• Journal of Embryo Transfer
• /
• v.26 no.3
• /
• pp.159-164
• /
• 2011

This study was performed in order to determine optimum flushing solution using the direct embryo collection (DEC). Donors, at random stages of the estrous cycle, received a CIDR. 7 days later, 200 mg FSH was treated with 40, 30, 20, 10 mg FSH levels in declining doses twice daily by intramuscular injection for 4 days. On the 3$^{rd}$ day administration of FSH, 25 mg $PGF_2{\alpha}$ was administered and CIDR was withdrawn. After FSH injections were complete, donors were artificially inseminated twice at 12 hr intervals. The donor cattle received 250 ${\mu}g$ GnRH at time of 1$^{st}$ insemination and embryos were recovered 8 days after the 1$^{st}$ insemination. Embryo collection from superovulated donors were performed to flushing by DEC and conventional method. As a results, the average number of recovered embryos were significantly higher as 19.1${\pm}$1.40 with DEC method than 12.0${\pm}$0.44 with conventional embryo collection method, respectively (p<0.05). Also, The average number of transferable embryos were significantly higher (p<0.05) as 15.8${\pm}$1.72 with DEC method than 6.9${\pm}$0.35 from conventional embryo recovery procedures. Meanwhile, number of recovered embryos and number of recovered transferable embryos following the number of flushing times until 6${dr}$ flushing were significantly higher as 8.6${\pm}$0.53 and 8.6${\pm}$0.53 from 2$^{nd}$ flushing time than other groups (p<0.05). No. of Ear. B stage embryos were significantly higher as 3.9${\pm}$0.90 and 3.9${\pm}$0.90 with 2$^{nd}$ flushing time in total collected embryos and transferable embryos (p<0.05). Com M stage embryos were significantly higher as 3.7${\pm}$1.00 in 2$^{nd}$ flushing time and as 2.2${\pm}$0.76 in 3$^{rd}$ flushing time for recovered embryos (p<0.05). In transferable embryos, Com. M stage embryos were significantly higher (p<0.05) as 3.7${\pm}$1.00 in 2$^{nd}$ flushing time and as 2.2${\pm}$0.76 in 34$^{dr}$ flushing time, also. No. of degradation embryos was significantly higher as 2.2${\pm}$0.72 in 5${rd}$ flushing time, On the other hand, degradation embryos was not observed in transferable embryos (p<0.05). In conclusion, these results suggest that DEC method should effective methods for production of in vivo embryos using less flushing solution following perform until 4$^{rd}$ flushing time than conventional embryo collecting method. Also, it might be effectively collection of transferable embryos following more less procedure times compared to conventional embryo recovery methods.

• Korean Journal of Microbiology
• /
• v.52 no.2
• /
• pp.212-219
• /
• 2016

Forty-nine pigments were extracted from the collections of 106 pigment producing bacteria from the plant rhizosphere soil. Antibacterial activity test was performed in the subjects of the extracted pigments with plant pathogenic bacteria including Xanthomonas axonopodis and Xanthomonas campestris, and with plant pathogenic fungi including Botrytis cinerea, Colletotrichum acutatum, and Fusarium oxysporum. The yellow pigment by Chryseobacterium sp. RBR9 and the red pigment by of Methylobacterium sp. RI13 showed the antibacterial activities against Xanthomonas axonopodis and Xanthomonas campestris. The violet pigment by Collimonas sp. DEC-B5 showed the antibacterial activity as well as the antifungal activities against Botrytis cinerea and Fusarium oxysporum. Especially, the violet pigment inhibited the growth of Botrytis cinerea more than 65% at MIC $20{\mu}M$. Upon the HPLC analysis result for the isolation of pigment with antifungal activity, violacein (91.6%) and deoxyviolacein (8.4%) were isolated for the pigment by Collimonas sp. DEC-B5. The production amount of the pigment was increased more than 10 times higher when D-mannitol 1.5% and yeast extract 0.2% were added as the nitrogen source to SCB medium. This study suggests that produced violacein by Collimonas sp. DEC-B5 will be effective to control strawberry gray-mold rot fungi by its preventive activity.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.446-457
• /
• 2008

Three kinds of hydroxypropyl cellulose (HPC) derivatives: 6- (cholesteryloxycarbonyl) pentoxypropyl celluloses(CHPCs) with degree of esterification(DE) ranging from 0.6 to 3, 6-[4-{4'-(nitrophenylazo)phenoxycarbonyl}] pentoxypropyl celluloses (NHPCs) with DE ranging from 0.4 to 3, and fully 6-(cholesteryloxycarbonyl) pentanoated NHPCs (CNHPCs) were synthesized, and their thermotropic liquid crystalline properties were investigated. All the CHPCs and NHPCs with $DE{\leq}1.7$ formed enantiotropic cholesteric phases, whereas CNHPCs with 6-(cholesteryloxycarbonyl) pentanoyl DE(DEC) more than 1.6 exhibited monotropic cholesteric phases. On the other hand, NHPCs with $DE{\geq}2.4$ and CNHPCs with $DEC{\leq}1.3$ showed monotropic nematic phases. NHPCs with $DE{\leq}l$, as well as HPC, formed right-handed helices whose optical pitches (${{\lambda}_m}'s$) increase with temperature, while all the CHPCs formed left-handed helices whose ${{\lambda}_m}'s$ decrease with temperature. In contrast with these derivatives, NHPCs with $1.4{\leq}DE{\leq}1.7$ and CNHPCs with $DEC{\geq}1.6$ did not display reflection colors over the full cholesteric range, suggesting that the helical twisting power of the cellulose chain and the cholesteryl group highly depends on the chemical structure and DE of mesogenic group.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.4
• /
• pp.306-312
• /
• 2006

Two culture modes, continuous and semi-continuous, of the decolorization fungus, Geotrichum candidum Dec 1, were compared to obtain a high treatment efficiency of molasses decolorization and a large productivity of peroxidase (DyP) to simultaneously decolorize dyes and molasses. The continuous culture of G. candidum Dec 1 using a 5-I jar-fermentor showed high DyP activity at a low dilution ratio of $0.005h^{-1}$, and decolorization ratio of molasses of 80% was obtained concomitantly. Therefore, a semi-continuous culture was performed by repeated refill and draw. In this mode, approximately 1.5 liters of the culture broth was replaced per cycle when the decolorization ratio of molasses was near 80%. The molasses medium (1.0 liter per day) was treated and the peroxidase productiveity in the drawn culture broth was 26.6U/day, whereas the peroxidase productiveity was 17.9U/day in the continuous culture with a dilution rate of $0.005h^{-1}$. The semi-continuous treatment system was an efficient decolorization method for the strain, G. candidum Dec 1.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.412-415
• /
• 2017

In this study, the decomposition performance of ammonia dinitramide (ADN) based liquid monopropellant was evaluated by using metal supported alumina bead catalyst. Alumina bead was calcined at $1200^{\circ}C$, and Pt and Cu were impregnated on alumina bead by excess water impregnation using a rotary evaporator. The decomposition temperature ($T_{dec}$) of ADN-based liquid monopropellant was measured in a home-made batch reactor. The decomposition temperature of Cu/$Al_2O_3$ catalyst was lower than that of Pt/$Al_2O_3$ catalyst, and $T_{dec}$ was about $130^{\circ}C$.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.866-872
• /
• 2024

Design Extension Conditions (DEC)-A assessments of the operating nuclear power plants are generally considered for the purpose of getting additional safety demonstrations of their capability to undergo conditions that are generally more severe than DBAs by features implemented in the design and accident management measures. The pursued methodology is generally based upon Best Estimate approaches aiming at verifying that the safety limits in terms of integrity of the barriers against eventual large or early releases of radioactive material are fulfilled. These aspects are nowadays being experimentally and analytically addressed within the OECD/NEA experimental projects like the ATLAS and PKL series where a set of DEC-A experiments are considered. In this paper, experiments related to SBLOCA at the vessel upper head of the pressurized vessel of ATLAS and PKL are analytically assessed using the CATHARE code. These experiments includes issues related to common cause failure of the safety injection system and operator actions for preventing core excessive overheating. It is shown that, on the one hand, the safety features embedded in the design together with the operator actions are capable to prevent the progression towards a severe accident state and on the other hand, the code prediction capabilities for such scenario are generally good but still to be enhanced.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.46-54
• /
• 2014

Direct shear tests have been initiated to understand the characteristics of joints which crucially affect the stability of rock mass. In this research, numerical approach in direct shear tests has been initiated using 3DEC on the basis of 3D distinct element method. Normal loads were altered in four different levels on artificial joint tests depending on the sawtooth angle and strengths on constant normal stress conditions, measuring the peak shear strength according to the direct shear tests under laboratory condition. Also results obtained from mechanical properties through laboratory test were used to perform numerical modeling, and shear strength obtained from the modeling was used to compare with laboratory direct shear test. As a result numerical analysis from distinct element method can simulate well on the shear behavior of rockmass.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.57-58
• /
• 2000

Production of dye-decolorizing enzyme was investigated with the cultivation of Geotrichum candidum Dec1 (abbreviated to Dec1) using molasses as a cheap raw materials. Molasses was found to stimulate the enzyme production as well as a role of carbon source, because the production increased with molasses content up to 50 g/L. However, the severe inhibition of dye-decolorizing enzyme activity was observed even at low concentration of molasses 10 g/L when purified decolorizing peroxidase was used. Its inhibitory effect was reduced through the cultivation of Dec1. The fractions of molasses separated by a gel chromatography showed the different degrees of inhibition. As a way to reduce the inhibitory effect, the dilution of culture broth was examined, and the total decolorizing activity for Reactive blue 5 increased 7 times as much as that of original culture broth by 30 times dilution. On the basis of result, we proposed a process scheme which can fully utilize both positive and negative effect of molasses in dye-decolorizing process using molasses.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.7
• /
• pp.80-86
• /
• 2015

As wind farm outputs depend on natural wind resources that vary over space and time, spatial correlation analysis is needed to estimate power outputs of wind generation resources. As a result, geographic information such as latitude and longitude plays a key role to estimate power outputs of spatially distributed wind farms. In this paper, we introduce spatial correlation analysis to estimate the power outputs produced by wind farms that are geographically distributed. We present spatial correlation analysis of empirical power output data for the JEJU Island and ERCOT ISO (Texas) wind farms and propose the Correlation Decay Distance (CoDecDist) model based on geographic correlation analysis to enhance the estimation of wind power outputs.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.44-55
• /
• 1994

This study is to apply the theory of fatigue fracture to solder joints under thermal cyclic loading and predict life of solder joint to failure. A 62Sn-36Pb-2Ag solder was used in this study. Tensile tests were preformed at temperatures of 15.dec. C, 50.dec. C and 85.dec. C in order to find terms of crack length "a". plastic strain range ""${\Delta}{\varepsilon}_p$" and temperature "T". Solder joint under thermal cyclic loading was analyzed by FEM. this FEM analysis together with the crack growth rate will provide the capability of the fatigue life prediction of solder joints and enhance the reliability od solder joint.