• Journal of Ginseng Research
• /
• v.15 no.3
• /
• pp.171-178
• /
• 1991

The results ok feeding experiments to the mice with ginseng extract, ginseng Powder, and ADAPTAGEN, for 30 days before X-ray irradiation and for 40 days after the X-ray irradiation at 750 rads were as follow: 1. The 50% lethals days (LD50, ) by the X-ray irradiation were 9 days at 1, 000 rads. 10 days at 900 rads, 11 days at 800 rads, 14 days at 760 rads, and 19 darts at 750 rads. Therefore, the standard radiation dose was set at 750 radb/8 min. 2. The 80% of the control group mice exposed to the X-ray radiation without ginseng feeding died in periods ranging from 14 to 24 days and the 20~30% of the ginseng extract and ginseng powder feeding groups died. But the 100% of the mice fed with ADAPTAGEN survived. 3. Testicles of the control group became smaller in weight than the nomad group by 26.5 to 29.0% and those of the ginseng extract and ginseng powder feeding group reduced by 44.6 to 60.4%. However, testicles of the ADAPTiIGEN feeding group increased in size by 77.4% to 87.1% and in weight by 61%, showing a recovery phenomenon approarhing to those of the ordinary mice. The ADAPTAGEN feeding group mice were also as active in color as the ordinary ones. 4. An electron micrograph(X8, 000X2.2) of the liver cells of the mice which had been 40 days after X-ray irradiation showed as follows; The control group appeared that is physiological action stopped due to the frequent occurrence of morphological change of the nucleus and diffusion of chromosome, reduction in microspores and expansion of microsomts, and endoplasmic change of mitochondria. The liver cells or the ADAPTAGEN feeding group were in a state similar to those of the ordinary mice restoring to normalcy In contrast, the liver cells of the ginseng extract and ginseng powder feeding groups were still far from being normal. 5. A serological analysis showed that the control group sharply decreased in albumin, Y-g1obu1in, and IgG so far as to cause dystrophy and to weaken antibody resistance but that ginseng extract and ginseng powder feeding groups, though in a little more restoring state than the control group, were still far from the normal group. The ADAPTAGEN feeding group restored to a state as comparable to the normal group in the contents of albumin ${\gamma}$-globulin, IgG and serum protein. In order words, it is noteworthy that ADAPTAGEN feeding was effective in revitalizing the destroyed cells of a living body and that it has the function of normalizing antibody components.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.407-412
• /
• 2005

This study is to establish the pattern for one piece dress which fits well to the women somatotype with different drop value and is functional and has high body fitness. Selected 2 testers from classified 4 types who were close to the average value and took twice dressing test. After successive correction and revision, patterns of one piece dress for each somatotype were established. M type ; Bust line is established to B/4+1.7 cm. Waist line is W/4+1.5+2.5 cm(dart amount) for front pattern and W/4+0.8+2 cm(dart amount) for back. Hip line is H/4+0.8 cm for front and H/4+0.8 cm for back and the bust dart amount is 2.5 cm. A type ; Bust line is established to B/4+1.7 cm. Waist line is W/4+1.5+2.5 cm (dart amount) for front pattern and W/4+0.8+2 cm(dart amount) for back. Hip line is H/4+1.5 cm for front and H/4+1 cm for back and the bust dart amount is 2.2 cm. X type ; Bust line is established to B/4+1.5 cm for front pattern and B/4+2 cm for back. Waist line is W/4+2+2.5 cm (dart amount) for front and W/4+1+2+1.4 cm(for two darts amount) for back. Hip line is H/4+1 cm for front and H/4+1.3cm for back and the bust dart amount is 2.8 cm. H type; Bust line is established to B/4+1.5 cm for front pattern and B/4+2cm for back. Waist line is W/4+1.7+2.5 cm (dart amount) for front and W/4+0.8+2 cm(dart amount) for back. Hip line is H/4+2 cm for front and H/4+1.5 cm for back and the bust dart amount is 2.8 cm. In order to achieve the objective evaluation on a new pattern in this study, the sensory evaluation for both Imwonja pattern and a new pattern in this study was completed. As a result of sensory evaluation, a new pattern of this study could accomplished a good appearance in reflecting characteristics of each types and could achieved the functional superiority than comparison pattern.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1825-1836
• /
• 2008

Many applications in computer graphics require complex and highly detailed models. However it is often desirable to use approximations in place of excessively detailed models in order to control the processing time. Thus, we aim to develop a notion of optimal matrix to simplify surface which can rapidly obtain the high quality 2D patterns flattening 3D surface as follows. Firstly, two 3D bodies are modeled based on existing Size Korea data. Secondly, each model is divided by shell and block for its pattern draft. Thirdly, each block is flattened by grid and bridge method. Finally, we selected the optimal matrix and demonstrated the efficiency and quality of the proposed method. This proposed approach accommodates surfaces with darts, which are commonly used in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. It is expected that this method could facilitate much better approximation in both efficiency and precision.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.136-145
• /
• 2012

This research proposes a pattern making method for women's bodice by the characters of body types and develops bodice dress forms on their body shapes applying 3D body scan data. 515 women's body scan data was collected and analyzed factor and cluster analysis. Three body types were characterized in normal, obese, and slim group. In each group, 10 subjects were selected. 20 parts in 3D anthropometric data were measured using Autocad program. The amount of waist dart was calculated and three types of basic bodice pattern were developed using the calculated darts data. The amount and the position of front dart and side dart were different at obese group in comparison of normal and thin group. The three types of basic bodice model were made by the basic bodice pattern, and each model was scanned by 3D scanner to make 3D bodice dress forms. Three types of bodice dress forms were rendered using 3D max program. Bodice dress forms had the dart lines and were useful to draft patterns to fit their body shape.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.95-107
• /
• 2022

This study attempted to develop a bodice prototype suitable for the 20's obese male's trunk with a BMI of 25kg/m² or more, which is distinguished from the standard body type. Through this, it was intended to provide data to help the development of clothing for obese males. Patterns such as front bodice shoulder line and front sagging were modified through primary appearance and garment pressure evaluation. Through the second evaluation, corrections such as back armhole, back waistline, and front sagging were performed. Through the third evaluation, the final pattern drafting method was developed by removing the front sagging added through the second evaluation. In the case of obese male body types in their 20s, a drafting method distinguished from the standard body type was required in the method of setting the front and back waist lines, back armhole darts, and front shoulder lines due to protruding and posture of the abdomen. This study was meaningful in that it presented a bodice prototype drafting method suitable for the 20s obese males. In the follow-up study, it is thought that actual clothing experiments and studies to develop clothing patterns by applying them to obese male tops in their 20s should be conducted.

• Journal of Embryo Transfer
• /
• v.16 no.3
• /
• pp.213-221
• /
• 2001

This study was conducted to examine in vitro developmental ability of porcine embryos after somatic cell nuclear transfer. The porcine ear fell was cultured in vitro for confluency in serum-starvation condition(TCM-199 + 0.5% FBS) far 3~6 days of cell confluency. The zona pellucida of IVM oocytes were partially drilled using laser system. Single somatic cell was individually transferred into enucleated oocytes. And the reconstructed embryos were electrically fused(single DC 1.9kv/cm, 30$\mu$ sec) with 0.3M mannitol. After electrofusion, embryos were activated(single AC 5v/mm, 5sec) and cultured in HCSU-23 medium containing 10% FBS at 39$^{\circ}C$, 5% $CO_2$ in air for 6 to 8 days. The fusion rate of donor cells was 45.6, 36.8 and 46.1% in 3~4, 5~6 days of serum starvation and non serum starvation(N-S), and were 52.7. 53.0 and 51.7% in 1~2. 5~6 and 13~14 passages of donor cell culture, respectively. No significant difference was found in the fusion rate of donor cells by the duration of serum starvation treatment or the number of donor cell passages. By the size of donor cells, however, the fusion rate was significantly higher(P<0.05) for reconstructed embryos derived from 25r $\mu$m $\geq$ site of donor cells (65.3%) than that of 25~30$\mu$ m(42.5%) or 30$\mu$ m(45.5%)$\leq$ cells. The cleavage rate was significantly (P<0.05) higher in 3~4 darts of serum starvation treatment(67.1%) than that in N-S (50.7%) or 5~6 days of starvation(57.1%). The activation rate by the size of donor cells in fused oocytes was 56.5, 68.8 and 58.5%, respectively, and was not significant.