• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.161-178
• /
• 2006

Heathcote (1998) identified a systematic, seven-step approach to general watershed planning and management. It consists of 1) understanding watershed components and processes, 2) identifying and ranking problems to be solved, 3) setting clear and specific goals, 4) developing a list of management options, 5) eliminating infeasible options 6) testing the effectiveness of remaining feasible options, and 7) developing the final options. In this study the first five steps of that process were applied to the Anyangcheon watershed in Korea, which experiences streamflow depletion, frequent flood damages, and poor water quality typical of highly urbanized watersheds. This study employed four indices: Potential Flood Damage(PFD), Potential Streamflow Depletion(PSD), Potential Water Quality Deterioration(PWQD) and Watershed Evaluation Index(WEI) to identify and quantify problems within the watershed. WEI is the integration index of the others. Composite programming which is a method of multi-criteria decision making is applied for the calculation of PSD, PWQD and WEI (Step 2). The primary goal of the study is to secure instreamflow in the Anyangcheon during dry seasons. The second management goals of flood damage mitigation and water quality enhancement are also set (Step 3). Management options include not only structural measures that can alter the existing conditions, but also nonstructural measures that rely on changes in human behavior or management practices (Step 4). Certain management options which are not technically, economically, and environmentally feasible, are eliminated (Step S). Therefore, this study addresses a Pre-feasibility study, which established a master plan using Steps 1 through 5.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.649-658
• /
• 2009

The recent emergence of the paradigm of new urban planning for building intelligent urban spaces, such as U-City and U-Eco City, of which the concept of ubiquitous technology is applied, requires high quality three-dimensional spatial information of the urban area. The aim of this study is to build a multi-dimensional spatio-visual information system that includes the solution for visualization, spatial information search, analysis, and evaluation by integrating various types of 3D-modeled spatial information concerning the large urban-size area based on the latest GIS application technology. The range of this study is the integration, visualization, and utilization of spatial information with the goal of building 3D virtual urban environment of high-quality and high-resolution by increasing the utilization of the systematic urban facilities in order to fully reflect the actual user's needs, using the aerial LiDAR data as the plan to overcome the limitations of the existing 3D urban modeling. By reproducing the virtual urban environment the most similar to the actual world through the mash-up of satellite images and aerial photos on the standard format of spatial information constituted of properties and signs, the system will be built with many analysis and utilization functions that support the view and sunlight analysis, various administrative tasks, as well as the decision making process of the city.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.126-132
• /
• 2015

Technology forecasting is about understanding a status of a specific technology in the future, based on the current data of the technology. It is useful when planning technology management strategies. These days, it is common for countries, companies, and researchers to establish R&D directions and strategies by utilizing experts' opinions. However, this qualitative method of technology forecasting is costly and time consuming since it requires to collect a variety of opinions and analysis from many experts. In order to deal with these limitations, quantitative method of technology forecasting is being studied to secure objective forecast result and help R&D decision making process. This paper suggests a methodology of technology forecasting based on quantitative analysis. The methodology consists of data collection, principal component analysis, and technology forecasting by logistic regression, which is one of the data mining techniques. In this research, patent documents related to autonomous vehicle are collected. Then, the texts from patent documents are extracted by text mining technique to construct an appropriate form for analysis. After principal component analysis, logistic regression is performed by using principal component score. On the basis of this result, it is possible to analyze R&D development situation and technology forecasting.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.140-153
• /
• 2008

The recent stagnation of construction market draw more attention to construction technology development which is believed to be playing a important role in increasing the competitiveness of the construction industry. Thus, increasing pressures has been on the government playing a catalytic role of strengthen technology competitiveness. Hereupon, this study analyzed technology skill evaluation items of the Pre-Qualification system to facilitate construction technology development at the national level and tried to show the correlation between the PQ system and patent application through multilateral analysis of patent applications. Analysis results are intended to provide basic reference in decision-making process related to governmental regulation improvement especially on the PQ system. This research also attempted to draw implications to increase the use of technology related regulations such as patent & utility model based on PQ system analysis results. To do so, a comprehensive trend Analysis on the PQ system has been conducted from the view points of construction technology. Similar analysis has been done with the patent system & Utility model system. Based on Analysis result, implications of regulation improvements was outlined to promote construction technology development, due to eventually increase the competitiveness of Korean construction industry.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.3
• /
• pp.52-60
• /
• 2018

Korea's public construction projects are under construction through bidding, however, due to the nature of the bidding, collusion between participants can occur. The collusion of bids accordingly damages the client. So, it is necessary to calculate the appropriate fictitious competition price to compensate for this. In this regard, econometrics methods are generally used, but there are limitations and issues arising from the nature of construction, especially design-build bid. Therefore, this study proposes a method to estimate reasonable competitive bid-price in design-build bid. It derives the lowest bid-price from the design submitted by the proponent and estimates the competitive bid-price by examining the factors according to the penetration rate according to the technical level of the tester, the skill level of the competitor, and the type of tester. Based on the method proposed in this study, a reasonable price can be derived that reflects the characteristics of the design and construction bidding bidder selection method and also it can be used as a reference material in the actual bidding process as well as calculating the damage due to the answer.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.52-60
• /
• 2018

In the construction industry, attempts to evaluate the environmental impact of products through life cycle assessment (LCA) approach has been on the rise. However, the domestic construction industry needs to make rapid decisions due to limited budget and schedule, so it is difficult to carry out a review of the environmental load on all resources. The decision-making process requires information on the major influence factors that should be focused on to reduce environmental load. And this information should be quantified so that it can be linked to environmental impact assessment. In this study, the LCA results of road construction cases were analyzed to provide such information. As a result, diesel, ready-mixed concrete, urethane-based paint, aggregate, and asphalt concrete were found to be the main factors that generated 93.17% of the environmental load in the earthwork type of road project. The total environmental cost caused by these affecting factors when constructing 1 km of earthwork type of road project is 242 million won. The analysis also shows that a 10% reduction in the amount of ready-mixed and asphalt concretes can reduce carbon emissions by 5.02% and 2.28% while reducing environmental costs by 11 million won per kilometer. In order to reduce carbon emissions of the earthwork type of road project, it is necessary to actively develop and introduce new methods and eco-friendly materials to reduce the overall use of ready-mixed concrete and asphalt concrete.

• The KIPS Transactions:PartD
• /
• v.18D no.4
• /
• pp.261-274
• /
• 2011

In recent competitive business environment each enterprise has to be agile and flexible. For these purposes run-time monitoring ofservices provided by an enterprise and early decision making through this becomes core competition of the enterprise. In addition, in order to process various innumerable events which are generated on enterprise systems techniques which make filtering of meaningful data are needed. However, the existing study related with this is nothing but discovering of service faults by monitoring depending upon API of BPEL engine or middleware, or is nothing but processing of simple events based on low-level events. Accordingly, there would be limitations to provide useful business information. In this paper, through situation detection an extended complex event model is presented, which is possible to provide more valuable and useful business information. Concretely, first of all an event processing architecture in an enterprise system is proposed, and event meta-model which is suitable to the proposed architecture is going to be defined. Based on the defined meta-model, It is presented that syntax and semantics of constructs in our event processing language including various and progressive event operators, complex event pattern, key, etc. In addition, an event context mechanism is proposed to analyze more delicate events. Finally, through application studies application possibility of this study would be shown and merits of this event model would be present through comparison with other event model.

• Journal of Intelligence and Information Systems
• /
• v.14 no.1
• /
• pp.117-129
• /
• 2008

The cost-based scheduling work has been done in both the Operations Research (OR) and Artificial Intelligence (AI) literature. To deal with more realistic problems, AI-based heuristic scheduling approach with non-regular performance measures has been studied. However, there has been little research effort to develop a full inter-job cost propagation algorithm (CPA) for different jobs having multiple downstream and upstream activities. Without such a CPA, decision-making in scheduling heuristics relies upon local, incomplete cost information, resulting in poor schedule performance from the overall cost minimizing objective. For such a purpose, we need two types of CPAs : intra-job CPA and inter-job CPA. Whenever there is a change in cost information of an activity in a job in the process of scheduling, the intra-job CPA updates cost curves of other activities connected through temporal constraints within the same job. The inter-job CPA extends cost propagation into other jobs connected through precedence relationships. By utilizing the cost information provided by CPAs, we propose cost-based scheduling heuristics that attempt to minimize the total schedule cost. This paper develops inter-job CPAs that create and update cost curves of each activity in each search state, and propagate cost information throughout a whole network of temporal constraints. Also we propose various cost-based scheduling heuristics that attempt to minimize the total schedule cost by utilizing the cost propagation algorithm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.1
• /
• pp.1-10
• /
• 2011

This study was performed for the purpose of reviewing the strategic management direction and ideas of the policy for Seoul City's Hangang Renaissance. In order to accomplish this, levels were established for each step of the policy and the policy priority by level was derived. The policy priority by level was analyzed by a decision making model through the Analytic Network Process(ANP) and the priority would be the standard to judge the order of priority. The analysis results showed that there was not a big difference between the priorities of two basic concepts: restoration and creation. The fourth level, detail plan of the third level, showed priority that development by type for waterside city in case of reorganizing city space and diversification of land utilization, utilization of riverside space in water front town for public and composit purpose, establishment of comprehensive plan on constructions in case of improving the landscape of Hangang and unified design plan rose to important element in case of forming Hangang park with the me. Based on the results of priority analysis, we would like to propose for the direction about the policy on Hangang Renaissance project, the policies forming Hangang Park with theme through unified design plan and reorganizing city space have to be proceed preferentially and connected with other plans.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.153-163
• /
• 2016

Intellectual output, such as research papers and patents, has increased due to the consistent investment of the government R&D budget, however, the economical outcome leaves much to be desired. These unsatisfactory results originate from the lack of information sharing about the technology's business compatibility and enterprise's business capability between technology supplier and technology user. This study aims at investigating the decision making process of technology commercialization by proposing an assessment model of the technology's business compatibility and enterprise's business capability. The assessment model was completed by selecting the key index through a literature survey, field survey and consultation with experts. The technology assessment model can be effectively utilized for technology licensing, technology start-up and technology selection in R&BD projects. However, the assessment indexes required for the basic science are not investigated in this study and some assessment indexes are differently interpreted by the individual appraisers. The assessment model will be improved through field application and additional studies will be conducted to develop the assessment model of basic science.