• Mass Spectrometry Letters
• /
• v.3 no.2
• /
• pp.43-46
• /
• 2012

In this study, comprehensive two dimension gas chromatography (2D GC-MS) and 15 T Fourier transform ion cyclotron resonance mass spectrometry (15T FT-ICR MS) connected to atmospheric pressure photo ionization (APPI) have been combined to obtain detailed chemical composition of a diesel oil sample. With 2D GC-MS, compounds with aliphatic alkyl, saturated cyclic ring(s), and one aromatic ring structures were mainly identified. Sensitivity toward aromatic compounds with more than two aromatic rings was low with 2D GC-MS. In contrast, aromatic compounds containing up to four benzene rings were identified by APPI FT-ICR MS. Relatively smaller abundance of cyclic ring compounds were found but no aliphatic alkyl compounds were observed by APPI FT-ICR MS. The data presented in this study clearly shows that 2D GC-MS and 15T FT-ICR MS provides different aspect of an oil sample and hence they have to be considered as complementary techniques to each other for more complete understanding of oil samples.

• Journal of Korean Institute of Industrial Engineers
• /
• v.43 no.1
• /
• pp.49-61
• /
• 2017

This paper proposes an R&D project selection methodology for green technology centered on developing country-oriented technology commercialization. Eight selection criteria are derived from the R&BD logic model : technology needs of developing countries, effectiveness of green technology, technological potentials, domestic technological capability, commercialization feasibility, economic benefits, business feasibility, and spillover effects of developing countries. 21 qualitative and quantitative indicators are then defined for each criterion. The analytic hierarchy process is conducted to produce relative importance of evaluation indicators and to set final priority scores of R&D project candidates. The working of the proposed methodology is provided with the help of a case study example of Green Technology Center. The proposed methodology is expected to be effectively utilized for policy practices of R&D project selection in the field of green technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.460-465
• /
• 2007

In this paper, the pipelined A/D converter with multi S/H stage structure is proposed for high resolution and high-speed data conversion rate. In order to improve a resolution and operational speed, the proposed structure increased the sampling time that is sampled input signal. In order to verify the operation characteristics 20MS/s pipelined A/D converter is designed with two S/H stage. The simulation result shows that INL and DNL are $0.52LSB{\sim}-0.63LSB$ and $0.53LSB{\sim}-0.56LSB$, respectively. Also, the designed Analog-to-Digital converter has the SNR of 43dB and power consumption is 18.5mW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.55-62
• /
• 2000

In this paper, cellularphone antenna was designed to be capable of being mounted on the circuit-board with co-planar feeding method. The designed antenna is fabricated by the following procedure : make the multi-layered dielectric ceramic($\varepsilon_{\tau}$=23) hexahedron($7.5mm\times4.5mm\times0.4mm$) and then produce λ/4 monopole radiation element with helical structure on the surface of the hexahedron. The results are as followings : Returnloss 27.36 dB, -10 dB bandwidth 76 MHz(3.97 %), H-plane average gain -9.43 dBd.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.2
• /
• pp.233-253
• /
• 2024

This study analyzed differences between three-dimensional (3D) body scanning and manual measurements, aiming to assess whether 3D scanning can replace traditional anthropometric tools, such as tape measures and calipers. Data from 4,478 participants in the 8th Size Korea Project were analyzed, covering 43 measurement items. Since Given that the 3D and manual measurements were performed on the same subjects in the 8th Size Korea Project, it was possible to determine the correlation more accurately between the two measurement methods more accurately. Using Applying ISO 20685-1(2018) standards, 15 out of the 43 items fell within allowable error limits. When classified into six types, "small circumferences" and "segment lengths" showed averages of 3.35 mm and 3.10 mm, respectively, within acceptable range. "Body heights" and "body depths" slightly exceeded the limit, with averages of 5.28 mm and 6.58 mm. "Body widths" and "large circumferences" surpassed the limit, with means of 16.77 mm and 16.18 mm. The study offers an objective basis to for validate validating 3D measurements' measurements' reliability and accuracy, addressing various industries' needs for information on the human body's dimensions information.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1991.10a
• /
• pp.42-43
• /
• 1991

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1995.10a
• /
• pp.42-43
• /
• 1995

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.3
• /
• pp.166-175
• /
• 2024

In this paper, the Window-Masking Method and HAT (Hardware Attached Top) CPU SoM (System on Module) are used to improve the performance and reduce the weight of the MANET (Mobile Ad-hoc Network) network synchronization system using time division redundancy. We propose converting it into a RISC-V based soft-core MCU and mounting it on an FPGA, a hardware accelerator. It was also verified through experiment. In terms of performance, by applying the proposed technique, the synchronization acquisition range is from -50dBm to +10dBm to -60dBm to +10dBm, the lowest input level for synchronization is increased by 20% from -50dBm to -60dBm, and the detection delay (Latency) is 220ns. Reduced by 43% to 125ns. In terms of weight reduction, computing resources (48%), size (33%), and weight (27%) were reduced by an average of 36% by replacing with soft-core MCU.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.43-49
• /
• 2018

Computer simulation was performed using the SIMION program to develop an electron gun for MCP cleaning. The target, MCP, is located 180mm from the source of the electron gun, and the diameter of the MCP is approximately 20mm. Therefore, we tried to find the condition that the beam diameter of electrons reaching the MCP is to be 20mm using four variables such as E, ${\phi}$, d1, d2, where the E is the energy of the electron reaching the MCP, the ${\phi}$ is the diameter of the extractor, and the d1 and the d2 are the distance from the electron source to the end of the extractor tube, and to the wall of chamber, respectively. As a result of simulation, we figuried out that the E and the d2 have little effect on the beam diameter. On the other hand, we also found that the beam diameters were very sensitive to the d1 and varied relatively large with respect to the ${\phi}$, and the d1 was the secondary order function of the ${\phi}$. Therefore we found that this function will allow us to design electron guns that are suitable for the purposes of this study.

• Journal of radiological science and technology
• /
• v.43 no.6
• /
• pp.453-460
• /
• 2020

The price of the Brain phantom (Hoffman 3D brain phantom) used in nuclear medicine is quite expensive, it is difficult to be purchased by a medical institution or an educational institution. Therefore, the purpose of present research is to produce a low-price 3D brain phantom and evaluate its usefulness by using a 3D printer capable of producing 3D structures. The New 3D brain phantom consisted of 36 slices 0.7 mm thick and 58 slices 1.5 mm thick. A 0.7 mm thick slice was placed between 1. 5 mm thick slices to produce a composite slice. ROI was set at the gray matter and white matter scanned with CT to measure and compare the HU, in order to verify the similarity between PLA which was used as the material for the New 3D brain phantom and acrylic which was used as the material for Hoffman 3D brain phantom. As a result of measuring the volume of each Phantom, the error rate was 3.2% and there was no difference in the signal intensity in five areas. However, there was a significant difference in the average values of HU which was measured at the gray and white matter to verify the similarity between PLA and acrylic. By reproducing the previous Hoffman 3D brain phantom with a 100 times less cost, I hope this research could contribute to be used as the fundamental data in the areas of 3D printer, nuclear medicine and molecular imaging and to increasing the distribution rate of 3D brain phantom.