As an example, DFSS (Design For Six Sigma) is part of R&D application in GE. This study investigates Six Sigma methodology corresponding to the Right Process of the kernel factor. Especially for the optimum design of R&D, the study revises the definition of DFSS and the general organization through Lean DFSS methodology research and analysis.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.193-201
• /
• 2003

The problem of brake judder is typically caused by defects of quality manufacturing. DFSS (Design for six sigma) is a design process for quality improvement. DFSS will result in more improved but less expensive quality products. This paper presents an implementation of DFSS for quality improvement of the brake judder of heavy-duty trucks. Carrying out 5 steps of DFSS, the major reasons for defects of quality are found. The numerical approximation of the brake system is derived by means of the response surface method. Its quality for brake judder is improved by using the sigma based robust design methodology. Results are compared between the conventional deterministic optimal design and the proposed sigma based robust design. The proposed one shows that manufacturing cost may increase as the quality level increase. The proposed one, however, is more economical in aspect of the overall cost since the probability of failure dramatically goes down.

• Industrial Engineering and Management Systems
• /
• 제10권3호
• /
• pp.232-237
• /
• 2011

Design for Six Sigma (DFSS) has been implemented in many companies to enhance their business performance and customer satisfaction. However, DFSS has not been widely applied to the aircraft industry which operates large, complex development programs. In this paper, the characteristics of an aeronautical product development program are analyzed to figure out the limitations of current DFSS methodology and the prerequisite to deployment of DFSS at the program level is suggested.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.316-326
• /
• 2012

Purpose: In this paper, a Design for Six Sigma(DFSS) methodology based on DMADV(Define-Measure-Analyze-Design-Verify) roadmap is presented. Methods: DFSS tools are given for each DMADV phase which is suitable for the aircraft development process. A cost reduction case study of a navigation simulation is demonstrated. Results: DFSS roadmap are presented with implementation tools for each phase. Conclusion: We propose a DFSS methodology which can benefit the design and development personnel to implement DFSS not only in aircraft industry but also in other order-based industries in general.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.211-216
• /
• 2004

6 Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as process of solving problem. Enterprise already propelling successfully 6 sigma such as Motorolla, GE and consulting companies leading 6 sigma also propose DMAIC methodology traditionally But from making 6 sigma activated, enterprises and 6 sigma consulting companies propose 6 sigma methodology matching office indirection part and research and development part. As the forward example, DFSS(Design For Six Sigma) is R&D part application in GE. This study investigates 6 sigma methodology corresponding to Right Process of the kernel factor. Especially for optimum design of the R&D part, revise DFSS definition and general concept organization through DFSS methodology research and analysis.

• Industrial Engineering and Management Systems
• /
• 제11권4호
• /
• pp.346-352
• /
• 2012

While systems engineering has been widely applied to complex system development, some evidences are reported about major budget and schedule overruns in systems engineering applied. On the other hand, many organizations have been deploying Design for Six Sigma (DFSS) to build Six Sigma momentums in the area of design and development for their products and processes. To explore the possibility of having a DFSS complement systems engineering process, this process reviews the systems engineering with their categories of effort and DFSS with its methodologies. A comparison of the systems engineering process and DFSS indicates that DFSS can be a complement to systems engineering for delivering higher quality products to customers faster at a lower cost. We suggest a simplified framework of systems engineering process, that is, PADOV which was derived from the generic systems engineering process which has been applied to the development of T-50 advanced supersonic trainer aircraft by Korea Aerospace Industries (KAI) with technical assistance of Lockheed Martin. We demonstrated that each phase of PADOV framework is comprehensively matched to the pertinent categories of systems engineering effort from various standards.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1334-1337
• /
• 2007

A steel pallet to carry lighter logistic articles is developed based on the DFSS(design for Six Sigma) methodology. Combining the conventional DFSS(Design For Six Sigma) methodology with that of VE(Value Engineering) is the novel feature of this paper to achieve maximum cost reduction. In this paper, systematical steps to achieve the required structural spec's are presented by conventional DMEDI(Define-Measure-Explore-Develop-Implement) process. To imply the target costing, evaluation of functions consisting of the pallet has been performed by value methodology. Then best design concept is selected in the Explore step, following structural optimization utilizing FEM. Finally the performance of prototype is investigated by pilot test in the Implement step. The developed steel pallet is being commercialized in the fields of automated ware house.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.431-436
• /
• 2006

6 Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as process of solving problem. Enterprise already propelling successfully 6 sigma such as Motorolla, GE and consulting companies leading 6 sigma also propose DMAIC methodology traditionally. But from making 6 sigma activated, enterprises and 6 sigma consulting companies propose 6 sigma methodology matching office indirection part and research and development part. As the forward example, DFSS(Design For Six Sigma) is R&D part application in GE. This study investigates 6 sigma methodology corresponding to Right Process of the kernel factor. Especially for optimum design of the R&D part, revise DFSS definition and general concept organization through Lean DFSS methodology research and analysis.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.454-461
• /
• 2010

Six sigma is a business management strategy and is used to improve the quality of the products and processes in many organizations. However traditional six sigma methodology, namely DMAIC, is not suitable for developing products. This paper investigates DFSS methodologies and presents a DFSS methodology for order based industry. Specifically, we suggest a customized DMADV method for order based industry and present a case study for developing a configuration optimization of the flying simulators.

• 품질경영학회지
• /
• 제33권2호
• /
• pp.74-86
• /
• 2005

The project objectives, called critical-to-quality (CTQs) in six sigma, should be defined to faithfully reflect the customer requirements. The identification of such a set of CTQs, which is currently done using brainstorming in practice, is a challenging task. Notwithstanding the rapid growth of the six sigma literature, development of a systematic procedure for identifying CTQs has scarcely been addressed. This paper proposes a systematic method for generating CTQ candidates based on the given voice of the customer in the DFSS/C (Design for Six Sigma / Commercial) context. By providing a step-by-step procedure, the proposed method ensures that all the important CTQ candidates are identified and subjective judgments are minimally required. Hence, the shortcomings associated with the existing practice based on brainstorming can be effectively overcome. The unique characteristics of the proposed method are also demonstrated via a case study.