• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.59-67
• /
• 2005

This paper proposes method for determining exterior orientation parameters (EOPs) from the RPC mathematical camera model of the satellite image. SPOT satellite stereo pair is pre-tested using the proposed method. As results that, geopositioning errors are similar with those of the original EOPs. Differences between EOPs determined from the RPC and original EOPs were small. IKONOS Geo-level stereo pair is tested by the proposed method. Results of this method are compared with those of the RPC block adjustment method which have been verified in reported studies. Consequently, the proposed method showed accuracy similar to the RPC block adjustment method. The digital elevation models (DEMs) of sample area acquired by the two method almost did not have a difference.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.2
• /
• pp.11-23
• /
• 2000

The subjects of this study are to examine and to apply the methods of making 1 : 10,000 scale digital maps using Russian's 2 m resolution satellite images of Alternative and 8 m resolution stereo satellite images of MK-4 for the Kyoha area of Paju-city where aerial-photo surveying is not possible. A digital elevation model (DEM) was calculated from MK-4 images. With this DEM, the Alternative images were orthorectified. Ground control points (GCP) were acquired from GPS surveyings and were used to perform geometric corrections on Alternative images. From field investigation, thematic attributes are digitized on the monitor. RMS errors of the planar and vertical positions are estimated to ${\pm}0.4$ m and ${\pm}15$ m, respectively. The planar accuracy is better than an accuracy required by NGIS (national GIS) programs. Local information from field investigation was added and the resulting maps should be good as base maps for, such as, regional and urban plannings.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.111-116
• /
• 2008

The study installed non metric camera which was a 10 Mega Pixel camera in RC Helicopter. And the study controlled images hotographed in air on land, considering their overlap. The study could express DEM by abstracting TIN from the acquired images through image registration. Also, the study compared and examined accuracy between reference point and check point observed by Total Station which was a conventional type of survey. As the results, the study could get errors of $-0.194{\sim}0.224\;m$ on X axis, $-0.088{\sim}0.180\;m$ on Y axis and $-0.286{\sim}0.285\;m$ on Z axis. Expressing an error's RMSE in the checkpoint, the study could get of 0.021388 m on X axis, 0.015285 m on Y axis and 0.041872 m on Z axis. It is judged that the above photographing and analyzing technique are better than the existing Total Station to acquire more terrain elevation data.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.947-950
• /
• 1998

Geological structures such as fault and fracture patterns provide important information about preliminary exploration of mineralized areas and geological characterization. We apply a filtering method taking the sun's azimuth angle into account to a shaded relief image derived from a digital elevation model (DEM), by which even linear edges extending parallel to the sun direction can be effectively extracted. Then, Generalized Hough tranform is applied to extract lineanments which correspond to fault and fracture patterns.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.131-134
• /
• 2006

LiDAR(Light Detection And Ranging) 데이터 처리에 있어서 건물, 자동차, 수목 등의 비지면 객체와 지면을 분류하는 필터링 과정은 DEM(Digital Elevation Model) 구축을 위해서 중요하다. 도심지역의 건물추출 등의 필터링에 관한 연구는 활발히 진행되고 있으나 국내의 경우 수목에 대한 필터링은 비교적 연구가 미흡하였다. 따라서 이 연구에서는 기존에 다루어진 몇 가지 알고리즘을 분석하고 산림지역에 활용해 봄으로써 각 필터링에 관한 장단점을 비교하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.609-611
• /
• 1998

본 논문에서는 수치고도모델로부터 정확한 등고선을 추출하는 방법을 연구하였다. 이것은 하나의 높이 평면과 DEM 데이터의 교점 테스트를 통하여 등고선을 찾는 방법이다. 정해진 높이 평면과 교차하는 지형의 모든 점을 찾아내므로 등고선을 정확히 찾아낸다는 장점이 있다. 본 논문의 결과를 비교 분석함으로서 연구의 정확성을 도모하였다.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.18-21
• /
• 2001

컴퓨터 성능의 향상과 더불어 GIS의 발전 그리고 DEM(Digital Elevation Model)의 획득ㆍ사용이 가능하게 됨으로서 수문학(또는 생태학)에서의 분포형 모델은 1969년 Freeze와 Harlan이 처음으로 물리적인 기반의 분포형 모델을 소개한 이후로 그 발전을 거듭하고 있다. 국내에서는 1990년대 중반부터 GIS를 이용한 수문모델의 적용 및 개발에 대한 연구가 활발히 진행되고 있다.(중략)

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.99-105
• /
• 2007

This research is about applying aerial photos to three-dimensional simulation of road design. Instead of existing road design approach using digital map, which inexactly represent some part of topography and landmarks, digital aerial photos are applied to three-dimensional road design to address such inexactness of the map. First of all, ortho-photos are made using aerial photos, and a digital elevation model is created by extracting DEM. Then, by applying the coordinates practically using in planar design to three-dimensional approach, this model will be much helpful in the analyses of road route and viewscape. In addition, through the use of Virtual GIS, many evaluation factors such as urban design, flora, soil, water channel or road shape, flood plan are used for examination, and the effectiveness of applying three-dimensional simulation based on such route design standard is to be reviewed. In this paper, a basic research about three-dimensional design of structures is performed, and through the three-dimensional design, some effective determination to decision-making was carried out. Hereafter, it appears some research regarding environment-friendly construction and design should be followed.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.55-63
• /
• 2005

Direct Georeferencing(DG) Is based on the direct measurement of the projection centers and rotation angle of sensor through loading the GPS and INS in aircraft. The methods can offer us to acquire the exterior orientation parameters with only minimum GCPs, even the ground control process could be completely skipped. Hence, as long as securing Digital Elevation Model (DEM), it is feasible to generate digital orthophotos without performing the aerial triangulation with Ground Control Point (GCP) surveying. In this study, the DEM is automatically generated by using a image matching technique based on aerial photos and exterior orientation parameters. This is followed by producing an orthophoto from these results. Finally, accuracy analysis of the georeferencing technique for generating orthoimage indicates that RMS errors of 62cm and 76cm occurred at the X and the Y axis, respectively. This means that the results fulfill the demanding accuracy of the 1:5000 digital map. Hence, it is possible to conclude from this study that the direct georeferencing based orthoimage generation method is able to effectively digital map update.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.637-647
• /
• 1999

This study investigated the applicability of generalized TOPMODEL approach which introduces the power law of decreasing transimissivity with depth instead of the traditional exponential decreasing function. The 50m digital elevation model(DEM) of Dongkog subwatershed at Wichon Test Watershed was used to perform runoff simulation. Random number generation algorithm was integrated into the calibration process for the reliable of model performance. General power law version of TOPMODEL with exponent 2 and 3 showed higher simulation efficiency than other the approaches. This results from the fact that the power law models with exponent 2 and 3 can represent the soil characteristics of study area better than other models.