• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.151-161
• /
• 2013

This paper proposes a strategic model of linkage between productivity metrics and financial accounting metrics to properly evaluate the financial effect of TPM activities and the business performance. This linkage strategy provides a connection tool for clear communication between factory-level and headquarters that the metrics proposed by this paper ultimately improves a quality of support from the management by receiving the factors required for productivity activities in the practical field. This factor includes such as equipment, raw materials and labors. Here, we propose that chain reaction models using break down structure of productivity metrics and financial metrics enhance the knowledge sharing of KPI (Key Performance Indicator) which generally tend to create oversimplified communication between management in headquarters and employees in the practical fields. The productivity metrics include OEE(Overall Equipment Effectiveness) of TPM (Total Productive Maintenance), OLE (Overall Labor Effectiveness) of PAC(Performance and Analysis and Control) activities, and OYE (Overall Yield Effectiveness) of TMM(Total Material Management) activities. The financial accounting metrics include ROE(Return on Equity), ROA(Return on Asset), and AVR(Added-Value Rate). The suggested chain reaction model selects the financial metrics as initial stage and branch down until final stage of productivity metrics. When demand exceeds supply, an ideal speed rate, the lean OEE strategy can be initially applied to reduce the gap between the demand and supply, then apply variable costing to estimate correct amount of operating profit. In addition, the paper presents a new type of model for linkage between financial accounting metrics including CAPEX(Capital Expenditure), OPEX(Operating Expenditure), EVA(Economic Added Value), DCL(Degree of Combined Leverage), and TPM productivity activities including AM(Autonomous Maintenance), PM(Preventive Maintenance), MP(Maintenance Prevention) and QM(Quality Maintenance). In order to support the evidence of proposed linkage strategy, a case analysis on 52 projects from national TPM contest from 2011 to 2012 is analyzed. The case presents the classification of CAPEX and OPEX activities from TPM, and proposes the correct implementation of financial effect for TPM projects.

• Structural Engineering and Mechanics
• /
• 제40권3호
• /
• pp.411-429
• /
• 2011

In the past decades, recycling use of demolished concrete was almost limited to the types of recycled coarse aggregate with a size of about 5-40 mm and recycled fine aggregate with a size of about 0-5 mm for concrete structures, and reuse of demolished concrete lumps (DCLs) with a size much larger than that of recycled aggregate, e.g., 50-300 mm, has been limited to roadbed, backfilling materials, or discarded to landfills. Treatment processes of DCLs are much simpler than those of recycled aggregate, leading to less cost and more energy-saving. In the future, the amount of demolished concrete is estimated to be much higher, so reuse of DCLs for concrete structures will become necessary. The objectives of this paper are to document the process of making reinforced concrete beams with DCLs, and to discuss the flexural and shear behaviors of those reinforced DCL beams through an experimental program, which includes three beams filled with DCLs and one conventional beam for investigating the flexural strengths and deformations, and 12 beams filled with DCLs and two conventional beams for investigating the shear strengths and deformations. The authors hope that the proposed concept offers another sustainable solution to the concrete industry.

• 한국광학회지
• /
• 제18권5호
• /
• pp.362-366
• /
• 2007

본 연구에서는 3 메가픽셀, 2.5배 줌 카메라폰 모듈용 비구면 유리렌즈 개발을 목적으로 실험계획법(DOE)을 적용하여 성형용 초경 코어의 연삭가공조건을 구하고, 이를 활용하여 비구면 Glass렌즈 성형용 초경합금(WC) 코어를 초정밀 연삭가공을 수행하였다. 또한 가공된 성형용 코어의 가공면 위에 이온증착법으로 다이아몬드상 탄소(Diamond-Like Carbon; DLC) 코팅을 수행하여 DLC 코팅이 성형용 코어의 형상정도(PV)와 표면조도(Ra)에 미치는 영향을 평가하였으며, 비구면 Glass렌즈를 동일한 조건에서 성형하여 성형렌즈의 광학적 특성을 비교하여 성형용 코어면의 DLC 코팅 효과에 대하여 검토하였다.

• The Journal of Advanced Prosthodontics
• /
• 제8권5호
• /
• pp.333-338
• /
• 2016

PURPOSE. The aim of this study was to compare the effects of different denture cleansers on the surface roughness and microhardness of various types of posterior denture teeth. MATERIALS AND METHODS. 168 artificial tooth specimens were divided into the following four subgroups (n=42): SR Orthotyp PE (polymethylmethacrylate); SR Orthosit PE (Isosit); SR Postaris DCL (double cross-linked); and SR Phonares II (nanohybrid composite). The specimens were further divided according to the type of the denture cleanser (Corega Tabs (sodium perborate), sodium hypochlorite (NaOCl), and distilled water (control) (n=14)) and immersed in the cleanser to simulate a 180-day immersion period, after which the surface roughness and microhardness were tested. The data were analyzed using the Kruskal-Wallis test, Conover's nonparametric multiple comparison test, and Spearman's rank correlation analysis (P<.05). RESULTS. A comparison among the denture cleanser groups showed that NaOCl caused significantly higher roughness values on SR Orthotyp PE specimens when compared with the other artificial teeth (P<.001). Furthermore, Corega Tabs resulted in higher microhardness values in SR Orthotyp PE specimens than distilled water and NaOCl (P<.005). The microhardness values decreased significantly from distilled water, NaOCl, to Corega Tabs for SR Orthosit PE specimens (P<.001). SR Postaris DLC specimens showed increased microhardness when immersed in distilled water or NaOCl when compared with immersion in Corega Tabs (P<.003). No correlation was found between surface roughness and microhardness (r=0.104, P=.178). CONCLUSION. NaOCl and Corega Tabs affected the surface roughness and microhardness of all artificial denture teeth except for the new generation nanohybrid composite teeth.

• 한국조경학회지
• /
• 제26권3호
• /
• pp.78-78
• /
• 1998

The purpose of this research is to develop a CAD-based program for data analysis of digital elevation model(DEM) on the aspect of landscape assessment. When handling DEM data as a visual simulation of topographic landscape, it is basic interest to analyze visible area and visualize visual sensitivity distributions. In reference with landscape assessment, more intuitive and interactive visualizing tools are needed, specially in area of visual approach. For adaptability to landscape assessment, algorithmic approaches to visibility analysis and concepts for visual sensitivity calculation in this study were based on processing techniques of entity data control functions used in AutoCAD drawing database. Also, for the purpose of quantitative analysis, grid-type 3DFACE entities were adopted as mesh unit of DEM structure. Developed programs are composed of main part named VSI written in AutoLISP and two of interface modules written in dialog control language(DCL0 for user-oriented interactive usage. Definitions of camera points(view points) and target points(or observed area) are available alternatively in combined methods of representing scenic landscape, scenery, and sequential landscape. In the case of scene landscape(single camera to fixed target point), only visibility analysis in available. And total visibility, frequency of cumulative visibility, and visual sensitivity analysis are available in other cases. Visual sensitivity was thought as view angle(3 dimensional observed visual area) and the strengths were classified in user defined level referring to statistical characteristics of distribution. Visibility analysis routine of the VSI was proved to be more effective in the accuracy and time comparing with similar modules of existing AutoCAD third utility.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.683-686
• /
• 2023

본 논문에서는 차량 전자 시스템에서 소프트 에러와 공통 고장에 대응하기 위해 두 개의 코어를 지연 동작시킨 후 그 결과를 비교하는 D-DCLS(Delayed Dual Core Lock-Step) 프로세서를 설계하였다. D-DCLS는 어느 코어에서 에러가 발생했는지 알 수 없기 때문에 각 코어를 에러가 발생하기 이전 시점으로 되돌려야 하는데 파이프라인 스테이지 상의 모든 중간 계산값을 되돌리기 위해서는 복잡한 하드웨어 수정이 필요하다. 본 논문에서는 이를 쉽게 구현하기 위해 분기 명령어가 실행될 때마다 모든 레지스터 값을 버퍼에 저장해 두었다가 에러가 발생하면 저장된 레지스터 값을 복구한 후 'BX LR' 명령어를 수행하여 해당 분기 시점으로 자동 복구하도록 하였다. 제안하는 D-DCLS 프로세서를 Verilog HDL로 설계하여 에러가 감지되었을 때 자동으로 복구한 후 정상 동작하는 것을 확인하였다.

• 에너지공학
• /
• 제16권2호
• /
• pp.64-72
• /
• 2007

석탄을 합성석유로 전환시키는 석탄액화(CTL) 공장은 2차 세계대전시 독일 및 영국에서 가동되어 대량의 연료를 공급한 바 있다. 전후 대형 유전이 발견되어 값싼 석유가 공급되면서 CTL 공장의 운전은 중단되었다. 남아프리카공화국의 Sasol사만이 유일하게 1955년에 CTL공장의 조업을 시작하여 현재 하루 15만배럴의 석탄합성석유를 생산하고 있다. 최근 고유가가 지속되고 석유공급에 대한 불안감 때문에 여러 개의 석탄액화 프로젝트가 진행되고 있다. 중국은 2030년까지 석탄함성석유를 연간 3천만톤 (60만배럴/일) 생산할 계획을 수립하였고, 2만배럴/일 규모의 석탄직접액화공장이 2008년 완공될 예정이다. 미국에서도 8개의 CTL 프로젝트가 진행되고 있다. 호주, 필리핀, 인도네시아, 인도 등에서도 석탄액화 프로젝트를 추진하고 있다. 석유를 전량 수업하는 우리나라도 에너지안보 차원에서 CTL에 대한 접근이 필요하다. 본고에서는 석탄액화공정의 역사, 현황 및 최근 동향 그리고 향후 전망에 대하여 기술하였다.

• 조명전기설비학회논문지
• /
• 제20권1호
• /
• pp.125-131
• /
• 2006

X-ray 발생 장치는 X-ray를 촬영할 수 있는 곳에 장착하는 고정 방식과 환자가 있는 병실로 장치를 움직여 X-ray를 촬영할 수 있도록 하는 이동 방식으로 구분할 수 있다. 환자의 상태에 따라 이동 방식은 매우 유용할 수 있지만 병원 내의 AC220[V]를 사용해야 하는 제약이 있었다. 병원으로부터 원거리에 있는 응급환자를 진단하거나 대형 사고에 의한 재난에서 환자를 분류하는 경우 응급 센터의 의사의 역할이 매우 제한적이었다. 따라서 본 연구는 사고 현장이나 이동 중인 구급차 내에서 X-ray 촬영이 가능한 X-ray 전원 장치를 개발하였고 다음과 같은 특성을 얻을 수 있었다. 첫째, X-ray를 발생하기 위한 장치의 전원은 휴대가 간편한 밧데리(DC12[V])를 사용하였다. 둘째, 제어회로는 PIC16F84A를 사용하여 X-ray 발생 장치의 신뢰성을 확보하였고 기능을 다양하게 제공할 수 있었다. 이 특성을 적용한 휴대용 디지털 X-ray발생 장치는 사고 현장에서 X-ray를 촬영하고 환자의 정보를 응급센터에 전달하여 의사의 적절한 처방을 받는 미래 지향적인 응급의료체제가 가능하도록 기여할 것으로 기대된다.