• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.168-175
• /
• 2007

The flood caused landslide disaster each year because of climate change. And the change of topography from an earthquake makes topographical analysis impossible. This paper performed an investigation about a utilization methods and generation DEM(Digital Elevation Model) after digital aerial photographs quickly when the topographical change happens. Stereo imagery that was collected through digital aerial photographs made a generation of DEM possible. A standard deviation of generated DEM is 0.864m which is somewhat high but shows the real topography. As a result, it should be possible to generate DEM by using aerial photographs in case of the change of topography.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.261-264
• /
• 2011

유역의 유출현상은 유출에 직접적인 영향을 미치는 강수 등 수문학적 인자가 중요한 요인으로 작용하지만 유역의 지형학적 특성에 의해서도 유출에 미치는 영향은 매우 크다. 본 연구에서는 DEM의 해상도에 따라 유출, 유사, 증발에 어떠한 영향을 미치는지를 판단하는 것을 연구목적으로 하였다. 연구지역은 대전시를 관류하는 갑천유역(유역면적 약 $609km^2$)을 대상으로 하였으며, 사용한 DEM 자료는 30m 공간해상도는 갖는 WAMIS의 자료를 이용하였다. 이 30m의 공간해상도를 각각 60m, 90m, 120m, 150m로 각각 resampling, sink 제거 등의 과정을 거쳐 각 해상도별 DEM자료를 생성하였다. 유출 특성 분석을 위해 HyGIS-SWAT 모형을 이용하였다. 모형의 적용 결과 첨두유출은 30m해상도를 기준으로 150m해상도에서는 약 16%정도 감소하는 것으로 나타났으나, 총유출은 약 2%정도 감소하는 것으로 나타났고, 증발량의 경우에는 30m 해상도를 제외하고 대부분 비슷한 결과를 제시하고 있는 것으로 나타났다. 또한 그림 1에서 제시한 바와 같이 30m해 상도에서는 첨두유출은 크지만 저류부 유출은 오히려 150m해상도에서 더 많은 유출이 발생하는 것으로 분석되었다.

• Geomechanics and Engineering
• /
• v.24 no.1
• /
• pp.57-65
• /
• 2021

The effects of initial soil fabric and aspect ratio (AR) on the small-strain stiffness (G0) of granular soils are studied by employing discrete element method (DEM) numerical analysis. Elongated clumps composed of subspheres were adopted, and the G0 values were obtained by DEM simulations of drained triaxial tests under different densities and initial confining pressure (p0). The DEM simulations indicate that the initial soil fabric has an insignificant effect on G0. The effect of the AR on G0 is related to the initial density. Namely, for dense specimens, G0 first increases with increasing AR, reaching a plateau value when the AR ≥ 1.5. However, for loose specimens, G0 gradually increases as the AR increases. Microscopic examination reveals that G0 uniquely depends on the coordination number of the particles (CN-particle) rather than the subspheres (CN-sphere) at the particulate level for the effects of initial soil fabric and AR. Finally, Poisson's ratio ν0 is also determined by CN-particle. In addition, based on data in literature and this study, ν0 can be fitted as ν0 = 5.920(G0/(p0)1/3)-0.99, which can be used to predict ν0 of granular soils based on the measured G0.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.23-34
• /
• 1999

The most widely used measure for indicating the accuracy of DEM is RMSE(nut Mean Square Error), which is used by many national mapping agencies such as the USGS and the Ordnance Survey. Its prevalent use can be followed by the relative ease of calculation and understanding the concepts. However, there are many problems with the measure and the way from which it is often derived. First of all, the index does not involve my description of the mean donation between the two measures of elevation,. This means that it cannot interpret the distributions or patterns of errors involved in DEMs. The distribution of errors in DEMs will show some forms of spatial patterning. In order to explore the real quality of DEMs as a useful database, alternative approaches are needed. In this paper, we examined so called ESDA(Exploratory Spatial Data Analysis) approaches, which were attributed by both aspatial and spatial exploration methods. Our experimental research shows that even simple ESDA methods reveal new aspects of errors, especially spikes, striation, and terracing effect in DEMs, which my be ignored by RMSE measure.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.19-25
• /
• 2005

Nowadays, it is possible to construct the DEMs of urban area effectively and economically by LiDAR system. But the data from LiDAR system has form of DSM which is included various objects as trees and buildings. So the preprocess is necessary to extract the DEMs from LiDAR DSMs for particular purpose as effects analysis of man-made objects for flood prediction. As this study is for extracting DEM from LiDAR DSM of urban area, we detected the edges of various objects using edge detecting algorithm of image process. And, we tried mean value filtering, median value filtering and minimum value filtering or detected edges instead of interpolation method which is used in the previous study and could be modified the source data. it could minimize the modification of source data, and the extracting process of DEMs from DSMs could be simplified and automated.

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.391-398
• /
• 2018

The main purpose of this study is to suggest and recommend the more reliable flow direction methods within the framework of DEM and power law distribution, by investigating the existing methodologies. To this end SFD (single flow direction method), MFD (multiple flow direction method) and IFD (Infinite flow direction method) are applied to analyze the determination of a flow direction for the water particles as seen in the Jeonjeokbigyo basin, and then assessed with respect to the variation of flow accumulation in that region. As the main results revealed, the study showed the different patterns of flow accumulation are found out from each applications of flow direction methods utilized in this study. This brings us to understand that as the flow dispersion on DEM increases, in this case the contributing areas to the outlet grow in sequence of SFD, IFD, MFD, but it is noted that the contribution of individual pixels into outlet decreases at that time. In what follows, especially with the MFD and IFD, the result tends to make additional hydrologic abstraction from rainfall excess, as noted due to the flow dispersion within flow paths on DEM. Based on the parameter estimation for a power law distribution, which is frequently used for identify the aggregation structure of complex system, by maximum likelihood flow accumulation can be thought of as a scale invariance factor. In this regard, the combination of flow direction methods could give rise to the more realistic water flow on DEM, as revealed through the separate flow direction methods as utilized for dispersion and aggregation effects of water flow within the available different topographies.

• Journal of People, Plants, and Environment
• /
• v.24 no.1
• /
• pp.39-51
• /
• 2021

Background and objective: Urban topology can be characterized as impervious, which changes the hydrologic features of an area, increasing surface water flow during local heavy rain events. The pluvial flooding is also influenced by the vertical structures of the urban area. This study suggested a modified digital elevation model (DEM) to identify changes in urban hydrological conditions and segmentalized urban micro catchment areas using a geographical information system (GIS). Methods: This study suggests using a modified DEM creation process based on Rolling Ball Method concepts along with a GIS program. This method proposes adding realized urban vertical data to normal DEM data and simulating hydrological analyses based on RBM concepts. The most important aspect is the combination of the DEM with polygon data, which includes urban vertical data in three datasets: the contour polyline, the locations of buildings and roads, and the elevation point data from the DEM. DEM without vertical data (DCA) were compared with the DEM including vertical data (VCA) to analyze catchment areas in Shin-wol district, Seoul, Korea. Results: The DCA had 136 catchments, and the area of each catchment ranged from 3,406 m² to 423,449 m². The VCA had 2,963 catchments, with the area of each ranging from 50 m² to 16,209 m². The most important finding is that in the overlapped VCA; the boundary of areas directly affected by flooding and the direction of surface water flow could be identified. Flooding data from September 21, 2010 and July 27, 2011 in the Shin-wol district were applied as ground reference data. The finding is that in the overlapped VCA; the boundary of areas directly affected by flooding and the direction of surface water flow could be identified. Conclusion: The analysis of the area vulnerable to surface water flooding (SWF) was more accurately determined using the VCA than using the DCA.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.475-480
• /
• 2008

A pre/post processor program based GUI(Graphic User Interface) by using the MFC and OpenGL library in the Windows OS have been developed for the analysis of the passenger flow. Using this program, users are able to generate and modify the meshes of multi-storied subway station, set all the parameters for the solver, and obtain the results of the simulation such as transient passenger motions and passenger streak lines in 3-dimensional graphic view.

• Journal of Navigation and Port Research
• /
• v.31 no.7
• /
• pp.589-595
• /
• 2007

In the majority of previous studies on deformation of seabed structures using DEM, elements of structures have been assumed that it is composed with uniform materials or received fixed wave force, despite that actual submerged structures are composed with various size materials and influenced by complicated fluid field. The goal of this study is to develop a new model for analysis of seabed structure deformation using discontinuous structures composed with various size materials. As the first phase, a model using DEM and VOF, which can compute the deformation of submerged structures composed with various size materials, such as rubble mound structures, is proposed. A model test is carried out and then the validity of the model is discussed.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.367-373
• /
• 2010

When the numerical analysis is carried out, it is necessary to set proper elements as a feature of analysis domains for more accurate simulations. In this study, Distinct Element Method(DEM) is applied, only considering repulsive force and tensile force except for frictional force and resisting force of particle. When the filled particles with initial Quad-tree type is relocated by DEM, a blank space existing among the particles can be minimized because the shape of particle is circular. Finally, it is the effective feature that the centroidal disposion of the particles is similar to an equilateral triangle. Triangular mesh are formed by using the Delaunay triangular technique on these relocated particles, the quality of triangular mesh is more improved by carrying out Laplace interpolations. The compared result of Aspect Ratio before and after the Laplace interpolation is shown that although the quality of triangular mesh made by DEM is good, the later triangular mesh are higher quality than the formers. In this study, although the developed technique takes a longer calculational time than the previous technique to generate triangular mesh, it is considered that the applicable possibility is very high in the generation of finite element mesh about wave analysis and various numerical simulation to need a complex or reappearance of exact topography.