• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.219-226
• /
• 2000

In this paper, we design and implement a IF(intermediate frequency) module for WLL(wireless local loop) CDMA(code division multiple access) basestation. The implemented IF transceiver is consists of transmitter, receiver and local oscillator. The considered signal bandwidth is 10 MHz and the local carrier frequency is 40 MHz. As test results, the If transmitter output power is -5dBm $\pm3dB$when the baseband input is -10dBm $\pm3dB$, and the IF receiver output power is -10dBm $\pm3dB$when the IF input is -5dBm $\pm3dB$. Also the AGC(automatic gain control) circuit has dynamic range of 9 dB from -7dBm to +2dBm with output power 2dBm. And the group delay characteristic is analyzed by comparing the phase delay from 1 MHz to 5 MHz and the phase distortion is very low. We can conclude that this IF system can be applied to high speed data rate communication system.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.39-46
• /
• 1998

In the FDMA and TDMA Cellular Systems, call blocking rise when frewquence slots andtime slots are used to ther users. Otherwise, in the CDMA cellular systems, call locking arises when interference level is above 10dB according to call of other users. System capacity is defined to be Erlang capacity that is the number of users when CDMA blocking probability is 1% or 2%. Users number corresponded channel number of AMPS and TDMA cellular systems. In this paper, we proposed new reuse-fraction using square of interference poser and obtained Erlang capacity for reverse link of CDMA cellular system with bit rate $R_{b}$, 9.6kbps and 14.4kbps. As a results, Erlange capacity of CDMA system have more 20.7 and 5.5 times than AMPS and TDMA system and have more form 1 to 4 Erlang thatn Viterbi and Padovani obtaned.d.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1267-1271
• /
• 2009

In this paper, a diplexer circuit to separate GSM from CDMA band is designed using a LTCC (Low Temperature Cofired Ceramic) multi-layer technology. In order to increase a integration capability of the diplexer, it is designed using 3-dimensional (3-D) multi-layer compact inductor and capacitors in e-layer LTCC substrate with a relative dielectric constant of 7. In order to achieve high selectivity of the bands, a shunt capacitor and inductor are designed in the high-pass filter (HPF) and low-pass filter (LPF), respectively. The size of the fabricated diplexer including CPW pads is 3,450 ${\times}$4,000 ${\times}$694 ${\mu}m^3$An insertion loss (IL) and return loss in GSM band are less than -1.35dB and more than -5.66dB,respectively. In the case of CDMA band, the IL of -1.54dBandRLof above -9.30dBare archived.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1011-1016
• /
• 2003

In this paper, we investigate the relationship between the intermodulation signal of 2-tone and CDMA spurious emission of HPA. And confirm that the fifth IMD signal of HPA has more important effect upon CDMA ACPR characteristics than the third IMD signal. We present the method for the power amplifier to satisfy the 2-tone and CDMA specification simultaneously, and that is to use the predistorter for improving the third IMD signal of 2-tone for the power amplifier which is tuned to satisfy the CDMA specification and not to satisfy the 2-tone specification. The result by using the method which is presented from this paper shows that the ACPR is improved about 2 dB for CDMA 1FA(frequency allocation) signal and the third IMD signal is improved about 20 dB for CW 2-tone signals and we confirmed the specification is satisfied simultaneously.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.17-24
• /
• 2006

The optical feedforward is known as a complicated technique in spite of its superior linearization. Here we optimized the feedforward circuit parameters using a systematic approach for optimum efficiency. A systematic approach was verified by transmission experiments of 2.14 GHz two tones. The compared third order IMD was enhanced by 38 dB for two-tone case. The experimental results for transmission of W-CDMA signals were described. The ACPR was enhanced by 20 dB for 1 W-CDMA carrier and by 16 dB for 3 W-CDMA carriers. Also, noise level was reduced by 7 dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.183-187
• /
• 2000

In this paper, the performance of DS-CDMA system and FH-CDMA system has been comparision analyzed in a channel environment which is characterized by Multi-User environment and Rayleigh fading environment. The techniques of improvement of the performance has been comperision analysis evaluated when adopting MRC diversity techniques. In same condition, We are analyzed the BER(Bit Error Rate) as increase Use's number due to comparing performance of two systems by Same communication band(300KHz), jamming signal(JSR) 10∼20dB, user data-rate 300bps. In the result, the performance of DS and FH systems in multiuser and Rayleigh fading environment is improved performance when adopting MRC diversity techniques. Especially DS system has been improved performance about 9.5 times than FH system when adopting MRC diversity techniques.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.32-39
• /
• 1998

Remez exchange algorithm was applied to realize an IF SAW filter for CDMA cellular phone systems. A SAW filter with withdrawal weighted transducers was simulated and then fabricated on 42.75.deg. ST-cut Quaritz wafer. Excellent agreement wasobtained between calculated andmeasured responses. Fabricated SAWfilterswere mounted on ceramic SMD package for reducing their size and volume. SAW filters were measured under matched circuit. As a result, 5 dB bandwidth of 1.32 MHz, 33dB bandwidth of 1.76 MHz, insertion loss of 13.8 dB and peak to peak ripple at passband of 0.26 dB were obtained. Linear group delay responses at passband were also obtained. These characteristics were good for practical use of IF SAW filter for CDMA system.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.175-178
• /
• 2000

본 연구에서는 CDMA단말기용 Receiver MMIC를 설계하였다. 전체회로는 저잡음 증폭기, 하향 주파수 혼합기 그리고 중간주파수 증폭기로 구성된다. 또한 문턱전압과 전원전압의 변화에 대해 회로의 안정성을 높이는 바이어스 보상회로를 추가하였다. 설계시 높은 선형성과 저잡음 특성을 가지도록 토폴리기를 구성하였고 설계 결과 전체 이득은 28.5dB, 저잡음 증폭기의 입력IP3는 8dBm, 하향주파수 혼합기의 입력 IP3는 0dBm이며 전체회로의 소모전류는 22.1mA이다. 레이아웃된 전체회로의 크기는 1.4$\times$1.4 [$\textrm{mm}^2$] 이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.871-881
• /
• 2001

In this paper, the effect of soft handoff technique on CDMA cell coverage is analyzed in a lognormally shadowed channel, which uses the Hata propagation model, Also, the rate of increase for the cell coverage is analyzed by calculating the hard and soft handoff margin. When the outage probability is 0.02 and the standard deviation of the received signal is 2.5 dB in a lognormally shadowed channel, the transmit power of the mobile station which is located in the cell boundary is increased by the hard handoff margin of 5.13 dB and by the soft handoff margin of 3.68 dB, respectively. So, the rate of increase for the cell coverage is 1.39 in case of using the soft handoff technique. It is shown that if the (E$\_$b//N$\_$0/)$\_$req/ value is 7 dB, the cell coverage of the CDMA cellular system with soft handoff technique in city area is 3.33 km in case of the 850 MHz frequency and 1.36 km in case of the 1900 MHz frequency. Also, the accurate cell coverage with soft handoff technique is supported that could be serviced by the base-station in CDMA cellular system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.2
• /
• pp.47-55
• /
• 2003

In this paper, the performance of DS-CDMA system with smart antenna is analyzed for different bandwidths (1.25MHz,5MHz) and different channel environments (rural, urban) in wideband multipath channel. For the analysis of smart antenna system, the vector channel having the spatio-temporal correlation is modeled as a time-variant linear filter in time, and each multipath is assumed as a reflective wave from only one direction (only one cluster) in space. Several multipath is within one chip are distingushed into each one and the strongest signal is selected, DS-CDMA system with smart antenna using wider bandwidth present better performance than that using narrow bandwidth. It is shown that the smart antenna is more effective in urban area when using 2D-RAKE receiver.