• 제목/요약/키워드: DC23

검색결과 395건 처리시간 0.028초

DC 배전용 반도체 변압기를 위한 직렬 연결된 플라잉 커패시터 멀티-레벨 정류기의 모델 예측 제어 방법 (A Model Predictive Control Method of a Cascaded Flying Capacitor Multi-level Rectifier for Solid State Transformer for DC Distribution System)

  • 김시환;장영혁;김준성;김래영
    • 전력전자학회논문지
    • /
    • 제23권5호
    • /
    • pp.359-365
    • /
    • 2018
  • This study introduces a model predictive control method for controlling a cascaded flying capacitor multilevel rectifier used as an AC-DC rectifier of a solid-state transformer for DC distribution systems. The proposed method reduces the number of states that need to be considered in model predictive control by separately controlling input current, output DC link voltage, and flying capacitor voltage. Thus, calculation time is shortened to facilitate the level expansion of the cascaded flying capacitor multilevel rectifier. The selection of weighting factors did not present difficulties because the weighting factors in the cost function of the conventional model predictive control are not used. The effectiveness of the proposed method is verified through computer simulation using powersim and experiment.

광 MMI와 방향성 결합기에 기초한 새로운 바이오 센서 플랫폼의 구현 (Implementation of Novel Bio-sensor Platform based on Optical MMI and Directional Coupler)

  • 호광춘
    • 한국인터넷방송통신학회논문지
    • /
    • 제23권2호
    • /
    • pp.163-168
    • /
    • 2023
  • 본 논문에서는 화학적 감지 및 바이오 감지를 위한 새로운 플랫폼을 제시하였다. 작동 원리는 광 방향성 결합기(DC)와 다중 모드 간섭 결합기 (MMI)의 결합효율과 간섭특성에 기반한다. 또한, 실리콘 기판에 통합할 수 있도록 평면 기술을 사용하여 실현하였다. 먼저, DC와 MMIC의 분산곡선을 설명하고, 도파관 감도를 증가시키기 위한 최적화된 슬롯 광 도파관의 설계 사양을 선택하였다. 다음으로, 감지 분석물의 굴절률 변화에 대한 센서 응답을 수치해석 하였다. 수치해석 결과, 분석 물질의 굴절률 단위 (RIU) 변화당 높은 유효 지수 변화가 얻어졌으며, 그 감도는 DC 및 MMIC 설계 기법을 사용하여 조정할 수 있음을 보여주었다.

새로운 소용량 승압형 PWM 초퍼 회로의 특성 (Characteristics of New Small Scale Boost PWM Chopper Circuit)

  • 김휘칠;박한석
    • 조명전기설비학회논문지
    • /
    • 제23권9호
    • /
    • pp.98-107
    • /
    • 2009
  • 기존의 하드 스위칭 고주파 PWM DC-DC 컨버터는 펄스 변조 캐리어 주파수의 고주파화를 수반하고, 전력용 반도체 스위칭 소자의 스위칭 손실의 증대나 스위칭 과도현상이 수반된 전압 서지나 전류 서지에 의한 EMI 등의 문제점들이 있다. 이러한 문제를 효과적으로 해결하기 위해 본 논문에서는 새로운 소용량 승압형 PWM 쵸퍼 회로의 동작원리를 서술하고, 시뮬레이션과 실험을 통하여 특성을 도출하였다.

플라이백 컨버터를 이용한 인버터 직류링크 전압의 절연 궤환 (Isolated Feedback of Inverter DC-Link Voltage Using Flyback Converters)

  • 김경서
    • 전력전자학회논문지
    • /
    • 제23권4호
    • /
    • pp.281-285
    • /
    • 2018
  • An isolated feedback method for measuring the inverter DC-link voltage is proposed. This method provides a simple and economical solution to inverter control systems that use a flyback converter as a controller power supply. In the proposed method, data on the DC-link voltage are acquired when the primary side voltage appears on the secondary side of the flyback transformer, thereby eliminating the need to adopt an extra signal isolation method. To solve the non-synchronization problem between the flyback converter switching and main controller sampling, the external interrupt function of the micro-controller is used as a trigger signal for the A/D conversion.

Blind Signal Processing for Medical Sensing Systems with Optical-Fiber Signal Transmission

  • Kim, Namyong;Byun, Hyung-Gi
    • 센서학회지
    • /
    • 제23권1호
    • /
    • pp.1-6
    • /
    • 2014
  • In many medical image devices, dc noise often prevents normal diagnosis. In wireless capsule endoscopy systems, multipath fading through indoor wireless links induces inter-symbol interference (ISI) and indoor electric devices generate impulsive noise in the received signal. Moreover, dc noise, ISI, and impulsive noise are also found in optical fiber communication that can be used in remote medical diagnosis. In this paper, a blind signal processing method based on the biased probability density functions of constant modulus error that is robust to those problems that can cause error propagation in decision feedback (DF) methods is presented. Based on this property of robustness to error propagation, a DF version of the method is proposed. In the simulation for the impulse response of optical fiber channels having slowly varying dc noise and impulsive noise, the proposed DF method yields a performance enhancement of approximately 10 dB in mean squared error over its linear counterpart.

3[kW]급 연료전지용 전력변환기 개발에 관한 연구 (A Study on the Development of 3[kW] Power Conversion System for Fuel Cell)

  • 김세민;박성준;송성근
    • 조명전기설비학회논문지
    • /
    • 제23권5호
    • /
    • pp.88-95
    • /
    • 2009
  • 본 논문은 연료전지용 전력변환기 개발에 관한 연구로 높은 승압비를 갖는 DC/DC 컨버터를 구성함에 있어서 기존 방식과 달리 변압기의 2차측 출력을 직렬로 연결하여 다이오드와 콘덴서 및 리액터를 줄일 수 있는 구조의 새로운 멀티 DC/DC 컨버터의 구조를 제안한다. 이러한 구조는 직렬 연결된 변압기의 2차측의 정류부분과 필터부분이 하나의 모듈로 구성되는 장점을 가지며 레벨수의 증가가 용이하다. 또한 제안된 구조에서 출력전압 리플을 줄일 수 있는 새로운 가변 위상 변위형 스위칭 방식을 제안한다. 이러한 모든 사항을 시뮬레이션과 실험을 통하여 검증 하였으며, 제안된 컨버터는 넓은 영역의 출력이 요구되는 부하에 매우 유용할 것으로 사료된다.

배압 회로를 이용한 인터리브 AC/DC 컨버터의 효율 특성에 관한 연구 (A Study on the Efficiency of Intereaved AC/DC Converter using Voltage-Doubler)

  • 서상화;배진용;권순도;엄태민;김용
    • 조명전기설비학회논문지
    • /
    • 제23권12호
    • /
    • pp.127-135
    • /
    • 2009
  • 본 연구에서는 2개의 인덕터를 이용한 인터리브 AC/DC 승압형 컨버터의 듀티 사이클이 0.5 이상일 때 배압 회로 특징을 나타내었다. 일반적으로 AC/DC 승압형 컨버터는 낮은 입력전압(입력 AC 110[V])이 높은 입력전압(입력 AC 220[V])에 비하여 낮은 효율을 갖는다. 제안된 인터리브 AC/DC 승압형 컨버터는 낮은 입력전압에서 배압 회로로 동작함으로 인하여 낮은 입력전압을 사용하는 기존의 컨버터와 비교하여 높은 역률과 향상된 효율을 갖는다. 본 연구에서는 배압 회로 동작하는 하는 인터리브 AC/DC 승압형 컨버터를 제안하고, 모드별 해석과 특성을 논의하였으며, 300[W]급 시작품을 제작하여 그 타당성을 검증하였다.

데드 타임 제어기를 이용한 웨어러블 AMOLED 디스플레이용 DC-DC 부스트 변환기 (DC-DC Boost Converter Using Dead Time Controller for Wearable AMOLED Display)

  • 김찬유;김태운;최호용
    • 전기전자학회논문지
    • /
    • 제23권3호
    • /
    • pp.1104-1107
    • /
    • 2019
  • 본 논문에서는 데드 타임을 줄여 전력 효율을 높이기 위해 데드 타임 제어기를 이용한 웨어러블 AMOLED 디스플레이용 DC-DC 부스트 변환기를 제안한다. 또한, 본 변환기에서는 경부하에서 전력 효율을 높이고 출력 전압 리플을 감소시키기 위해 PWM-SPWM (set-time variable pulse width modulation) 듀얼 모드를 이용한다. 제안하는 회로는 $0.18{\mu}m$ BCDMOS 공정을 이용하여 시뮬레이션을 한 결과 1 mA~70 mA의 부하 전류 범위에서 39%~96%의 전력 효율과 2 mV의 리플 전압을 가졌다. 본 회로의 전력 효율은 PWM-SPWM 방식보다 최대 2% 상승하였고, PWM 방식보다 최대 8% 상승하였다.

소의 친자감정을 위한 Microsatellite markers의 유전적 다양성 분석 (Analysis of genetic diversity for cattle parentage testing using microsatellite markers)

  • 조길재;양영진;이길왕
    • 대한수의학회지
    • /
    • 제44권2호
    • /
    • pp.287-292
    • /
    • 2004
  • The objective of present study was to ascertain genetic diversity for cattle parentage testing. A total of 59 random cattle samples(29 Korean native cattle and 30 dairy cows) were genotyped by using 11 microsatellite loci(BM1824, BM2113, ETH10, ETH225, EH3, INRA23, SPS115, TGLA122, TGLA227, TGLA53, and TGLA126). This method consisted of multiplexing PCR procedure and showed reasonable amplification of all PCR products. Genotyping was performed with an ABI 310 genetic analyzer. The number of alleles per locus varied from 5 to 11 with a mean value of 6.73 in the Korean native cattle(KNC), 4 to 9 with a mean of 5.91 in dairy cows(DC). Expected heterozygosity was ranged 0.534~0.855(mean 0.732), 0.370~0.866(mean 0.692) in the KNC and DC, respectively. PIC value was ranged 0.485~0.821(mean 0.684), 0.336~0.834(mean 0.640) in the KNC and DC, respectively. Of the 11 markers, 7 markers(ETH10, EH3, INRA23, SPS115, TGLA122, TGLA227, TGLA53) and 3 markers(INRA23, TGLA227, TGLA53) have relatively high PIC value (>0.7) in the KNC and DC, respectively. The total exclusion probability of 11 microsatellite loci was 0.9997 and 0.9991 in the KNC and DC, respectively. These results present basic information for developing a system for parentage verification and individual identification in the KNC and DC.

MPC5553 DSP 기반의 전기버스 전장시스템용 3kW급 절연형 DC/DC 컨버터의 설계 (3kW-Isolated DC/DC Converter Design based on MPC5553 DSP for EV Bus Electronic System)

  • 김기만;이승경;박상훈;이정효;이상석;원충연
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2010년도 하계학술대회 논문집
    • /
    • pp.23-24
    • /
    • 2010
  • 본 논문에서 설계한 3kW급 절연형 DC/DC 컨버터는 전기 버스의 주 동력원인 고전압 배터리로부터 차량의 전장시스템에 저전압 전원을 공급한다. 이 전력변환에는 고전압 배터리측과 저전압 배터리측의 절연이 반드시 필요하기 때문에 고주파 변압기를 사용한 절연형 DC/DC 컨버터가 일반적으로 사용된다. 따라서 ZVS 동작이 가능한 위상천이 방식의 풀-브리지 컨버터를 선정하였다. 본 논문에서 사용된 전력변환장치는 차량시스템에 적용하기 적합한 프리스케일사의 32-Bit DSP인 MPC5553 기반의 제어기를 이용한 실험을 통해 타당성을 검증하였다.

  • PDF