• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.63-69
• /
• 1999

Center of photon mass, defined as the center of axial photon distribution in each half, is proposed as a unified design parameter in quarter wavelength shifted(QWS) DFB lasers. Shown is the way the parameter is related to the threshold pain difference and uniformity in axial photon density, which determine single-frequency stability of DFB lasers. Also, a general rule for single-frequency DFB laser design is presented. Using the design rule, we propose a sampled grating QWS-DFB laser that has a wider $_KL$ range 0f 100% single-frequency yield.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.08a
• /
• pp.272-273
• /
• 2001

Normalized gain difference for index-coupled and quarter wavelength shifted DFB lasers for various facet reflectivities are calculated as a function of facet phases.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.71-78
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB lasers have low lasing frequency shift during high speed current modulation. In this paper, we have developed a simulation software and analysed beam profiles of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. As the phases of the index and gain gratings on the mirror faces are varied, the beam profiles |R(z)| and |S(z)| of the lasing mode with the emitted power ratio P_l/p_r are analysed and examined. In order to reduce the threshold current of a lasing mode and enhance the frequency stability, κL should be greater than 8, regardless of the grating phases on the mirror faces.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.46-53
• /
• 2002

A novel ultra-narrow linewidth single longtudinal mode DFB semiconductor laser in the extended FBG cavity is proposed. The 3㏈ linewidth of 20KHz was demonstrated by using self-heterodyne measurement set-up with a fiber delay line of 63km. And this linewidth was further compressed to less than 3KHz, which is resolution limited performance, by inserting E $r^{+3}$ doped fiber saturable absorber. This is equivalent to 3㏈ linewidth of 2$\times$10$^{-8}$ nm.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.113-119
• /
• 1994

We fabricated and characterized RWG-DFB-LDs emitting at $1.3\mu\textrm{m}$ wavelength. For fabrication of the laser diode, inteference fringe of optical beams was used for grating formation and epi layers were grown by LPE. The fablicated RWG-DFB-LD operated in a single longitudinal mode with more than 30 dB SMSR at 1296.5 nm emitting wavelength and its threshold current was 67 mA. Coupling coefficient (K) was estimated as $40cm^{-1}$ by means of stop-band measurement. Finally, we show that the RWG-DFB-LD fabricated in this experiment can be applicable as light source of 2.5 Gbps optical communication system from the fact that the small signal response of the RWG-DFB-LD rated up to 1.99 GHz at pre-bias level of $1.2 I_{th}$..

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.96-99
• /
• 2005

As the demand of internet networks using backbone communication systems recently increased, the researches on the high-speed wideband optical communication systems are required. For high-speed optical communication systems, asymmetric sampled grating distributed feedback laser diodes (DFB-LDs) are developed and the reliability of DFB-LDs is examined. The reliability of DFB-LDs is performed by monitoring I-V and L-I characteristics and two degradation phenomena related to the electrical characteristics of LDs are observed during the life tests. The first degradation phenomenon by increasing the reverse current is considered as a formation of leakage current path enough to prevent lasing operation in lateral blocking layer near active region of lasers. The second degradation phenomenon by decreasing the forward current is considered as activation of non-radiative Auger recombination process by thermal energy and the second degradation phenomenon is recovered after the off-test period at room temperature Eventually, evaluating the reliability of DFB LDs can allow us to improved the manufacturability in high-volume manufacturing.

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.218-219
• /
• 1999

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.222-223
• /
• 1999

The structural dependence of harmonic and intermodulation distortion characteristics in 1.55${\mu}{\textrm}{m}$ DFB-LCD were investigated. The linearity of 1.55${\mu}{\textrm}{m}$ DFB-LD was greatly improved by employing a partially corrugated structure.

• Journal of the Optical Society of Korea
• /
• v.8 no.1
• /
• pp.13-16
• /
• 2004

A widely tunable SG-DFB (Sampled Grating Distributed Feedback) laser diode is proposed and its feasibility is confirmed through simulation. The new SG-DFB laser diode is composed of a pair of sampled gratings, some parts of which are gain sections and the other parts of which are phase control sections. It is shown that a few tens of nanometers can be tuned through the adjustment of two currents into the phase control sections. Higher output power is expected compared with a SG-DBR laser diode with similar parameters. The dynamic single mode operation is also observed in the time-domain simulation.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.429-433
• /
• 2000

A study of the tunable fiber DFB laser using PZT-stretcher is presented. The device has an laser ocsillator by using a fiber Bragg grating at 1559.4 nm written directly into a 3-cm long $Er^{3+}$ doped fiber. Post UV-exposure method to provide the necessary phase shift is used for a single mode operation. The device shows the single mode operation of $230\muW$ output power and has a narrow linewidth of 35 kHz. The lasing wavelength of the laser can be tuned in a range of 3 nm by stretching the grating.rating.