• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.497-505
• /
• 2016

The two-dimensional (2D) Discrete Cosine Transform (DCT) is used widely in image and video processing systems. The perception of human visualization permits us to design approximate rather than exact DCT. In this paper, we propose a digital implementation of 16-point approximate 2D DCT architecture based on one-dimensional (1D) DCT and Modified Gate Diffusion Input (MGDI) technique. The 8-point 1D Approximate DCT architecture requires only 12 additions for realization in digital VLSI. Additions can be performed using the proposed 8 transistor (8T) MGDI Full Adder which reduces 2 transistors than the existing 10 transistor (10T) MGDI Full Adder. The Approximate MGDI 2D DCT using 8T MGDI Full adders is simulated in Tanner SPICE for $0.18{\mu}m$ CMOS process technology at 100MHZ.The simulation result shows that 13.9% of area and 15.08 % of power is reduced in the 8-point approximate 2D DCT, 10.63 % of area and 15.48% of power is reduced in case of 16-point approximate 2D DCT using 8 Transistor MGDI Full Adder than 10 Transistor MGDI Full Adder. The proposed architecture enhances results in terms of hardware complexity, regularity and modularity with a little compromise in accuracy.

• The KIPS Transactions:PartA
• /
• v.12A no.4 s.94
• /
• pp.313-320
• /
• 2005

The 2-D discrete cosine transform (DCT) is an integral part of video and image processing; it is used in both the PEG and MPEG enciding standards. As streaming video is brought to mobile devices, it becomes important that it is possible to calculate the DCT in an energy-efficient manner. In this paper, we present a new algorithm the DCT with a linear array PEs. This design is optimized for energy efficiency. We analyze the energy, area, and latency tradeoffs available with this design and then compare its energy dissipation, area, and latency to those of Xilinx's optimized IP core.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.100.1-100
• /
• 2003

A dctA gene encoding a protein with identity to a C4-dicarboxylate/H+ was cloned from a beneficial biocontrol bacterium, P. chororaphis O6. Expression of the dctA was induced in minimal medium by several organic acids and was repressed by glucose. Highest expression was observed in early-log cells grown on fumarate and succinate with decline as cells approached late-log phase. The dctA transcript accumulated weakly when cells were grown on malate but strong expression was observed with benzoate. Expression of the dctA transcript was repressed in early-log cells upon addition of glucose to fumarate, but was detected as the cell culture aged. A dctA-deficient mutant of O6, constructed by marker exchange mutagenesis, did not grow on minimal medium containing succinate, benzoate, or fumarate, and growth on malate was delayed. The dctA mutant and wild type grew equally on glucose. The dctA mutant on cucumber roots in sterilized potting soil was colonized at levels comparable to those of the wild type, but induction level of disease resistance by the mutant against target leaf spot disease was decreased. These results may indicate that the dctA is essential for utilization of certain organic acids and its expression is controlled by the availability of sugars. In addition, the dctA is not essenitial for cucumber root colonization, but important for induction of disease resistance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.976-984
• /
• 2006

OFDM system is very useful for the high speed communication system. However, OFDM system has a serious problem of high PAPR that results from the so many subcarriers in the same phase. This OFDM signal is distorted through the nonlinear HPA(High Power Amplifier). Tone reservation method is to insert tone signal in several types to reduce the PAPR after iterating this process by changing the tone signal. Also discrete cosine transform(DCT) can reduces the PAPR as multiplying the cosine value to change the angle and mix up with the data. In the paper, the combination of the TR method and DCT method is newly proposed for more effective reduction of the PAPR. Simulation results show that the proposed method outperforms the conventional simple TR method and DCT method with respect to the PAPR reduction and BER performance.

• Journal of Broadcast Engineering
• /
• v.6 no.2
• /
• pp.121-130
• /
• 2001

We propose an efficient DCT-domain video transcoding algorithm for flexible for bit-rate video communications. Video transcoding provides communication fiexibility by adaptively changing the bit-rate of compressed bit stream. During the transcoding process, adrift error is unavoidable because of the difference between reference images in the series of encoding and decoding. For solving the drift error problem, cascade pixel-domain transcoder (CPDT) has been proposed. CPDT, however, requires highly complex hardware and heavy computational overhead. In this paper we propose a DCT-domain transcoding technique, which enables efficient transcoding without any drift error. The proposed cascade DCT-domain transcoder (CDDT) is realized by new motion compensation and down-sampling methods in the DCT-domain.

• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.423-429
• /
• 2001

In this paper, we propose the improved method for retrieving images with DC element of DCT that is used in image compression such as JPEG/MPEG. The existing method retrieves images with DC of fixed block size DCT. In this method, the increase in the block size results in faster retrieving speed, but it lessens the accuracy. The decrease in the block size improves the accuracy, however, it degrades the retrieving speed. In order to solve this problem, the proposed method utilizes the variable block size DCT. This method first determines the existence of object regions within each block, and then creates an image region table. Based on this table, it determines the size of each block, following a simple rule; decrease the block size in the object regions, and increase the block size in the background regions. The proposed method using variable block size DCT improves about 15% in terms of the accuracy. Additionally, when there rarely exist images of same pattern, it is able to retrieve faster only by comparing the image region patterns.

• Journal of Drive and Control
• /
• v.19 no.1
• /
• pp.43-50
• /
• 2022

The aim of this study was to conduct basic research on the development of a dual-clutch transmission(DCT) and automatic transmission for agricultural tractors. The DCT layout and the DCT simulation model were developed using commercial software. Power transmission efficiency of the DCT and component power loss were analyzed to verify the developed simulation model. Power loss analysis of the components was conducted according to previous studies and ISO(International Organization for Standardization) standards. The power transmission efficiency of the DCT simulation model was 68.4-91.5% according to the gear range. The power loss in the gear, bearing, and clutch DCT system components was 0.75-1.49 kW, 0.77-2.99 kW, and 5.24-10.52 kW, respectively. The developed simulation model not include the rear axle, differential gear, final reduction gear. Therefore actual power transmission efficiency of DCT will be decreased. In a future study, an actual DCT can be developed through the simulation model in this study, and optimization design of DCT can be possible by comparing simulation results and actual vehicle test.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.138-148
• /
• 2001

Digital Video (DV) coding standards for digital video cassette recorder are based mainly on DCT and variable length coding. DV has low hardware complexity but high compressed bit rate of about 26 Mb/s. Thus, it is necessary to encode video with low complex video coding at the studios and then transcode compressed video into MPEG-2 for video-on-demand system. Because these coding methods exploit DCT, transcoding in the DCT domain can reduce computational complexity by excluding duplicated procedures. In transcoding DV into MPEC-2 intra coding, multiplying matrix by transformed data is used for 4:1:1-to-4:2:2 chroma format conversion and the conversion from 2-4-8 to 8-8 DCT mode, and therefore enables parallel processing. Variance of sub block for MPEG-2 rate control is computed completely in the DCT domain. These are verified through experiments. We estimate motion hierarchically using DCT coefficients for transcoding into MPEG-2 inter coding. First, we estimate motion of a macro block (MB) only with 4 DC values of 4 sub blocks and then estimate motion with 16-point MB using IDCT of 2$\times$2 low frequencies in each sub block, and finish estimation at a sub pixel as the fifth step. ME with overlapped search range shows better PSNR performance than ME without overlapping.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.3 s.345
• /
• pp.48-58
• /
• 2006

This paper presents 8x8 two dimensional DCT/IDCT processor of adder-based distributed arithmetic architecture without applying ROM units in conventional memories. To reduce hardware cost in the coefficient matrix of DCT and IDCT, an odd part of the coefficient matrix was shared. The proposed architecture uses only 29 adders to compute coefficient operation in the 2-D DCT/IDCT processor, while 1-D DCT processor consists of 18 adders to compute coefficient operation. This architecture reduced 48.6% more than the number of adders in 8x8 1-D DCT NEDA architecture. Also, this paper proposed a form of new transpose network which is different from the conventional transpose memory block. The proposed transpose network block uses 64 registers with reduction of 18% more than the number of transistors in conventional memory architecture. Also, to improve throughput, eight input data receive eight pixels in every clock cycle and accordingly eight pixels are produced at the outputs.

• Journal of Broadcast Engineering
• /
• v.26 no.5
• /
• pp.553-565
• /
• 2021

Point cloud is a set of points for representing a 3D object, and consists of geometric information, which is 3D coordinate information, and attribute information, which is information representing color, reflectance, and the like. In this way of expressing, it has a vast amount of data compared to 2D images. Therefore, a process of compressing the point cloud data in order to transmit the point cloud data or use it in various fields is required. Unlike color information corresponding to all 2D geometric information constituting a 2D image, a point cloud represents a point cloud including attribute information such as color in only a part of the 3D space. Therefore, separate processing of geometric information is also required. Based on these characteristics of point clouds, MPEG under ISO/IEC standardizes V-PCC, which imitates point cloud images and compresses them into 2D DCT-based 2D image compression codecs, as a compression method for high-density point cloud data. This has limitations in accurately representing 3D spatial information to proceed with compression by converting 3D point clouds to 2D, and difficulty in processing non-existent points when utilizing 3D DCT. Therefore, in this paper, we present 3D Discrete Cosine Transform-based Point Cloud Compression (3DCT PCC), a method to compress point cloud data, which is a 3D image by utilizing 3D DCT, and confirm the efficiency of 3D DCT compared to V-PCC based on 2D DCT.