• 제목/요약/키워드: DEC

검색결과 1,482건 처리시간 0.027초

고압수 접촉상태가 수압파쇄에 미치는 영향 (The Effects of High Pressure Water Contact State on Hydraulic Fracturing)

  • 이상훈;임종세;장원일
    • 터널과지하공간
    • /
    • 제26권5호
    • /
    • pp.409-417
    • /
    • 2016
  • 본 전통석유자원을 대체할 수 있는 석유자원으로 부상하고 있는 셰일가스가 부존된 셰일층은 낮은 투과성을 가지고 있어 생산성을 향상시키기 위해 수압파쇄법이 적용된다. 본 연구는 일반 시추공과 나선형 홈을 가지는 시추공을 모사한 축소 모형 시험체에 대해 실내수압파쇄 시험을 실행하고 초기파쇄압과 유체접촉상태를 비교 분석하여 공벽형상에 따른 수압파쇄결과를 알아보았다. 또 그 결과를 3차원 개별요소 프로그램인 3DEC을 이용한 수치해석 모델링 값과 비교하였으며, 선행연구 자료와 비교하여 신뢰성 있는 결과를 도출하고자 하였다. 실험결과 고압수의 접촉면적보다는 유도홈의 형태에 의한 응력집중의 효과가 수압파쇄에 더욱 효율적이였다. 따라서 고압수의 응력집중을 높일 수 있는 인공적인 유도홈을 만들 시 적은 수압으로 큰 파쇄효과를 나타낼 수 있을것으로 생각된다.

저장탄수화물과 질소의 월동성과 재생활력에 대한 이용성 III. 추파 유채 ( Brassica napus L. ) 의 예취기시가 월동중 저장유기물 함량 및 수량에 미치는 영향 (( Partitioning of Carbon and Nitrogen Reserves During Winter Adaptation and Spring Regrowth III. Effect of cutting date on the content of organic reserves on the wintering period and forage yeild in rape( Brassica napus L. ))

  • 김태환;김기원;정우진;전해열;김병호
    • 한국초지조사료학회지
    • /
    • 제15권4호
    • /
    • pp.238-244
    • /
    • 1995
  • The objective of this study is to obtain the basic data for investigating the effects of organic reserves on winter survial or regrowth yield. Forage rape(Brassica napus L.) was sown on Sep. 1, 1994. Experimental plots were divided into three replicates under 6 different cutting dates(l0 days interval from Oct. 15 to Dec. 4). Field-grown palnts were sampled on the each cutting date and on the wintering period (Jan. 16) to analyze the nitrogen and non-structural cahohydrate reserves. The rate of winter survival and regrowth yield were also measured in the spring of next year. On the before wintering, dry matter yields were 152, 274, 500, 718, 776 and 981 kg/lOa, respectively, from the cutting date on Oct. 15, Oct. 25, Nov. 4, Nov. 14, Nov. 24, and Dec. 4. Cmde protein yield significantly increased as cutting date was later until Nov. 14, thereafter a significant increase did not occured. Nitrogen and starch contents per plant significnatly increased as the cutting date was later. The increasing rate of starch was greatly higher than that of nitrogen. On the wintering period, nitrogen reserves in mts were 85.3, 68.8, 47.6, 28.3, 44.3, and 55.3 mglplant, and starch reserve were 11 1.3, 75.3, 39.3, 19.6, 26.4 and 34.6 mglplant, respectively, in the plots cut on Oct. 15, Oct. 25, Nov. 4, Nov. 14, Nov. 24, and Dec. 4. It showed that carbohydrate reserves were much highly utilized than nitrogen reserves during wintering period. The rates of winter survival were 91, 83, 46, 22, 35 and 43% and regrowth yields were 692, 545, 316, 84, 127 and 140 kgD.M/lOa, respectively, in each plots. The highly significant correlation (p<0.01) between the level of organic reserves and the rate of winter survival or regrowth yield were obtained.

  • PDF

1965년(年)에 실시(實施)한 Diethylcarbamazine의 말레이사상충(絲狀蟲)에 대한 구충효과(驅蟲效果)의 평가(評價) (Effect of Diethylcarbamazine against Brugia malayi Infection on Cheju Island, evaluated in 1965)

  • 백영한
    • Parasites, Hosts and Diseases
    • /
    • 제24권2호
    • /
    • pp.201-204
    • /
    • 1986
  • A study on the effect of diethylcarbamazine (DEC) (Supatonin) against Brugia malayi infection was conducted on Cheju Island in September 1965. A total of 182 persons living in a village of Aiwol Myun, Bukcheju-Gun was examined for microfilaraemia. Microscopic examination of smears of $20{\mu}l$ of blood revealed a microfilaria positivity rate of 28.5%. At the end of September 1965, 34 confirmed microfilaria positive cases were treated with DEC at a daily dosage of 5mg/kg body weight. A full course of 12 days of drug administration divided of two rounds for 6 days each was used. The first round of treatment was given under a strict supervision of the author in order to observe carefully side-effects of the drug. The second round of treatment was given in January 1966. The microfilaria density in $20{\mu}l$ of blood of those who received the drug was checked four times; before the treatment, during the first round of the treatment, 2 weeks and 4 months after the completion of the first round. The pre-treatment mean microfilaria density of 104.6 diminished to nearly zero (only two cases with one microfilaria respectively) 2 weeks after the first round and again slightly rose up to 0.5 four months after the first round. These results indicate that DEC (Supatonin) is highly effective to eliminate the microfilaria of B. malayi. However, severe side-effects, e.g. fever (average $38.6^{\circ}C$, maximum $39.7^{\circ}C$), headache, backache and seldom abdominal discomfort etc. were observed. There were two cases of withdrawal from the scheme due to refusal.

  • PDF

EFFECT OF WINTER SUPPLEMENTATION ON THE PERFORMANCE OF BALOCHI EWES GRAZING NATIVE RANGELANDS IN HIGHLAND BALOCHISTAN

  • Rafique, S.;Munir, M.;Sultani, M.I.;Rehman, A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제4권4호
    • /
    • pp.333-339
    • /
    • 1991
  • Eighty-two ewes of Balochi breed, two to four years of age were used in a completely randomized design to study the effect of winter supplementation on their performance in Kalat area of Balochistan and randomly divided into two groups of 40 and 42 animals. Two treatments (T1 and T2) studied were : 250 gm/animal/day of a 50 : 50 mixture of cottonseed cake and barley grain fed from Oct. 20 to Dec. 18, 1988 plus grazing and 500 gm/animal/day of the same feed mixture fed from Oct. 9 to Dec. 18, 1988 in addition to grazing. Lucerne hay and wheat straw in a 50 : 50 ratio were provided to all the ewes for a period of one month from Jan. 6, 1989 @ 320 gm/animal/day to sustain them in severe winter. Same feeding levels to the same ewe groups were again fed from Mar. 1 to May 27, 1989. Three breeding rams stayed with the flock from Nov. 1 to Dec. 13, 1988. Lambing took place from Apr. 2 to May 12, 1989. Conception, lambing and mortality percentage was found different (P<.05) between T1 and T2 (12.5 vs 14.8 kg). The ewes on T2 maintained higher body weights throughout winter than the ewes on T1. The results are suggestive of improvement in conception rate with winter supplementation (flushing) and decrease in ewe mortality. Late-gestation and early-lactation supplemental feeding of ewes results in increases in weaning weights of their lambs.

DFN 모델과 스미어드 균열 모델을 이용한 불연속 암반의 3차원 수리해석 (Hydraulic Analysis of a Discontinuous Rock Mass Using Smeared Fracture Model and DFN Model)

  • 박정찬;김진섭;이창수;권상기
    • 터널과지하공간
    • /
    • 제29권5호
    • /
    • pp.318-331
    • /
    • 2019
  • 본 연구에서는 3차원 불연속균열망을 이용하여 불연속 암반을 모사하여 스미어드 균열 모델을 적용한 불연속 암반의 등가연속체 해석기법에 대해 연구를 실시했다. 연속체 해석 코드인 FLAC3D를 이용하여 모델링을 수행하였고, 해당 적용 모델의 신뢰성을 검증하기 위해 불연속체 해석에 널리 사용되는 3DEC 코드를 통해 모델의 메쉬 사이즈, 불연속면의 밀도 및 불연속면의 간극에 대한 민감도 분석을 함께 실시하여 제안 모델의 신뢰성을 검증할 수 있었다. 본 논문에서 제안된 등가연속체 해석기법을 이용한 불연속 암반의 수리해석에 대한 연구결과는 교통 터널, 석유비축기지, 방사성폐기물 처분장 등의 지하 구조물 설계 및 건설 분야에 기초자료로 활용될 것이라고 판단된다.

Synergistically Enhanced Oxygen Evolution Catalysis with Surface Modified Halloysite Nanotube

  • Hyeongwon Jeong;Bharat Sharma;Jae-ha Myung
    • Journal of Electrochemical Science and Technology
    • /
    • 제14권1호
    • /
    • pp.96-104
    • /
    • 2023
  • Synergistically increased oxygen evolution reaction (OER) of manganese oxide (MnO2) catalyst is introduced with surface-modified halloysite nanotube (Fe3O4-HNTs) structure. The flake shaped MnO2 catalyst is attached on the nanotube template (Fe3O4-HNTs) by series of wet chemical and hydrothermal method. The strong interaction between MnO2 and Fe3O4-HNTs maximized active surface area and inter-connectivity for festinate charge transfer reaction for OER. The synergistical effect between Fe3O4 layer and MnO2 catalyst enhance the Mn3+/Mn4+ ratio by partial replacement of Mn ions with Fe. The relatively increased Mn3+/Mn4+ ratio on MnO2@FHNTs induced 𝜎* orbital (eg) occupation close to single electron, improving the OER performances. The MnO2@FHNTs catalyst exhibited the reduced overpotential of 0.42 V (E vs. RHE) at 10 mA/cm2 and Tafel slope of (99 mV/dec), compared with that of MnO2 with unmodified HNTs (0.65 V, 219 mV/dec) and pristine MnO2 (0.53 V, 205 mV/dec). The present study provides simple and innovative method to fabricate nano fiberized OER catalyst for a broad application of energy conversion and storage systems.

공모선(工母船) 개척호(開拓號)의 운용(運用)에 관한 실태(實態) 분석(分析) (The Actual Conditions of the Management of the Factory Ship GAECHEOG)

  • 정동희;김진건
    • 수산해양교육연구
    • /
    • 제9권2호
    • /
    • pp.149-166
    • /
    • 1997
  • This thesis is studied by means of operation diary of the factory ship GAECHEOG in the Sea of Okhotsk and the Sea of Bering from Jul. 1993 to Dec. 1996, We summarize these results as follows : 1. The factory ship GAECHEOG equipped trawl winch able to haul raw fish 700M/T per day and cargo winch able to unload manufactured goods 900M/T. The crews consist of 290~330 persons. 2. Factory machineries equipped surimi making plant able to process about 150M/T per day and fish meal plant able to manufacture about 70M/T per day. 3. The fishing ground from June to Nov. was the western Bering sea lying in the eastern Kamchaka peninsula and from Dec. to May, the fishing period to gather roe of a Pollack, was the Sea of Ohotsk lying in the western Kamchaka peninsula. 4. The buying catch of fish per each voyage from Dec. to May, the fishing period gathering Pollack-roe, was about 17,000~33,000M/T and from Jul. to Oct., the fishing period gathering non Pollack-roe, was about 10,000~21,000 M/T. 5. Raw fish was the most about 33,000M/T of the 2nd voyage in 1994 and was the least about 8,300M/T of the 1st voyage in 1993. Other voyages were about 13,000~18,000M/T. 6. The Pollack buying from Jul. to Nov. in the Bering sea was 5~7 fishes for one row in pan and body length about 40~50cm, and from Dec. to May in the Sea of Ohotsk was 6~8 fishes for one row in pan and body length about 37~45cm. 7. Surimi production in the 2nd voyage in 1994 was the most about 7,300 M/T, in the 1st voyage in 1993 was the least 1,900M/T and in other voyages was about 2,500~3,800M/T. The extraction rate of surimi goods for raw fish was about 17.4~26.5%. 8. Fish meal production in the 2nd voyage in 1994 was the most about 2,300 M/T, in the 1st voyage in 1993 was the least about 780M/T and in other voyages was about 1,100~1,700M/T. The extraction rate of fish meal goods for raw fish was about 7.3~10.7%. 9. Pollack-roe production was very much from Jan. to Apr. and was about 380~700M/T per each voyage. The extraction rate of Pollack-roe for raw fish was about 1.2~4.9%.

  • PDF

PC 비율에 따른 $LiPF_6/PC+EC+DEC$ 전해액의 물리적 특성 및 탄소분극과의 초기 전기화학적 특성 (Physical Properties of $LiPF_6/PC+EC+DEC$ Electrolyte by the Variation of PC Fraction and Initial Electrochemical Properties of Carbon Anode in the Electrolyte)

  • 도칠훈;문성인;윤문수
    • 전기화학회지
    • /
    • 제3권4호
    • /
    • pp.224-231
    • /
    • 2000
  • 흑연재료를 부극으로 사용하는 리튬2차전지의 유기 전해액으로 propylene carbonate(PC) 용매를 사용하면 흑연층간에 PC의 비가역적 삽입반응으로 인하여 흑연의 exfoliation이 진행된다. 유기전해액으로 ethylene carbonate(EC)를 사용하면 이러한 문제점은 해결되지만, EC의 어는점이 $36.2^{\circ}C$로 높은 것이 단점이다. EC계 전해액에 적정 비율의 PC를 첨가한 혼합 유기 전해액은 전도도가 향상 될 수 있으며, 흑연전극의 exfoliation도 감소시킬 수 있다. EC계 전해액에 첨가한 PC 함량에 따른 유전상수 및 몰전도도를 구하였으며, 동시에 탄소부극에 대한 전기화학적 특성을 조사하였다. $LiPF_6/EC+DEC$ 전해액에 첨가한 PC 함량이 증가하면 유전상수와 몰전도도는 직선적으로 증가하였다. 충방전 시험결과, MCMB-6-28s및 MPCF300의 비가역비용량은 첨가한 PC함량이 $0.83\%$인 경우에는 감소하였으나, 그 이후에는 PC함량에 따라 증가하였다 MPCF3000및 PCG100의 비가역비용량은 PC함량이 $10\%$까지는 50mAh/g이하였다. 그러나, 방전비용량은 첨가한 PC 함량과 관계없이 사용한 탄소재료에 따라서 일정한 값을 나타내었다.

상온제련을 위한 네오디뮴의 비수계 전해 기초연구 (A Basic Study on Non-aqueous Electrolysis of Neodymium for Room-temperature Metallurgy)

  • 박제식;이철경
    • 자원리싸이클링
    • /
    • 제27권4호
    • /
    • pp.29-35
    • /
    • 2018
  • 본 연구에서는 네오디뮴의 상온제련의 가능성을 알아보기 위하여 비수계 전해액에서 네오디뮴의 전기화학적 레독스 거동을 조사하였다. 비수계 전해질로는 이온성액체인 $[C_4mim]PF_6$, $[C_4mim]Cl$, $[P_{66614}]PF_6$와 함께 네오디뮴 염에 대한 용해도가 높은 에탄올과 전기화학적 안정성이 높은 탄산염계 유기용액을 기반으로 한 혼합전해질을 대상으로 하였다. 다른 전해액에 비하여 ethylene carbonate(EC)/di-ethylene carbonate (DEC)의 경우가 네오디뮴의 전기화학적 레독스 특성이 우수한 것으로 판단되었으며, 물성향상을 위하여 에탄올을 첨가하는 실험을 수행하였다. 순수한 1 : 1 EC/DEC와 에탄올의 혼합 비율, 그리고 $NdCl_3$의 농도에 따른 이온전도도를 측정한 결과, 에탄올 함량 50 vol%, $NdCl_3$ 농도 0.5 M에서 전해질 특성이 가장 우수한 것으로 판단된다. 순환전위법과 선형전위법을 이용해 -3.8 V (vs. Pt-QRE)에서 네오디뮴의 환원반응으로 추정되는 전류피크가 관찰된다. 상온에서 -6 V (vs. Pt-QRE)에서 18시간 동안 정전압법으로 전해한 결과, 금속 네오디뮴이 전착되었음을 확인하였다.

Assessment of three European fuel performance codes against the SUPERFACT-1 fast reactor irradiation experiment

  • Luzzi, L.;Barani, T.;Boer, B.;Cognini, L.;Nevo, A. Del;Lainet, M.;Lemehov, S.;Magni, A.;Marelle, V.;Michel, B.;Pizzocri, D.;Schubert, A.;Uffelen, P. Van;Bertolus, M.
    • Nuclear Engineering and Technology
    • /
    • 제53권10호
    • /
    • pp.3367-3378
    • /
    • 2021
  • The design phase and safety assessment of Generation IV liquid metal-cooled fast reactors calls for the improvement of fuel pin performance codes, in particular the enhancement of their predictive capabilities towards uranium-plutonium mixed oxide fuels and stainless-steel cladding under irradiation in fast reactor environments. To this end, the current capabilities of fuel performance codes must be critically assessed against experimental data from available irradiation experiments. This work is devoted to the assessment of three European fuel performance codes, namely GERMINAL, MACROS and TRANSURANUS, against the irradiation of two fuel pins selected from the SUPERFACT-1 experimental campaign. The pins are characterized by a low enrichment (~ 2 wt.%) of minor actinides (neptunium and americium) in the fuel, and by plutonium content and cladding material in line with design choices envisaged for liquid metal-cooled Generation IV reactor fuels. The predictions of the codes are compared to several experimental measurements, allowing the identification of the current code capabilities in predicting fuel restructuring, cladding deformation, redistribution of actinides and volatile fission products. The integral assessment against experimental data is complemented by a code-to-code benchmark focused on the evolution of quantities of engineering interest over time. The benchmark analysis points out the differences in the code predictions of fuel central temperature, fuel-cladding gap width, cladding outer radius, pin internal pressure and fission gas release and suggests potential modelling development paths towards an improved description of the fuel pin behaviour in fast reactor irradiation conditions.