• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.139-162
• /
• 2002

Since weak zones or geological lineaments are likely to be eroded, weak zones may develop beneath rivers, and a careful evaluation of ground condition is important to construct structures passing through a river. Dc resistivity surveys, however, have seldomly applied to the investigation of water-covered area, possibly because of difficulties in data aquisition and interpretation. The data aquisition having high quality may be the most important factor, and is more difficult than that in land survey, due to the water layer overlying the underground structure to be imaged. Through the numerical modeling and the analysis of case histories, we studied the method of resistivity survey at the water-covered area, starting from the characteristics of measured data, via data acquisition method, to the interpretation method. We unfolded our discussion according to the installed locations of electrodes, ie., floating them on the water surface, and installing at the water bottom, since the methods of data acquisition and interpretation vary depending on the electrode location. Through this study, we could confirm that the dc resistivity method can provide the fairly reasonable subsurface images. It was also shown that installing electrodes at the water bottom can give the subsurface image with much higher resolution than floating them on the water surface. Since the data acquired at the water-covered area have much lower sensitivity to the underground structure than those at the land, and can be contaminated by the higher noise, such as streaming potential, it would be very important to select the acquisition method and electrode array being able to provide the higher signal-to-noise ratio data as well as the high resolving power. The method installing electrodes at the water bottom is suitable to the detailed survey because of much higher resolving power, whereas the method floating them, especially streamer dc resistivity survey, is to the reconnaissance survey owing of very high speed of field work.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.1
• /
• pp.55-63
• /
• 2000

This paper investigated the sub-region compression effect of the three dimensional DCT(3D-DCT) using the difference component(DC) of inter-frame in images. The proposed algorithm are the method that obtain compression effect to divide the information into subband after 3D-DCT, the data appear the type of cubic block(8${\times}$8${\times}$8) in eight difference components per unit. In the frequence domain that transform the eight differential component frames into eight DCT frames with components of both spatial and temporal frequencies of inter-frame, the image data are divided into frame component(8${\times}$8 block) of time-axis direction into 4${\times}$4 sub block in order to effectively obtain compression data because image components are concentrate in corner region with low-frequency of cubic block. Here, using the weight of sub block, we progressed compression ratio as consider to adaptive sub-region of low frequency part. In simulation, we estimated compression ratio, reconstructed image resolution(PSNR) with the simpler image and the complex image contained the higher frequency component. In the result, we could obtain the high compression effect of 30.36dB(average value in the complex-image) and 34.75dB(average value in the simple-image) in compression range of 0.04~0.05bpp.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.17-26
• /
• 2008

In this paper, we propose a distributed multi-view video coding method employing illumination compensation for multi-view video coding. Distributed multi-view video coding (DMVC) methods can be classified either into a temporal or an inter-view interpolation-based ones according to ways to generate side information. DMVC with inter-view interpolation utilizes characteristics of multi-view videos to improve coding efficiency of the DMVC by using side information based on the inter-view interpolation. However, mismatch of camera parameters and illumination change between two views could bring about inaccurate side information generation. In this paper, a modified distributed multi-view coding method is presented by applying illumination compensation in generating the side information. In the proposed encoder system, in addition to parity bits for AC coefficients, DC coefficients are transmitted as well to the decoder side. By doing so, the decoder can generate more accurate side information by compensating illumination changes with the transmitted DC coefficients. We found that the proposed algorithm is $0.1{\sim}0.2\;dB$ better than the conventional algorithm that does not make use of illumination compensation.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.114-125
• /
• 2002

In this paper, we are proposing a hierarchical segmentation method that first segments the video data into units of shots by detecting cut and dissolve, and then decides types of camera operations or object movements in each shot. In our previous work[1], each picture group is divided into one of the three detailed categories, Shot(in case of scene change), Move(in case of camera operation or object movement) and Static(in case of almost no change between images), by analysing DC(Direct Current) component of I(Intra) frame. In this process, we have designed two-stage hierarchical neural network with inputs of various multiple features combined. Then, the system detects the accurate shot position, types of camera operations or object movements by searching P(Predicted), B(Bi-directional) frames of the current picture group selectively and hierarchically. Also, the statistical distributions of macro block types in P or B frames are used for the accurate detection of cut position, and another neural network with inputs of macro block types and motion vectors method can reduce the processing time by using only DC coefficients of I frames without decoding and by searching P, B frames selectively and hierarchically. The proposed method classified the picture groups in the accuracy of 93.9-100.0% and the cuts in the accuracy of 96.1-100.0% with three different together is used to detect dissolve, types of camera operations and object movements. The proposed types of video data. Also, it classified the types of camera movements or object movements in the accuracy of 90.13% and 89.28% with two different types of video data.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.34-40
• /
• 2003

The paper presents a method to detect dissolve shots of video scene change detections in an MPEG compressed domain. The proposed algorithm uses color-R DCT coefficients of Ⅰ, P-frames for a fast operation and accurate detection and a minimum decoding process in MPEG sequences. The paper presents a method to detect dissolve shot for three-dimensional visualization and analysis of Image in order to recognize easily in computer as a human detects accurately shots of scene change. First, Color-R DCT coefficients for 8*8 units are obtained and the features are summed in a row. Second, Four-step analysis are Performed for differences of the sum in the frame sequences. The experimental results showed that the algorithm has better detection performance, such as precision and recall rate, than the existing method using an average for all DC image by performing four step analysis. The algorithm has the advantage of speed, simplicity and accuracy. In addition. it requires less amount of storage.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.725-728
• /
• 2000

본 논문에서는 영상검색 기법에서 핵심인 Shot Change Detection 과 Non Linear Browsing 을 H/W기반으로 구현하여, S/W 적으로는 비실시간으로만 가능하였던 video indexing 을 DTV 에 적용하여 실시간으로 구현하는 방법을 제시한다. 이를 위해 H/W part 는 실시간으로 들어오는 방송용 MPEG-2 bitstream 을 full decoding 이 아닌 최소화된 VLD(Variable Length Decoding) 수준의 parsing 으로 picture 내의 luminance와 chrominance 의 DC 값, macroblock type, motion vector 정보를 얻어내어 각각의 histogram을 계산하여 memory interface를 통해 S/W 측에 넘겨주게 되고 S/W 는 각 상황에 맞게 indexing algorithm 을 변화시키며 최적의 video indexing 방법으로 확장할 수 있도록 하였다.

• Investigative Magnetic Resonance Imaging
• /
• v.1 no.1
• /
• pp.79-85
• /
• 1997

Fast spin echo imaging utilizes multiple spin echoes to encode multiple k-space lines instead of multiple $T_2-weighted$ images. As results, intensities in k-space data are varying according to T2 decay, which generates Gibb's artifact in the reconstructed image. The echo time for e encoding dc block determines contrast, as is specified by the effective echo time, however, all location of other echoes to different k-space frequency blocks in fast spin echo imaging is not f fully investigated. In this study, symmetric arrangement of multiple echoes in k-space is investigated to reduce Gibb's artifact. Design of filters based on the measurement of multiple e echo intensities is also proposed in two stage manner, i.e., equalization and filtering. From s simulation and experiment, it was observed that Gibb's phenomena were substantially reduced b by the proposed methods.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.5
• /
• pp.385-393
• /
• 2001

We have developed a Differential Absortion LIDAR (DIAL) method for the measurement of lower tropospheric ozone concentration. We used two laser beams from quadrupled Nd:YAG (266 nm) for the resonance wavelength and dye lasers (299.5 nm) for non -resonance wavelength. Aerosol extinction coefficients in the lower troposphere was computed by both Klett and Slope methods. To correct the SIN (Signal -Induced Noise) effect caused by photo detector, we subtracted a new-fitted baseline on the background part of a LIDAR signal, after the subtraction of the DC level. This is because SIN can be treated as an exponentially decaying tail. Using theme results, ozone profiles were obtained approximately 2km at daytime and 3km at nighttime. We compared the results derided by the Slope method with those measured by UV spectrometer. The computed results are in mostly good agreement with experimental results. In the measurement of the vertical layer, we observed the variation of the ozone profiles around the top mixed layer.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.245-249
• /
• 1989

From the careful analysis of the transformed dq system equations of a PWM Voltage Source Converter ( PWM - VSC ), a novel voltage control is proposed which is based on the derivative of in-phase current component of line currents and the relation between dc-link voltage and in-phase current component. A simple logical algorithm to implement the proposed scheme is also presented at transient state. The sinusoidal PWM is adopted at steady state. The simulation results show good transient characteristics.

• 한국가시화정보학회:학술대회논문집
• /
• 2003.11a
• /
• pp.75-78
• /
• 2003

An interfacial instability has recently been observed for the DC- and AC-powered electroosmotic flows of the two miscible electrolyte layers having different concentrations in microchannels. It is rather contrary to our common belief that the flow inside a microchannel is generally stable due to the dominant role of the viscous damping. In this work, we visualized the electroosmotic flow inside a T-channel to validate the numerical predictions. It is clearly shown that the strong vortices (which characterize the interface shapes) are generated at the interface of the two fluids, as was predicted in the numerical analysis.