• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.145-160
• /
• 2018

Long subsea tunnel is subject to many restrictions in terms of spatial limitation when vertical or inclined shafts are built for tunnel ventilation. So, the construction of some artificial island is required to provide ventilation. But, because of construction difficulty and cost increase, it is necessary to minimize the artificial island construction. As a result, ventilation distance become longer and supply airflow becomes excessive due to air leakage, So, duct mounting for temporary ventilation is impossible or fan pressure and power increase exponentially. Therefore, in order to build a long subsea tunnel, it is necessary to overcome these practical problems and to develop technical solution that can keep the comfortable condition of tunnel environment during construction. In previous study, we have found that air leakage is the key factor in solving these problems and experimental results show that the new connection method has a leakage rate of about $1.46mm^2/m^2$ (Jo et al., 2017). In this study, we present the experimental results of the measurement of the leakage rate of the prototype with the new connection method, and analyze experimentally the improvement of the leakage rate when applying the flexible cover inside the duct to improve the leakage performance of the existing connection method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.232-233
• /
• 2017

In this research, tunnel stern was applied on the asymmetric high-speed catamaran to evaluate vessel's hydrodynamic performance by numerical method, and the tunnel stern types are distinguished by angle of inclination of tunnel exit region into 3cases ($0^{\circ}$, $3^{\circ}$ and $6^{\circ}$). Consequently, it is confirmed that the total resistances of tunnel stern which have $0^{\circ}$ of inclination are lower about 4.8-17.9% than the bare hull in the wide speed range, but those of $3^{\circ}$ and $6^{\circ}$ of inclination tunnel stern are higher than bare hull about 5-14% and 5-29%, respectively. On the other hand, trim angles of $0^{\circ}$ of inclination tunnel stern show similar trend with those of bare hull in whole ranges of FnV but those of $3^{\circ}$ and $6^{\circ}$ of inclination tunnel stern are stabilized and declined respectively after FnV=1.54. These phenomena indicated that increasing angle of inclination of tunnel exit region had negative influence on resistance performance, however, it could make vessel's operation performance better than bare hull.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.185-192
• /
• 2011

The purpose of this paper is to propose the design and implementation of a korean style internet-based test system on the basis of efficiency and stability for middle server. The current assessment system has some unstable elements with regard to transmission procedure, cost, system load and stability. This paper proposes a series of activities for the performance improvement of korean style internet-based test system which finally produced various excellent results in the administration of expense control, human resources, and special operational affairs. The proposed system's technological factors using middle server have been tested through a basic simulation pilot system. Actual development procedure starts from the analysis required by improving the shortcomings of existing internet-based test systems. A efficiency comparison with existing system and newly developed system was made in the area of number of operators, abnormal processing, system maintenances. Korean style internet-based test system using middle server has shown great efficiency increased to the maximum of 2 times about the effectiveness of processing for various parts. The korean style internet-based test system using middle server have been given good evaluations with regard to the convenience of their use and the management system for operators and supervisors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.147-151
• /
• 2005

Retort pouch is widely used in food industry for a long-term preservation and safe food production. By applying retort pouch technique to waxycorn storage, the quality of waxycorn could be maintained and the storage expense could be saved during storage. Water activities(Aw) of retort waxycorn were below 0.80 except blanching treatment, and it is known that microbial propagation is subdued below 0.80. Commercial value of waxy corn was deteriorated when it was frozen quickly at $-40^{\circ}C$ before treating Retort due to obscurity of chromatocity, while the color change was not noticeable when it was treated with Retort at $121^{\circ}C$ for 10min. For all treatments, very small amounts of free sugar were detected, however, there were no significant differences between treatments. As storage period was longer, shelf lifes of waxy corn in control and waxy corn treated with blanching were more shortened when waxy corn was stored at $15,5^{\circ}C$ before Retort, while waxy corn with boiling treatment was not significantly different compared with that in storage in freezer.

• Food Science of Animal Resources
• /
• v.25 no.4
• /
• pp.383-390
• /
• 2005

To evaluate the sensory characteristics of domestic or imported chilled and frozen bellies, twelve samples were purchased and tested Sixty panels of sensory evaluation were consisted of six groups by sex and age. Frozen bellies were no difference in flavor, taste and tenderness. However, many panels favor the juiciness and acceptability of imported ones significantly compared to those of domestic ones(P<0.001). Especially, frozen bellies from northern America were tended to be more accepted than other products. The imported ones were significantly preferred to domestic ones irrespective of age. The results of sensory evaluation of frozen bellies between imported and domestic ones were also confirmed by tested people. It was significantly preferred in domestic frozen bellies(P<0.05). However, one of the domestic from C company was not significantly different from northern products, but was more favor significantly than EU ones(P<0.05). According to the age of tested panels, 20's age preferred the domestic ones of C company. In contrast, the groups of 30's and 40's age preferred the northern American produce.

• The Journal of Korean Society of Virology
• /
• v.30 no.3
• /
• pp.189-202
• /
• 2000

This study was conducted to see what types of bovine rotaviruses were isolated at Jedong farm in Jeju province and Seohwa farm in Chungnum province. The results were as follows. 1. Rotavirus was positively detected in 18 out of 39 fecal samples from calves with diarrhea in Jeju province and in 13 out of 18 fecal samples from calves with diarrhea in Chungnam province. 2. The electropherotype pattern of dsRNA for 31 viruses was shown to be 4 : 2 : 3 : 2 type like traditional group A and the imigration pattern of dsRNA was the long type like NCDV (G6), JBR (G6), B223 (G10) and KK3 (G10). 3. The serotypes of the 18 viruses of Jedong and 9 viruses of Seowha were shown to be group A, subgroup I, G6, and P1 by ELISA and PCR analyses. The serotypes of S-2, S-6, S-9 and S-12 viruses of Seowha were shown to be group A, subgroup I, G10, but was not shown to be P type. 4. The partial nucleotide sequence of VP4 of S-8 was 97% homology with that of BRV 033. VP4 of J-10 showed 96% homology with that of BRV 033 in nucleotide sequence.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.268-273
• /
• 2008

Because a procedure is complicated and various related parties participate in the redevelopment and reconstruction project, it can be extended to diverse disputes when the relation with the related parties is smoothly adjusted. In particular, when the dispute occurs in a phase of occupancy after the complete construction, the regional residents-centric association must give up many rights of invisible parts caused by the construction company's profit maximization because they are short of professionalism about the business. Accordingly, this study is aimed at providing the construction project manager's dispute and claim process for responding to the dispute or claim reasonably and for obtaining the client's (association) rights for the reconstruction project, and at developing the checklist for obtaining the necessary documents by each phase, when the dispute or claim is made by the association against the construction company after the completion of construction. Through this study, the association can obtain the related documents in advance and can implement the reasonable response data when the dispute or claim occurs due to it. Also, it will enable the construction manager to analyze the project costs reasonably and will reduce the estimated wastes. That is, the work efficiency is expected to be improved.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.320-326
• /
• 2014

The effects of high shear rate processing on the thermal properties of PC/ABS blends were studied. It was executed by the high shear processing machine (NHSS2-28) at the varied conditions of screw speeds and loaded duration. After the samples were processed with NHSS2-28, the $T_gs$ were shifted from 143 to $133^{\circ}C$, and the behavior of degradation determined by TGA showed two distinct steps before high shear rate processing, while it showed a straight line after the processing. In order to provide the reasons of the properties, it was showen by SEM and UTM that the droplet sizes morphologically decreased after the processing, and the elongations decreased slightly until 1000 rpm of screw speed and then sharply decreased, according to the conditions of high shear rate processing. Therefore, it can be confirmed that $T_g,s$ of PC/ABS blends were considerably shifted under an appropriate high shear rate condition, and rapidly dropped, so that blends degraded above the condition, due to stress-induced degradation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.319-333
• /
• 2017

The construction of long sub-sea tunnel does not provide the favorable condition for the installation of ventilation system to be used during construction due to the constrained construction space. For the ventilation system required during construction, the artificial island where ventilation shaft is located is constructed at some location along the sub-sea tunnel route, which requires a high construction cost. Therefore, it is intended, as much as possible technically, to minimize the construction of artificial island. However, this requires a longer distance between ventilation shafts, there-by causing increased air leakage at the ventilation duct connection points due to the higher fan pressure being required to deliver ventilation air. Previously the air leakage was studied as an important issue. In this study experiments were carried out to develop the improved duct connection method considering various conditions such as, tunnel length, etc. Additionally, its performance results with leakage rates are shown and compared to the "S" class leakage rate of SIA. As a result, the new duct coupling type of improved method is analyzed as applicable to such a 30 km long tunnel with the leakage rate of $1.46mm^2/m^2$, which is better performance than SIA leakage rates.

• Journal of The Korean Association For Science Education
• /
• v.30 no.1
• /
• pp.80-93
• /
• 2010

The scope of this study is: (1) to review or summarize the theoretical explanations of diffusion; (2) to investigate the preservice teachers' understanding of diffusion utilizing the inquiry experiment of diffusion that was developed in this study. The data was collected through questionnaires given to 41 preservice teachers in 3 universities and interviews with 20 subjects from this population, who conducted the inquiry experiment. During the experiment, the data was collected from the students' reports and 3 small groups' audio/video recordings. To understand preservice teachers' conceptions, reports, audio/video recordings, questionnaires and interviews were analyzed and discussed with co-workers. The results follow: (1) The differences between effusion and diffusion as well as equal-pressure experiment and equal-flux one on diffusion were discussed; (2) Most preservice teachers understood effusion and diffusion connected to Graham's law of diffusion by rote and have misconceptions about the diffusion process; (3) They observed two kinds of diffusion experiments (equal-pressure and equal-flux) by inquiry experiment, but the majority of them failed to find conceptual differences between these experiments. After the inquiry experiment, about 40% of the samples modified their conceptions about diffusion.