• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.226-229
• /
• 2003

본 논문은 Uncooled DFB-LD를 광원으로 사용하는 일반적인 8채널 구조의 CWDM시스템에 대해 메트로 파장대를 사용하여 최대 15채널까지 증설이 가능한 시스템 구조에 대한 제안 및 특성을 시뮬레이션 하였다.

• Clean Technology
• /
• v.22 no.3
• /
• pp.203-207
• /
• 2016

Here, we report a novel fabrication technique for patchable organic lasing sheet based on non-volatile liquid organic semiconductors and freestanding polymeric film with high flexibility and patchability. For this work, we have fabricated the second-order DFB grating structure, which leads to surface emission, embedded in the freestanding polymeric film. Using an ultra-violet (UV) curable polyurethaneacrylate (PUA) mixture, the periodic DFB grating structure can be easily prepared on the freestanding polymeric film via a simple UV curing process. Due to unsaturated acrylate remained in the PUA mixture after UV curing, the freestanding PUA film provides adhesive properties, which enable mounting of the patchable organic lasing sheet onto non-flat surfaces with conformal contact. To achieve laser actions in the freestanding resonator structure, a composite material of liquid 9-(2-ethylhexyl)carbazole (EHCz) and organic laser dyes was used as the laser medium. Since the degraded active materials can be easily refreshed by a simple injection of the liquid composite, such a non-volatile liquid organic semiconducting medium has degradation-free and recyclable characteristics in addition to other strong advantages including tunable optoelectronic responses, solvent-free processing, and ultimate mechanical flexibility and uniformity. Lasing properties of the patchable organic lasing sheet were also investigated after mounting onto non-flat surfaces, showing a mechanical tunability of laser emission under variable surface curvature. It is anticipated that these results will be applied to the development of various patchable optoelectronic applications for light-emitting displays, sensors and data communications.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.168-174
• /
• 2000

A diode laser sensor system based on absorption spectroscopy techniques has been developed to measure $CO_2$ concentration and temperature non-intrusively in high temperature combustion environments using a 2.0 ${\mu}m$ DFB(Distributed Feedback) laser. Two optics was fabricated in pig-tail fashion and all optical components were implemented in a single box. The evolution of measurement sensitivity was done using test cell by changing sweep frequency and $CO_2$ concentration. Gas temperature was determined from the ratio of integrated line strengths. Species concentration was determined from the integrated line intensity and the measured temperature. The result show that the system has 2% error in wide operation frequency range and accuracy of $CO_2$ concentration was about 3%. The system was applied to measure temperature and concentration in the combustion region of a premixed $CH_4$ +air triangular flame. The measurement results of gas temperature agreed well with thermocouple results. Many considerations were taken into account to reduce optical noise, etalon effect, beam steering and base line matching problem. The evaluations results and actual combustion measurement demonstrate the practical and applicability for in-situ and real time combustion monitoring in a practical system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.140-146
• /
• 1989

In many situations, radar targets are embedded in a clutter environment and clutter rejection is required. The clutter is unwanted radar echoes and may arise owing to reflections from ground and weather disturbances and statistical properties of the clutter vary with range and azimuth as well as time. That is, adaptive signal processing is required. In this paper, a clutter suppression algorithm based on the clutter whitening filter (WF) and doppler filter bank(DFB) is described which provides improved performance compared with conventional nonadaptive clutter suppression algorithm that is the cascaded moving target indicator (MTI) and (DFB). The clutter whitening filter algorithm is based on the Burg's maximum entropy method.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.313-318
• /
• 2011

The effects of external continuous wave optical injection on spectral comb of a 10 GHz harmonically mode-locked semiconductor fiber ring laser have been studied. Greater than 40 dB spectral deeps in the spectral comb and greater than 30 dB reduction of supermode beating noise are achieved by injecting coherent light with ~ 100 KHz spectral width. To examine the possibility of using a low-cost seed source, we replace the seed source by a DFB laser with ~ 10 MHz spectral width. It shows similar spectral deeps, however supermode beating noise enhancement, rather than reduction, is observed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1968-1973
• /
• 2013

We present the enhancement of narrowband modulation response of an optical source by integrating a dual-electrode distributed feedback (DFB) laser with an electro-absorption modulator (EAM). The dual-electrode DFB laser exhibits a multiple optical modes owing to a self-pulsation in GHz range. By modulating the laser and modulator sections of the integrated device simultaneously, 20-dB of narrowband modulation response enhancement at 6 GHz with 7-GHz tuning range has been observed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.188-189
• /
• 2002

기간망의 속도 증가와 더불어 가입자망치 고속화는 필수 불가결한 것으로 이를 위해 메트로 네트웍의 고속화에 대한 노력이 진행되고 있다. 메트로 네트웍 및 가입자망의 고속화를 위해서는 시스템의 저가화가 필요하다. CWDM(Coarse WDM)은 채널 간격이 10 - 25nm로 채널 간격이 넓기 때문에 복잡한 온도제어 없이 저가의 Uncooled DFB-LD 및 WDM 소자를 사용할 수 있어서, 메트로 네트웍의 대용량화를 보다 경제적으로 실현가능하기 때문에 CWDM 시스템이 유망한 것으로 받아들여지고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.121-125
• /
• 1991

A basic coherent optical transmission was demonstrated using FSK modulation and heterodyne detection scheme. Optical frequency of DFB LD light source at the transmitter side was stabilized with Fabry Perot etalon and bias feedback circuit. A tunable external cavity LD was used as a local oscillator at the receiver. Heterodyned output signal at IF frequency of 2GHz was measured and discussed.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1783-1786
• /
• 2003

In this paper, an automated line-defect detection method for TFT-LCD panel is presented. A DFB(Directional Filter Bank) and line-projection method are used to find line-defect which is one of the major defects occurred in TFT-LCD panel. The experimental results show that the proposed algorithm gave promising results for applying automated inspection technique for TFT-LCD panel.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.133-139
• /
• 1995

In this paper, the frequency separation locking and interval stabilization of 4-channel DFB-LDs have been demonstrated using a fiber Fabry-Perot filter with an free spectral range of 100GHz. Frequency fluctuation and locking range of each channel were appeared to be within 15MHz and over 12GHz, respectively. Back-reflection curve from the fiber Fabry-Perot filter was used for the extraction of an error signal in order to increase the number of accomodable channels and extinction ratio.