• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2000.11b
• /
• pp.43-48
• /
• 2000

This paper introduces MPEG-2 AAC codec system fur digital audio broadcasting. This system consists of encoder and decoder, and this system provides MPEG-2 system multiplexing and demultiplexing functions. Four DSPs are adopted fur encoder and three DSPs fur decoder. Each DSP processes system control, I/O control, and audio signal processing, multiplexing and demultiplexing. This paper also discusses about some near future estimations related to DAB system and services. And at the end of this paper describes about future development plans.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.122-139
• /
• 2015

Though the digital transition of terrestrial TV has been completed, the transmission system for terrestrial radio has not been determined and terrestrial radio still keeps its analog transmission. This study, under coorientation model, aims to explore the cognitive difference in recognizing important factors to be considered in deciding the digital radio transmission system between the employees of terrestrial broadcasters and then crucial issues related to the factors are driven. It has been found that the most big cognitive difference among the employees of three major terrestrial broadcasters lies in selecting frequency band for digital radio transmission. But there was little difference of opinion on simultaneous production-transmission, efficiency of frequency usage, broadcast quality and standards of service. The most disputable point in transition to digital radio broadcasting is selecting the frequency band for digital radio between the frequency bands used for FM radio broadcast (88-108MHz), terrestrial DMB (VHF Ch7~13) and FM radio adjacent broadcast band (76~88MHz: VHF Ch5~6). So, the question concludes into the selection issue between DAB+, HD-Radio, and DRM+. To improve the quality of radio broadcasting service and enhance the satisfaction of listeners, it is desirable to allow to operate both production system and transmission station, to enhance high transmission efficiency with minimum transmission facility, and to permit new entrance of broadcasters.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.670-681
• /
• 2019

Orthogonal frequency division multiplexing (OFDM) is a system which is used to encode data using multiple carriers instead of the traditional single carrier system. This method improves the spectral efficiency (optimum use of bandwidth). It also lessens the effect of fading and intersymbol interference (ISI). In 1995, digital audio broadcast (DAB) adopted OFDM as the first standard using OFDM. Later in 1997, it was adopted for digital video broadcast (DVB). Currently, it has been adopted for WiMAX and LTE standards. In this project, a Verilog design is employed to implement an OFDM transmitter (DAC block) and receiver (FFT and ADC block). Generally, OFDM uses FFT and IFFT for modulation and demodulation. In this paper, 16-point FFT decimation-in-frequency (DIF) with the radix-2 algorithm and direct summation method have been analyzed. ADC and DAC in OFDM are used for conversion of the signal from analog to digital or vice-versa has also been analyzed. All the designs are simulated using Verilog on ModelSim simulator. The result generated from the FFT block after Verilog simulation has also been verified with MATLAB.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.229-232
• /
• 2000

Orthogonal frequency division multiplexing(OFDM) has meanwhile become part of several telecommunicati ons standards, such as satellite and terrestrial digital audio broadcasting(DAB), digital terrestrial TV broad casting(DVB), asymmetric digital subscriber line(ADSL) for high-bit-rate digital subscriber services on twisted-pair channels, and broadband indoor wireless systems. In his paper, we show that OFDM signals contain sufficient structure to accomplish blind channel estimation using second order statistics only. This method doesn't require redundancy as cp in transmitter. And the result is compared with PSAM channel estimation as least square, linear minimum mean square, singular value decomposition.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.179-180
• /
• 2008

본 논문에서는, 고품질 AT-DMB 시스템을 위해서 각 계층 ES(Elementary Stream)을 MPEG-4 over PEG-2 시스템과 Eureka-147 DAB 시스템을 통해 서로 다른 채널로 전송한다. 계층별 전송으로 인한 시간 지연에 대처하여 수신 입력부에서는 각각의 계층으로 전송된 ES들이 동기화 되어 복호화 되도록 SVC의 계층적 비트스트림 구조와 적응적으로 동작되는 다중화 시스템 구조를 제작하였다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.331-332
• /
• 2014

본 논문에서는 전기자동차 긴급구난용 이동식 충전시스템에 절연형 양방향 DC-DC 컨버터인 DAB(Dual Active Bridge) 컨버터를 적용하여 시스템 안정성 향상과 함께 출력주파수를 높임으로서 수동소자의 용량을 줄일 수 있고 고효율성을 확보할 수 있으며, 이에 대한 유효성을 시뮬레이션 해석을 통해 검증한다.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.289-291
• /
• 2007

The Digital Multimedia Broadcasting(DMB) system is developed to offer high quality audio-visual multimedia contents to the uses by the various portable terminals in the mobile environment. Integrated complex reception platform is required to receive multimedia broadcasting services transmitted from various transmission media. In this paper, we present the design and implementation technic for providing the both of terrestrial and satellite DMB services simultaneously using the same hardware platform. The implemented complex receiving terminal to accommodate these DMB services simultaneously need composed of it RF module. it baseband module, it complex control module and the complex de-multiplexer module. The complex control module is designed using uClinux operating system. The complex de-multiplexer, which perform the functions of the address decoder and each DMB stream de-multiplexer, is implemented. with FPGA device. The implemented platform is tested in a real environment and its performance is satisfied with required performance criteria.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.207-209
• /
• 2019

This paper proposes a grid-tied photovoltaic (PV) system, consisting of Voltage-fed dual-active-bridge (DAB) dc-dc converter with single phase inverter. The proposed converter allows a small dc-link capacitor, so that system reliability can be improved by replacing electrolytic capacitors with film capacitors. The double line frequency free maximum power point tracking (MPPT) is also realized in the proposed converter by using Ripple Correlation method. First of all, to eliminate the double line frequency ripple which influence the reduction of DC source capacitance, control is developed. Then, a designing of Current control in DQ frame is analyzed and to fulfill the international harmonics standards such as IEEE 519 and P1547, $3^{rd}$ harmonic in the grid is directly compensated by the feedforward terms generated by the PR controller with the grid current in stationary frame to achieve desire Total Harmonic Distortion (THD). 5-kW PV converter and inverter module with a small dc-link film capacitor was built in the laboratory with the proposed control and MPPT algorithm. Experimental results are given to validate the converter performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.499-509
• /
• 2005

The capacity of Satellite DMB(Digital Multimedia Broadcasting) system is limited mainly by the interference. So, to achieve the expected performance of Satellite DMB system and to minimize the interference from other Satellite DMB system, ACI(Adjacent Channel Interference) should be considered carefully. Satellite DMB system uses the Gap-filler for effective transmission in terrestrial environment, and the Gap-filler can use direct amplification or frequency conversion to satisfy the specific requirements. Therefore, amplified signal causes several effects on interference between System A(Eureka 147 DAB) and System E(ISDB : Integrated services Digital Broadcasting). In this paper, by using the outcome of system-level simulation considering the results of link-level simulation, we analyze the interferences between System A and System E under practical situation based on the exact parameters of ITU-R BO. 1130-4. We also propose the appropriate level of guard band and Cell Radius to optimize system capacity by adapting the spectrum mask given in the spec. and utilizing the interference analysis between System A and System E.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_1
• /
• pp.493-504
• /
• 2022

Recently, as interest in eco-friendliness grows, the supply of hybrid electric vehicles and pure electric vehicles (EVs) for improving fuel efficiency of automobiles is rapidly expanding. The average daily energy consumption of electric vehicles is less than 20 [%] of the total ESS capacity of the vehicle, and research on additional functions using the ESS of the vehicle is urgently needed to expand the supply of electric vehicles. V2H(Vehicle to Home), like V2G(Vehicle to Grid), includes the concept of cooperating with system stabilization using ESS of electric vehicles. In addition, it includes various operations that can realize home welfare, such as uninterrupted power supply in case of power outage at home, and power supply for home DC devices. Therefore, in order to expand the supply of eco-friendly electric vehicles, it is urgently required to develop a V2H system with various functions that can realize home welfare. In this paper, we propose a V2H system with a CLLC resonant converter and a non-isolated step-up converter that can solve different impedance and resonant frequencies depending on the power transfer direction. The proposed V2H system is 6 [kVA] applicable to 150-450 [V], the voltage range that can use the ESS voltage for electric vehicles, and is designed with a capacity that can handle instantaneous electricity use at home. In addition, in order to verify the feasibility, an experiment by Psim simulation and prototype production was performed.