• Title/Summary/Keyword: D8/17

Search Result 2,469, Processing Time 0.036 seconds

A High Data Rate, High Output Power 60 GHz OOK Modulator in 90 nm CMOS

  • Byeon, Chul Woo;Park, Chul Soon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.17 no.3
    • /
    • pp.341-346
    • /
    • 2017
  • In this paper, we present a 60 GHz on-off keying (OOK) modulator in a 90 nm CMOS. The modulator employs a current-reuse technique and a switching modulation for low DC power dissipation, high on/off isolation, and high data rate. The measured gain of the modulator, on/off isolation, and output 1-dB compression point is 9.1 dB, 24.3 dB, and 5.1 dBm, respectively, at 60 GHz. The modulator consumes power consumption of 18 mW, and is capable of handling data rates of 8 Gb/s at bit error rate of less than $10^{-6}$ for $231^{-1}$ PRBS over a distance of 10-cm with an OOK receiver module.

Association of Microsatellite Marker in FABP4 Gene with Marbling Score and Live Weight in Hanwoo

  • Lee, Seung-Hwan;Cho, Yong-Min;Kim, Hyeong-Cheol;Lim, Da-Jeong;Moon, Hee-Joo;Hong, Seong-Koo;Oh, Sung-Jong;Kim, Tae-Hun;Yoon, Du-Hak;Park, Eung-Woo
    • Journal of Animal Science and Technology
    • /
    • v.52 no.6
    • /
    • pp.475-480
    • /
    • 2010
  • The bovine fatty acid binding protein 4 (FABP4) plays an important role to uptake intracellular fatty acid. It has been previously reported as a positional candidate gene for marbling score in livestock. The re-sequencing of FABP4 gene detected a polymorphic AT repeated sequence in intron II of FABP4 gene. Allelic distribution for this microsatellite marker was examined in other cattle breeds. A total of 8 alleles were detected with diverse repeat units (14 to 21 AT repeat) in Hanwoo and 7 breeds. Of the 8 alleles, the predominant alleles were $[AT]_{16}$, $[AT]_{18}$ and $[AT]_{19}$ in the Hanwoo and 7 cattle breeds. The linear mixed model for genotypic effect (3237AT) on carcass traits showed a significant effect on marbling score (MAR P=0.025) and live weight (LWT; P=0.04) in the 583 Hanwoo cattle population. Live weight (LW) was highest in the homozygous $(AT)_{17}$ genotype ($557.5{\pm}6.94$) and lowest in the heterozygous $(AT)_{16/17}$ genotype ($521.7{\pm}7.70$). On the other hand, the homozygous $(AT)_{17}$ genotype ($3.0{\pm}0.15$) has the highest effect on marbling score and the lowest effect was in homozygous (AT)$_{18}$ genotype ($2.2{\pm}0.15$). The marbling score difference between both groups was 0.8 which is around two times higher than SNP genotype effect on marbling score in Limousin $\times$ Wagyu crosses.

Serially Concatenated Turbo Code/Turbo Equalizer Detection Method for High Density Optical Storage Channels (고밀도 광 기록 채널을 위한 터보 코드와 터보 등기화를 연접한 데이터 복호 방법)

  • 이준환;이재진
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.6B
    • /
    • pp.1068-1073
    • /
    • 2000
  • In this paper, we propose a serially concatenated turbo bode/turbo equalizer scheme for optical storage systems. Without modulation coding, a random data sequence is directly passed through the optical channel. In simulation, the channel includes jitter of 15% and AWGN. The densities of the channel are S=4.6 and S=7.0. The code rates of turbo code are 4/5, 8/9 and 16/17. All code rates, the bit error probability is less than 10-5 at 24dB when we and jitter of 15%.

  • PDF

Design of UWB CMOS Low Noise Amplifier Using Inductor Peaking Technique (인덕터 피킹기법을 이용한 초광대역 CMOS 저잡음 증폭기 설계)

  • Sung, Young-Kyu;Yoon, Kyung-Sik
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.1
    • /
    • pp.158-165
    • /
    • 2013
  • In this paper, a new circuit topology of an ultra-wideband (UWB) 3.1-10.6GHz CMOS low noise amplifier is presented. The proposed UWB low noise amplifier is designed utilizing RC feedback and LC filter networks which can provide good input impedance matching. In this design, the current-reused topology is adopted to reduce the power consumption and the inductor-peaking technique is applied for the purpose of bandwidth extension. The performance results of this UWB low noise amplifier simulated in $0.18-{\mu}m$ CMOS process technology exhibit a power gain of 14-14.9dB, an input matching of better than -10.8dB, gain flatness of 0.9dB, and a noise figure of 2.7-3.3dB in the frequency range of 3.1-10.6GHz. In addition, the input IP3 is -5dBm and the power consumption is 12.5mW.

Analysis of Myocardial Function Using Gated Myocardial SPET : Comparison of QGS, 4D-MSPECT Software and Echocardiography (게이트 심근관류 SPECT를 이용한 심기능 분석: 정량분석 소프트웨어 QGS, 4D-MSPECT 및 심초음파법의 비교)

  • Lee, Seok-Mo;Bae, Sang-Kyun
    • Nuclear Medicine and Molecular Imaging
    • /
    • v.42 no.6
    • /
    • pp.435-443
    • /
    • 2008
  • Purpose: Gated myocardial perfusion SPECT provides not only myocardial perfusion status but also various functional parameters of left ventricle. We compared left ventricular ejection fraction, end-diastolic volume, LV mass by cardiac SPECT using Quantitative Gated SPECT (QGS), 4D-MSPECT software and standard 2D-echocardiography. Materials and Methods: One hundred fourteen patients (male 51, female 63; 29-85 years old, mean $61.3\;{\pm}\;13.3$ years old) with normal perfusion status on Tc-99m tetrofosmin gated myocardial perfusion SPECT were analyzed retrospectively. Ejection fraction (LVEF), End-diastolic volume (LVED), LV mass (LVM) were calculated using QGS, 4D-MSPECT, and LVEF, LVM using 2D-echocardiography. Statistical analysis including Bland-Altman plot was performed using $MedCalc^{(R)}$ (MedCalc software, Mariakerke, Belgium). Results: The correlation of LVEF between methods was good: 0.95/0.96 (stress/rest) between QGS and 4D-MSPECT, 0.79 between QGS and echocardiography, 0.79 between 4D-MSPECT and echocardiography (p<0.001). Using Bland-Altman plot, the 95% confidence interval of agreement between QGS and 4D-MSPECT ranged from -12.7% to 7.3% / from -12.2% to 6.5% (stress/rest). The agreement between QGS and echocardiography, 4D-MSPECT and echocardiography ranged from -17.4% to 24.0%, and -14.8% to 27.0% respectively. The correlation of LVM between methods was also good: 0.95 between QGS and 4D-MSPECT, 0.76 between QGS and echocardiography, 0.73 between 4D-MSPECT and echocardiography (p<0.001). The 95% confidence interval of agreement between QGS and 4D-MSPECT ranged from -33.8g to 14.1g (stress/rest), The 95% confidence interval of agreement between QGS and echocardiography, 4D-MSPECT and echocardiography ranged from -148.7 g to 21.8. g, and -142.8 g to 35.5 g, respectively. Conclusion: There was a good correlation for LVEF, LVEO, LVM among methods (QGS, 4D-MSPECT, echocardiography), but the variance between methods was big. Therefore, the functional parameters by each method cannot be used interchangeably.

ITU-T SG17(보안) 국제표준화 동향

  • Oh, Heung-Ryong;Youm, Heung Youl
    • Review of KIISC
    • /
    • v.30 no.4
    • /
    • pp.7-16
    • /
    • 2020
  • 국제전기통신연합(ITU)은 UN 산하 정보통신기술에 대한 국제표준을 담당하고 있으며, 전기통신표준화부문(ITU-T), 전기통신개발부문(ITU-D), 그리고 전파통신 부문(ITU-R)으로 구성되어 있다[1]. ITU-T 산하에는 역할과 임무에 따라 11개의 연구반(SG, Study Group)을 구성하고 있으며, SG17(보안, 의장: 순천향대 염흥열 교수)에서 정보보호 국제표준을 담당하고 있다[2]. 본 논문에서는 최근에 개최된 SG17 국제회의(2019년 8월, 2020년 3월/5월)의 주요 결과 및 향후 전망에 대해 분석하고자 한다.

ITU-T SG17(보안) 국제표준화 동향

  • Oh, Heung-Ryong;Youm, Heung Youl
    • Review of KIISC
    • /
    • v.29 no.4
    • /
    • pp.5-11
    • /
    • 2019
  • 국제전기통신연합(ITU)은 UN 산하 정보통신기술에 대한 국제표준을 담당하고 있으며, 전기통신표준화부문(ITU-T), 전기통신개발부문(ITU-D), 그리고 전파통신 부문(ITU-R)으로 구성되어 있다. ITU-T는 역할과 임무에 따라 11개의 연구반(SG, Study Group)으로 구성되어 있고, 정보보호 국제표준은 ITU-T SG17(보안, 의장: 순천향대 염흥열 교수)에서 담당하고 있다. 본 논문에서는 스위스 제네바에서 개최된 SG17 국제회의(2018년 8월, 2019년 1월) 주요 결과 및 향후 전망에 대해 분석하고자 한다.

Acoustic Scattering Characteristis of the Individual Fish (어체의 초음파 산란특성에 관한 연구)

  • 신형일
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.27 no.1
    • /
    • pp.21-30
    • /
    • 1991
  • The estimation of the fish biomass density or the size of fish by means of the acoustic equipment is an important part in the quantitative assessment of fisheries resources. The precision of such estimates depend upon the target strength of fish and the accuracy to which the acoustic equipment has been calibrated. This paper examine the accuracy of the digital measurement system which is manufactured by way of trial in order to masure the target strength of fish, and calibrations of that system carry out with an ogive and a ellipsoid made of the aluminum and the epoxy, respectively. Furthermore, measurements of target strength for eight species of fish are made at 25, 50, 100 kHz. The accuracy of the digital measurement system is compared the theory with measurements on ogive and ellipsoid, and the agreement is reasonable. Result of establishments on the target strength to fish length and to fish weight regression obtained from the measurements are available to provide the methods of design for use in interpreting acoustic measurements of fish abundance on the experimented eight species.

  • PDF

Occurrence of Disease Caused by Cladobotryum varium on Flammulina velutipes in Korea (Cladobotryum varium에 의한 팽이버섯 흰곰팡이병(가칭) 발생)

  • Kim, Han-Kyoung;Seok, Soon-Ja;Kim, Gwang-Po;Moon, Byung-Ju;Terashita, Takao
    • The Korean Journal of Mycology
    • /
    • v.27 no.6 s.93
    • /
    • pp.415-419
    • /
    • 1999
  • Cladobotryum varium infects the fruitbody of Flammulina velutipes during its cultivation. In the early stage of infection, white mycelia of C. varium partially attacked young fruitbody and eventually killed whole fruitbody during fruitbodies development. White fungi pathogen isolated from F. velutipes cultivation farm were investigated in pathogenicity and morphological feautres. The pathogen was identified as Cladobotryum varium. In asexual stage, $2{\sim}4$ conidiophores formed, $8.5{\sim}10.0{\times}16.1{\sim}17.0\;{\mu}m$ long and conidiospores with single septum were shaped in chains, $32.8{\sim}50.4\;{\mu}m$ in size. Size of chlamydospores were $12.7{\sim}18.0{\times}17.7{\times}48.1\;{\mu}m$ with $1{\sim}4$ septa.

  • PDF

Study on 3D Reverse Engineering-based MEP Facility Management Improvement Method (3차원 역설계 기반 MEP 시설물 관리 작업 개선 방안 도출)

  • Kang, Tae-Wook;Kim, Ji-Eum;Jung, Taek-Sun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.8
    • /
    • pp.38-45
    • /
    • 2016
  • The objective of this research is to develop a method of improving MEP facility management based on 3D reverse engineering. Recently, 3D image scanning-based reverse engineering has been implemented in the fields of architecture, construction and (manufacturing). In the case where there are many objects and the MEP system is complicated, 3D reverse engineering is applied in semiconductor factories, because facility maintenance works cause the 2D drawing to be different from the original one. The 3D point cloud data obtained from 3D image scanning contains accurate data and can increase the efficiency of complicated MEP facility maintenance works. For this purpose, the present research studied the technology trends and analyzed the process of 3D reverse engineering. Based on the results, a method of improving MEP facility management is established and its effects described.