• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.239-240
• /
• 2015

본 논문에서는 가정용 단상 계통연계 인버터의 전압손실과 직류링크측 맥동 전압을 고려한 배터리 공칭전압 설계법을 제안한다. 일반적으로 가정용 단상 계통연계 인버터는 3kWh 정도의 낮은 에너지용량을 갖는 배터리팩의 수명 관리상 배터리의 공칭전압은 48V정도로 낮게 설계된다. 단상계통연계형 인버터의 직류링크전압에는 필연적으로 기본주파수의 2배에 해당하는 맥동성분이 포함된다. 이 맥동성분은 계통연계시 전원측 전류에 저차 고조파를 생성하여 전력품질의 저하를 초래하게 된다. 따라서 직류링크측 맥동성분 간섭을 제거하기위한 피드포워드 제어방식을 채택한 단상계통연계형 인버터의 제어시스템을 수립하고, 인버터의 전압손실과 직류링크측 맥동전압을 고려한 배터리 공칭전압 설계법을 제안하며, 시뮬레이션을 통해 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.307-308
• /
• 2015

본 논문은 3-레벨 T-type 인버터의 새로운 중성점 전압 제어 기법을 제안한다. 3-레벨 T-type 인버터는 dc-link 전압을 커패시터 2개로 나누어 사용하며 두 커패시터간의 전압 차이로 인해 출력 전압의 왜곡을 야기한다. 공간 벡터 변조 기법으로 P-type과 N-type 전압 벡터의 스위칭 시간을 조절함으로써 복잡한 수학적 모델링 없이 중성점 전압을 제어하는 간단한 방식을 제안하였다. 제안된 중성점 제어 알고리즘을 설명하고, 10kW급 3-레벨 T-type 인버터 시제품을 제작하여 본 논문에서 제안하는 방식에 대한 타당성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.496-497
• /
• 2012

전해 커패시터는 인버터 등을 포함하는 전력 변환 장치에 직류 전압 평활용으로 사용되며, 다른 구성 요소와 비교하여 고장 발생률이 가장 높다. 본 논문은 이러한 전해 커패시터의 상태를 진단하는 방법에 대한 것으로 커패시터 전압의 충, 방전을 이용한다. 전해 커패시터가 충전된 상태에서 전동기에 전류를 인가함으로써 커패시터에 충전된 에너지를 방전 시키고, 방전된 에너지로부터 커패시턴스를 추정한다. 정상 상태의 커패시터와 열화된 상태의 커패시터의 용량 변화로부터 커패시터의 상태를 판별한다. 본 논문에서 제안된 기법은 상용 인버터에 적용하는 데 추가의 하드웨어가 필요하지 않아 저가로 구현할 수 있으며, 커패시터 용량의 변화를 신뢰성 있게 추정할 수 있기 때문에 커패시터 고장진단에 효과적이다.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.3
• /
• pp.129-135
• /
• 2017

This paper introduces a design and a simulation of a hybrid active power filter (HAPF) for harmonics reduction given an ideal supply source. The synchronous reference frame method has been used here to identify the reference currents. The proposed HAPF uses a new artificial- intelligence technique called Particle Swarm Optimization (PSO) for tuning the parameters of a proportional and integral controller called PI-PSO. The PI-PSO controller is used to archive optimality for the DC-link voltage of the HAPF-inverter. The hysteresis non-linear current control method is used in this approach to compare the extracted reference and the actual currents in order to generate the pulse gate required for the HAPF. Results obtained by simulations with Matlab/Simuling show that the proposed approach is very flexible and effective for eliminating harmonic currents generated by the non-linear load with the HAPF based PSO tuning.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1418-1423
• /
• 2007

The topology of LLC half bridge resonant converter provides ZVS characteristic. The voltage stress and current stress are smaller than that of the general resonant converters. So the LLC HB resonant converter can be considered as a optimal circuit for the notebook computer adapter. In the adapter design, we should consider the weight, the size and the overheat of the adapter. Thus the higher efficiency is an essential particular. First of all, the optimal design of transformer is the most important facts. Some parameters should be considered in order to get the highest efficiency. The adapter is designed through the considering of these parameters including the PFC circuit as the pre-regulator. It converts AC line input into about DC 390V link voltage of the LLC HB converter input and the converter has 16V/90W ratings. The efficiency measured is about up to 93%.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.135-137
• /
• 2005

In servo system demanding precision dynamic characteristics, application of the Permanent Magnet Linear Synchronous Machines (PMLSM) has advantage of analysis convenience by simple geometry and thrust ripple reduction from the sinusoidal back electromotive force and excited stator. Therefore, this paper presents design of surface-mounted PMLSM with slotless iron cored stator according to coil turns to satisfy the rate thrust. Also, from dynamic analysis for servo application of manufactured motor with heavy mass, we offer accurate range of the DC link voltage and acceleration in rate speed. This is applied to speed reference profile considering system characteristics in total length of moving position.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1483-1485
• /
• 2005

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator. in our project, we develop the UPQC(Unfied Power Quality Compensator of 45kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power quality problems. As a series and shunt compensator, UPQC consists of two inverters with common dc link capacitor bank. It compensates the current quality in the shunt part and the voltage quality in the series part. In this paper, we present simulation and test result of developed UPQC system. Test for UPQC are performed at voltage sag, flickers and non-linear load conditions. For voltage sag and ficker generation, we use RTDS(Real Time Digital Simulator) and power amplifier system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.754-763
• /
• 2002

Direct drive servovalve(DDV) is a kind of one-stage valve since the rotary motion of DC motor is directly transferred to the linear motion of valve spool through the link. Since the structure of DDV is simple, it is less expensive, more reliable and offers reduced internal leakage and reduced sensitivity to fluid contamination. However, the flow force effect on the spool motion is significant such that it induces large steady-state error in a step response. If the proportional control gain is increased to reduce the steady-state error, the system becomes unstable. In order to satisfy the system design requirements, the classical controller is designed using the analytical Bode method.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.127-128
• /
• 2015

소형 전자장비의 증가에 따라 배터리와 배터리 충전기 사용 또한 증가하고 있으며, 이에 따른 충전기의 고효율 확보가 중요해지고 있다. 본 논문에서는 Buck PFC 및 LLC 공진형 컨버터를 기반으로 LLC 공진형 컨버터의 스위칭 주파수 제어 방식과 DC Link 전압 가변 제어 방식의 효율을 비교 분석 한다. 이를 통해 효율적인 배터리 충전을 위한 제어 알고리즘 도출하고 충전 시스템을 설계한다.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1866-1878
• /
• 2018

This paper presents a neutral point deviation and ripple compensation control method for application to 3-level NPC converters. The neutral point deviation and its harmonic components are analyzed with a focus on the average current flowing through the neutral point of the dc-link. This paper also proposes a control scheme to compensate for the neutral point deviation and dominant harmonic components under generalized unbalanced grid operating conditions. The positive and negative sequence components of the pole voltages and ac input currents are employed to accurately explain the behavior of 3-level NPC converters. Simulation and experimental results are presented to verify the validity of the proposed method.