• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.665-666
• /
• 2008

Inserted HTS (high temperature superconducting) coil is promisingly expected as a solution for achievement of higher fields such as GHz scale NMR magnet. However, HTS magnet causes persistent current decay in the persistent current mode and this decay should be compensated in order to keep stable magnetic field. As a solution for the decay in the HTS magnets, we proposed a new type superconducting power supply, i.e., linear type magnetic flux pump (LTMFP). The LTMFP mainly consists of DC bias coil, 3-phase AC coil and superconducting Nb foil. The compensating current in closed superconductive circuit can be easily controlled by the intensity of 3-phase AC current and its frequency. In this study, it has been investigated that the flux pump can effectively charge the current for various frequencies according to the different load magnets.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.904-905
• /
• 2008

In this paper, a novel 60kV, 300A, 3kHz pulsed power supply based on IGBT stacks is proposed. Proposed scheme consists of series connected 9 power stages to generate maximum 60kV output pulse and 15kW series resonant power inverter to charge DC capacitor voltage. Each power stages are configured as 8 series connected power cells and each power cell generates up to 830VDC, 300A pulses. Finally pulse output voltage is applied using total 72 series connected IGBTs. The synchronization of gating signal is important of series operation of IGBTs. For gating signal synchronization, full bridge inverter and pulse transformer generates on-off signals of IGBT gating and specially designed gate power circuit was used.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.550-553
• /
• 2002

A source meter is a basic instrument to perform a measurement of DC characteristic of semiconductor devices. the source meter can be used as variable voltage source, variable current source, voltage meter, or current meter. The accuracy of the low current measurement can be improved with the compensation of leakage current and charge and discharge current. In the low current measurement, the RC time constant is extremely big, so the measurement speed is very low. In this thesis, the analysis of the behavior of the measurement current according to the RC time constant and output capacitance and the method to accelerate the measurement speed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.5
• /
• pp.376-382
• /
• 2001

Magnetic and transport properties in the ceramic specimen of L $a_{0.7}$S $r_{0.3}$Fe $O_3$ with orthohombic structure has been investigated. Weak ferromagnetism has been observed in a ceramic sample of L $a_{0.7}$S $r_{0.3}$Fe $O_3$. Large dielectric relaxation of Debye type is observed in paramagnetic states within the temperature range of 130K~200K. From the temperature dependence of the characteristic frequency, we concluded that the elementary process of the dispersion is related to holes hopping between F $e^{3+}$ and F $e^{4+}$ ions. The temperature dependencies of thermoelectric power and Dc conductivity suggest that the charge carrier responsible for the conduction are strongly localized. These experimental results have been interpreted in terms of a hopping process involving small polaron.n.laron.n.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.226-226
• /
• 2011

소형 대기압 플라즈마 소스는 그 형태에 따라 DBD (Dielectric Barrier Discharge)나 Plasma Needle, 혹은 Plasma Jet 등으로 구별되며, 구동 파형의 특성에 따라 DC, RF (Radio Frequency), 혹은 Pulsed 방식 등으로 나뉜다. 또한 코로나 방전도 소형 대기압 플라즈마 장치에서 사용된다. DBD는 1857년 Siemens에 의해 최초로 보고 되었고 산업 분야에서 대규모로 사용되어 왔다. 본 연구에서는 대향 방전 DBD 대신 유전체 양쪽 면에 전극이 도포된 면방전 형태의 DBD 구조 내부로 He 가스가 흐를 때의 방전에 대한 광학적 진단을 수행하였다. 전극간의 거리와 가스 유속의 변화에 따라 방전 특성이 어떻게 달라지에 대해서 Optical Emission Spectroscopy (OES)를 통하여 생성되는 radical 종의 변화를 측정하고 ICCD (intensified charge coupled device) image를 통해 방전이 시간에 따라 어떻게 진행되는지를 진단하였다.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.124-126
• /
• 1988

The induction motor is constantly operated by general source, thus its speed control is employed an inverter system which can convert DC into AC. The CSI(Current Source Inverter) which have a commutation capacitor in its circuit is liable to cause a voltage spike that it is due to charge and discharge of commutation capacitor. And six phases inverter makes a number of harmonics. These have a effect upon the induction motor badly. This paper aims to suggest a way to reduce such adverse effects by maximally cutting the voltage spike as well as by eliminating a number of harmonics through the operation of Multi-HFCSI.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.917-918
• /
• 2006

In this paper, a novel new pulse power generatorbased on IGBT stacks is proposed for pulse power application. Proposed scheme consists of series connected 9power stages to generate maximum 60kV output pulse and one series resonant power inverter to charge DC capacitor voltage. Each power stages are configured as 8 series connected power cells and each power cell generates up to 850VDC pulse. Finally pulse output voltage is applied using total 72 series connected IGBTs. The synchronization of gating signal is importantfor series operation of IGBTs. For gating signal synchronization, full bridge inverter and pulse transformer generates on-off signals of IGBT gating and specially designed gate power circuit was used.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.930-939
• /
• 2009

A bimodal tram is being developed to combine the flexibility of a bus with the punctuality of a train. The propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. This paper presents the experimental results of the series hybrid propulsion power unit using an active loader which can simulate powering and regenerative braking conditions of the propulsion equipments continuously. The power sharing scheme between PWM converter and a battery pack has been observed. The measurement results of DC link voltage and SOC(State Of Charge) of battery pack are presented.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.392-393
• /
• 2017

본 연구에서는 에너지 저장시스템인 ESS 에너지 분배에 관한 시스템을 설계 및 제작하고 성능을 평가하였다. ESS에 충전하는 방법은 현재 기존의 상용전원을 전지에 충전하는 방식과(연계형) 태양광 에너지를 이용한 방법(독립형)으로 나누어져 있다. 본 연구에서는 어느 한쪽을 선택해야하는 번거로움을 줄여 상용전원과 태양광을 동시에 충전할 수 있는 시스템으로 설계하였다. 이러한 방법은 날씨 및 기타 외부적 환경이 좋지 않을 경우 일반 상용전원(AC 220V)를 이용하며 외부적 환경이 좋을 때는 태양전지로 충전이 가능하도록 연계형과 독립형이 동시에 가능하도록 구성하였다. 또한 출력에서 기존의 AC 220V 출력뿐만 아니라 DC12V, 24V의 전압과 USB(5V)도 동시에 출력이 가능하게 설계하므로 필요한 전압을 외부의 인버터나 컨버터가 필요 없이 바로 사용할 수 있도록 배분하였다. 따라서 본 연구에서는 ESS의 전력을 효율적으로 배분하므로 효율성을 증가시키고 내부의 배터리를 보호하는 시스템을 구성하여 그 성능평가를 실시하였으며 실험결과 효율적으로 배분된 전력을 얻을 수 있음을 검증하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1130-1132
• /
• 2009

We propose a novel way for enhancement of efficiency on a quasi solid-state dye-sensitized solar cell (DSSC). It contained gel type electrolyte mixing the liquid crystal (LC) of specific concentration and applied voltage for alignment of the LC. Aligned LC is supported charge transfer inside electrolyte and efficiency is increased in DSSC. We made a quasi solid-state DSSC which applied DC voltage or not and have measured the power conversion efficiency (PCE) and the fill factor. From measurement, we obtain high performances in case of cell applied voltage compare to reference cell.