• Journal of Korea Foundry Society
• /
• v.19 no.6
• /
• pp.493-500
• /
• 1999

Squeeze casting was used for fabricating a light metal base composite having high strength and wearresistance. Reactive sintering was used to prepare the preform of Squeeze casting. To utilize Fe-Al intermetallic compounds and SiC particle as a reinforcement, there needs to prepare Fe-Al mixed powder at 50, 60, 70at.%Al, and add SiC powder to the above mixture at 4, 7, 16, 24wt.%. The prepared mixture with SiC was reactive sintered in a tube furnace at $660^{\circ}C$ to get a porous hybrid preform of intermetallic compound and SiC. The preform prepared above was placed in a metal mold, preheated at $660^{\circ}C$ AC4C matrix was injected into the mold with the temperature of the melt at $610^{\circ}C$ After these processes, 66MPa was applied to the mold for 5 minute to finish the whole procedure. The maximum reaction temperature was increased with the increased Al amount, but decreased with the increased SiC amount. The density of the preform was decreased with SiC amount increase in the compacts due to swelling of the preform. An optical microscope was applied to observe the micro structure and the dispersion of the reinforcements. To analyze phases, We utilized XRD, EDS. Hardness test were chosen to get the information of mechanical properties. There were no significant changes in micro structure between the composite and preform. However, it was shown that uniform dispersion of the reinforcers and complete infiltration of the melt into the preform were achieved through the procedure of the squeeze casting. It was observed that the hardness of the composite is decreased with increased SiC amount, resulting from the volumetric expansion of the preform.

• Journal of Korea Foundry Society
• /
• v.24 no.6
• /
• pp.356-365
• /
• 2004

Mechanical properties and microstructures of the Ni-AI-Fe and Ni-AI-Fe-(B, Zr) alloys which containing $10{\sim}30at$.%Fe, 0.1at.%B and/or 0.1at.%Zr have been investigated. The experimental results showed that the microstructures of Ni25Al were changed from a single phase ${\gamma}$ to dual phase ${\gamma}$ and ${\beta}$ by addition of 27at.%Fe. Ni45Al, however, kept the single ${\beta}$ phase even though Fe was added upto 30at.%. The hardness of Ni25Al were increased from $H_RB$ 70 to $H_RC$ 39 by addition of 27at.%Fe. In the case of Ni45Al which have $H_RC$ 37, the hardness was decreased by lOat.%Fe addition, but increased with 30at.%Fe. The yield strength and ultimate compressive strength in the compressive test have showed a similar trend with the hardness change. The strain to fracture was 14% at maximum and achieved in Ni25Al-27at.%Fe and Ni25Al-27at.%Fe-0.1 at.%B alloys. The Ni45Al showed a relatively low strain to fracture as 4%. The impact absorption energy of Ni25Al increased from 0.74 kg-m to 1.81 kg-m by addition of 27at.%Fe. In case of Ni45Al, the addition of lOat.%Fe and lOat.%Fe with small amounts of Band Zr did not change significantly the impact absorption energy of 0.60 kg-m, whereas the addition of 30at.%Fe with small amounts of B and Zr increased it slightly. In fracture tests, both of two basic materials showed the same intergranular fracture but by adding Fe it changed to the cleavage fracture mode or co-existing of cleavage and intergranular fractures.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.492-502
• /
• 2002

The dapped ends of the Gerber's beam were designed by PCI(Prestressed Concrete Institute) and CPCI(Canadian Prestressed Concrete Institute) methods. The depths of nibs with precast and topping concrete, which were halves of the total beam depth, were 77 cm md 18.2 cm, respectably. Shear tests were performed on four full scale beam ends. All specimens designed by PCI and CPCI methods showed crackings at the re-entrant coner of dap before the 32 ％ of full service design loading, and failed at the load level higher than their design strength but less than their calculated nominal strength. The specimens with increased hanger reinforcement show more effective in development of initial crackings, more ductile in failure with distributed crackings, and failed in higher strength than those of PCI requirement. The tested specimens designed by CPCI method were more ductile in failure than those of the PCI methods.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.95-98
• /
• 2013

The photoluminescence (PT) properties of Al-doped ZnO thin films grown by the sol-gel dip-coating method have been investigated. At 12 K, nine distinct PL peaks were observed at 2.037, 2.592, 2.832, 3.027, 3.177, 3.216, 3.260, 3.303, and 3.354 eV. The deep-level emissions (2.037, 2.592, 2.832, and 3.027 eV) were attributed to native defects. The near-band-edge (NBE) emission peaks at 3.354, 3.303, 3.260, 3.216, and 3.177 eV were attributed to the emission of the neutral-donor-bound excitons ($D^0X$), two-electron satellite (TES), free-to-neutral-acceptors (e,$A^0$), donor-acceptor pairs (DAP), and second-order longitudinal optical (2LO) phonon replicas of the TES (TES-2LO), respectively. According to Haynes' empirical rule, we calculated the energy of a free exciton (FX) to be 3.374 eV. The thermal activation energy for $D^0X$ in the nanocrystalline ZnO thin film was found to be ~25 meV, corresponding to the thermal dissociation energy required for $D^0X$ transitions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.339-345
• /
• 1988

Four actinomycetes which produces extracellular chitinase were isolated from soil and organic matter all over the Chonnam provincial area. The chemical composition, morphological, cultural and physiological properties of isolated strain S-25, S-42, S-172 and S-267 were studied in relation to the toxonomical properties. All of strains contained phospholipids such as phosphatidyl ethanolamine, phosphatidyl inositol and diphosphatidyl glycerol. The components of cell wall in all strains have L, L-DAP, Glutamic acid, Alanine, Glycine and Glucosamine. The surface of spore is smooth and colony is grey in all strains, Based on the results obtained in these experiments all of strains are identified as Streptomyces sp.S-25, Streptomyces sp.S-42, Streptomyces sp.S-l72 and Streptomyces sp. S-267.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.451-457
• /
• 2021

Recently, the number of interventional procedures has increased dramatically as an alternative of invasive surgical procedure and patient radiation exposure is also increasing accordingly. In this study, we evaluated the patient dose of major interventional procedures nationwide and we established our Korean database. With these results, we tried to suggest the reference dose level for major interventional procedures. We evaluated patent dose data in the field of interventional radiology from foreign countries. Measurement of radiation dose exposure for 11 major interventional procedures was conducted using embedded DAP meters in 10,006 patients from 47 hospitals, and reference level of each interventional procedure was suggested. The DRLs of each intervenional procedure are as follows: TACE 206(Gy·cm²), AVF 12(Gy·cm²), LE intervention 43(Gy·cm²), TFCA 122(Gy·cm²), Cerebral aneurysm coil embolization 214(Gy·cm²), PTBD 22(Gy·cm²), Biliary stent 60(Gy·cm²), PCN 7(Gy·cm²), Hickman catheter 2.1(Gy·cm²), Chemoport 1.4(Gy·cm²), BAE 104(Gy·cm²). Compared with the previously established DRL in 2012, the radiation dose decreased in all 10 interventional procedures. In the future, continuous publicity and education on the radiation dose reduction will be needed.

• Molecules and Cells
• /
• v.44 no.7
• /
• pp.517-528
• /
• 2021

A recent genetic study with Brucella abortus revealed the secretion activator gene A (SagA) as an autolysin component creating pores in the peptidoglycan (PGN) layer for the type IV secretion system (T4SS) and peptidoglycan hydrolase inhibitor A (PhiA) as an inhibitor of SagA. In this study, we determined the crystal structures of both SagA and PhiA. Notably, the SagA structure contained a PGN fragment in a space between the N- and C-terminal domains, showing the substrate-dependent hinge motion of the domains. The purified SagA fully hydrolyzed the meso-diaminopimelic acid (DAP)-type PGN, showing a higher activity than hen egg-white lysozyme. The PhiA protein exhibiting tetrameric assembly failed to inhibit SagA activity in our experiments. Our findings provide implications for the molecular basis of the SagA-PhiA system of B. abortus. The development of inhibitors of SagA would further contribute to controlling brucellosis by attenuating the function of T4SS, the major virulence factor of Brucella.

• Plant Breeding and Biotechnology
• /
• v.6 no.4
• /
• pp.337-353
• /
• 2018

We used Illumina/HiSeq sequencing for analysis of gene expression profiling among four maize seed types (dent, CM3 and CM6; waxy, CM5 and CM19) at 10 DAP (days after pollination). A total of 88,993,000 (CM3), 103,817,340 (CM6), 103,139,640 (CM5), and 66,978,958 (CM19) sequence reads were generated with read lengths of about 0.9, 1.0, 1.0, and 0.7 billion bp, respectively. We obtained 69.1 (CM3), 71.0 (CM6), 71.2 (CM5), and 71.8% (CM19) high quality reads from the raw data and compared them with reference RNA sequences in a public DB (NCBI). It was revealed that mapped reads were 58%, 63%, 62%, and 62% of the EST reference in CM3, CM6, CM5 and CM19, respectively; and more than 51,000 genes were expressed based on RPKM criteria (over 0.25 value) in each CM3, CM6, CM5, and CM19 inbred line. In differentially expressed gene (DEG) analysis, we found that 3,527 genes were differentially expressed by at least two-fold with 1,709 upregulated in the two waxy inbred lines and 1,818 upregulated in the two dent inbred lines. We also detected genes for the sucrose and starch biosynthesis pathways based on BINs, and different expression patterns between waxy and dent inbred lines were shown for the gene set for starch synthesis, such as sh2, bt2, du1, wx1, and ae1. Although some genes were more expressed in dent lines, most genes for starch synthesis were much expressed in waxy lines. Especially, there was greater expression of the sus2 gene in both waxy lines compared with the dent lines.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.931-936
• /
• 2020

This study was conducted to observe the changes in radiation exposure dose and image quality of pediatric patients according to the presence and size of the gonadal shield when using the AEC system. X-ray equipment was used to measure the radiation exposure dose in the abdominal and gonads of the pediatric phantom when no shielding body was used and when three different sizes of shielding body were used, and SNR and CNR were measured through the obtained images. As a result of the study, the radiation exposure dose to the gonads decreased in proportion to the size of the radiation shield, but the radiation exposure dose to the abdomen was rather increased, and the image quality did not change. It is recommended to use a shield with a size optimized for the age, weight, and body size of the pediatric patient so as not to be overexposed by the increased radiation due to the radiation shield due to the use of the AEC System. For this purpose, information about the pediatric patient with the nurse It is believed that exchange is necessary.

• Journal of Korea Trade
• /
• v.25 no.1
• /
• pp.203-219
• /
• 2021

Purpose - The purpose of this study is to review and analyzes the contract of carriage and delivery/transport document in light of the major changes made to the Incoterms^® 2020 rules forced into effect on January 1st, 2020. Design/methodology - This study analyzed responsibility for the loading and unloading of goods under the contract of carriage in Incoterms 2020^® rules forced into effect by the ICC from January 1, 2020, and what document must be presented as evidence of delivery by the seller. Findings - A review revealed that in Rule C, the costs of unloading at the place of destination are determined by the terms of the contract of carriage, and in the DAP and DDP rules, if the seller bears the unloading costs, such unloading costs cannot be recovered from the buyer. To settle this issue, the seller needs to make a contract of carriage by sea with the carrier on FI terms. Furthermore, in the case of containerized goods that the FCA should be used, FOB was misused because the seller could not present an on-board bill of lading in the L/C transaction. However, it was confirmed that in FCA, the parties can use an optional mechanism to issue an on-board bill of lading. Originality/value - Incoterms 2020^® rules are still widely used in international trade by parties to contract sales around the world, just like Incoterms 2010^® rules. This study attempts to reduce or eliminate disputes that may arise from interpretative misunderstandings between the parties in the contract of sales concluded by the seller and the buyer.