• Reproductive and Developmental Biology
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2004

The present study was carried out to examine the effect of four different media (NCSU (North Carolina State University)-23, PZM (Porcine Zygotes Medium)-3, PZM-4 and TCM (Tissue Culture Medium)-l99) and two oxygen concentrations (39 , 5% $O_2$, 5% $CO_2$ and 90% $N_2$, 5% $CO_2$ in air) on in vitro production of porcine IVM/IVF embryos. The results were summarized as follows: The rates of GVBD and nuclear maturations were not significantly different (p>0.05) for 44 hours of culture with four media in two oxygen concentrations. The rates of polyspermy, penetrated sperm(s) and male and female prouclei formation were not significantly different (p>0.05). among four media in two oxygen concentrations. The cleavage rates were not significantly different (p>0.05) among four media in two oxygen concentrations. At day 7 under gas atmosphere of 5% $O_2$, 5% $CO_2$ and 90% $N_2$, the blastocyst formation was significantly higher (p<0.05) in PZM-3 (19.9$\pm$2.4) than other media. Also, NCSU-23 medium gave high rate of blastocyst formation at day 7 under gas atmosphere of 5% $CO_2$ in air (p<0.05). Based on the result of differential staining of porcine blastocyst at dat 7, inner cell mass cell and total cell numbers were not significantly different (p>0.05) among four media in two oxygen concentrations. However, the observed total cell number was higher in PZM-3 medium (36.8$\pm$6.5) than other madia. In conclusion, these results suggested that in vitro production of porcine embryos in PZM-3 medium under a gas atmosphere of 5% $O_2$, 5% $CO_2$ and 90% $N_2$ was effective on the blastocyst formation rate and total blastocyst cell number.

• Korean Journal of Weed Science
• /
• v.8 no.1
• /
• pp.64-70
• /
• 1988

An experiment was carried out to know the effects of paclobutrazol on the lodging related traits and yield of a japonia (Seomjinbyeo) and an indica (Samgangbyeo) rice variety grown at 3 N levels (10, 20, 30 kg/10a) and 3 N split rates [basal + top dressing 15 days after transplanting (DAT) : top dressing 25 days before heading (DBH) was 100 : 0, 80 : 20, and 60 : 40]. Paclobutrazol (3kg/10a of 0.6% G) was applied 15 DBH and lodging related traits were observed 3, 13, 23, and 33 days after heading (DAH). The results obtained summarized as follows. 1. Culm length was increased as N level increased, but decreased by application of paclobutrazol. Culm length was not affected by N split rates in both varieties. 2. Lodging was not occurred at all plots, but lodging index of Seomingbyeo was much greater than that of Samgangbyeo. In both varieties loding index increased up to 23 DAH due to an increase in fresh weight and a decrease in breaking strength and levelled off thereafter due to a decrease in both fresh weight and breaking strength. 3. Culm length of Seomjinbyeo and fresh weight of shoot and culm length of Samgangbyeo were positively correlated with lodging index, but breaking strength was not correlated with lodging index in both varieties during the most of ripening stages. Direct effect of culm length contributing to lodging index was positive and much greater than that of fresh weight and breaking strength in Seomjinbyeo, but in Samganbyeo direct effect of culm length and fresh weight was positive, but that of breaking strength was negative with similar magnitudes. 4. Yield in brown rice of Seomjinbyeo was not affected by N level, but split application of N increased yield. In contrast, yield of Samgangbyeo was increased as N level increased, but yield was not affected by N split rates. Paclobutrazol did not affect yield of rice in Seomjinbyeo, but decreased yield by 5.2% in Samgangbyeo due to a decrease in the number of spikelets per panicle.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.874-882
• /
• 2017

As the interest on the air-pollution is gradually rising up at home and abroad, automotiv e and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward three main issues : evaporative, performance, air pollution. In addition, researcher studied the environment problems of the bio-ethanol, bio-butanol, bio-ETBE (Ethyl Tertiary Butyl Ether), MTBE (Methyl Tert iary Butyl Ether) fuel contained in the fuel as octane number improver. The researchers have many dat a about the health effects of ingestion of octane number improver. However, the data support the con clusion that octane number improver is a potential human carcinogen at high doses. Based on the bio-fuel and octane number improver types (bio-ethanol, bio-butanol, bio-ETBE, MTBE), this paper dis cussed the influence of gasoline fuel properties on the evaporative emission characteristics. Also, this p aper assessed the acceleration and power performance of gasoline vehicle for the bio-fuel property. As a result of the experiment, it was found that all the test fuels meet the domestic exhaust gas standards, and as a result of measurement of the vapor pressure of the test fuels, the bio - ethanol : 15 kPa and the biobutanol : 1.6 kPa. thus when manufacturing E3 fuel, Increasing the biobutanol content reduces evaporation gas and vapor pressure. In addition, Similar accelerating and powering performance was shown for the type of biofuel and when bio-butanol and bio-ethanol were compared accelerated perf ormance was improved by about 3.9% and vehicle power by 0.8%.

• Journal of Bio-Environment Control
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2019

The study aimed to determine effects of light emitting diode (LED) and the ultraviolet radiation (UVA) light of plant factory on plant growth and ascorbic acid content of spinach (Spinacia oleracea cv. Shusiro). Plants were grown in a NFT (Nutrient Film Technique) system for 28 days after transplanting with fluorescent light (FL, control), LEDs and UVA (Blue+UVA (BUV), Red and Blue (R:B(2:1)) + UVA (RBUV), Red+UVA (RUV), White LED (W), Red and Blue (R:B(2:1)), Blue (B), Red (R)) under the same light intensity ($130{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and photoperiod (16/8h = day/night). All the light sources containing the R (R, RB, RUV, and RBUV) showed leaf epinasty symptom at 21 days after transplanting (DAT). Under the RUV treatment, the lengths of leaf and leaf petiole were significantly reduced and the leaf width was increased, lowering the leaf shape index, compared to the R treatment. Under the BUV, however, the lengths of leaf and leaf petiole were increased significantly, and the leaf number was increased compared to B. Under the RBUV treatment, the leaf length was significantly shorter than other treatments, while no significant difference between the RBUV and RB for the fresh and dry weights and leaf area. Dry weights at 28 days after transplanting were significantly higher in the R, RUV and BUV treatments than those in the W and FL. The leaf area was significantly higher under the BUV treatment. The ascorbic acid content of the 28 day-old spinach under the B was significantly higher, followed by the BUV, and significantly lower in FL and R. All the integrated data suggest that the BUV light seems to be the most suitable for growth and quality of hydroponically grown spinach in a plant factory.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.241-247
• /
• 2001

Boundary line method was adopted to analyze the relationships between rice yield and meteorological conditions during rice growing period. Boundary lines of yield responses to mean temperature($T_a$) and sunshine hour( $S_{h}$) and diurnal temperature range($T_r$) were well-fitted to hyperbolic functions of f($T_a$) =$$\beta$_{0t}$(1-EXP(-$$\beta$_{1t}$ $\times$ ($T_a$) ) and f( $S_{h}$)=$$\beta$_{0t}$((1-EXP($$\beta$_{1t}$$\times$ $S_{h}$)), to quadratic function of f($T_r$) =$\beta$$_{0r}$(1-($T_r$ 1r)$^2$), respectively. to take into account to, the sterility caused by low temperature during reproductive stage, cooling degree days [$T_c$ =$\Sigma$(20-$T_a$] for 30 days before heading were calculated. Boundary lines of yield responses to $T_c$ were fitted well to exponential function of f($T_c$) )=$\beta$$_{0c}$exp(-$$\beta$_{1c}$$\times$$T_c$ ). Excluding the constants of $\beta$$_{0s}$ from the boundary line functions, formed are the relative function values in the range of 0 to 1. And these were used as yield indices of the meteorological elements which indicate the degree of influence on rice yield. Assuming that the meteorological elements act multiplicatively and independently from each other, meteorological yield index (MIY) was calculated by the geometric mean of indices for each meteorological elements. MIY in each growth period showed good linear relationship with rice yield. The MIY's during 31 to 45 days after transplanting(DAT) in vegetative stage, during 30 to 16 days before heading (DBH) in reproductive stage and during 20 days after heading (DAH) in ripening stage showed greater explainablity for yield variation in each growth stage. MIY for the whole growth period was calculated by the following three methods of geometric mean of the indices for vegetative stage (MIVG), reproductive stage (HIRG) and ripening stage (HIRS). MI $Y_{I}$ was calculated by the geometric mean of meteorological indices showing the highest determination coefficient n each growth stage of rice. That is, (equation omitted) was calculated by the geometric mean of all the MIY's for all the growth periods devided into 15 to 20 days intervals from transplanting to 40 DAH. MI $Y_{III}$ was calculated by the geometric mean of MIY's for 45 days of vegetative stage (MIV $G_{0-45}$ ), 30 days of reproductive stage (MIR $G_{30-0}$) and 40 days of ripening stage (MIR $S_{0-40}$). MI $Y_{I}$, MI $Y_{II}$ and MI $Y_{III}$ showed good linear relationships with grain yield, the coefficients of determination being 0.651, 0.670 and 0.613, respectively.and 0.613, respectively.