• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.12
• /
• pp.4946-4960
• /
• 2020

In a device-to-device (D2D) underlaid cellular network, there exist two types of co-channel interference. One type is inter-layer interference caused by spectrum reuse between D2D transmitters and cellular users (CUEs). Another type is intra-layer interference caused by spectrum sharing among D2D pairs. To mitigate the inter-layer interference, we first derive the interference limited area (ILA) to protect the coverage probability of cellular users by modeling D2D users' location as a Poisson point process, where a D2D transmitter is allowed to reuse the spectrum of the CUE only if the D2D transmitter is outside the ILA of the CUE. To coordinate the intra-layer interference, the spectrum sharing criterion of D2D pairs is derived based on the (signal-to-interference ratio) SIR requirement of D2D communication. Based on this criterion, D2D pairs are allowed to share the spectrum when one D2D pair is far from another sufficiently. Furthermore, to maximize the energy efficiency of the system, a resource allocation scheme is proposed according to weighted graph coloring theory and the proposed ILA restriction. Simulation results show that our proposed scheme provides significant performance gains over the conventional scheme and the random allocation scheme.

• Journal of Digital Contents Society
• /
• v.15 no.2
• /
• pp.237-250
• /
• 2014

In this paper, the research problem (1) 2D to 3D stereoscopic images to create the work, the stereoscopic 3D production work in accordance with the method works independently of the 2D image derivatives can be recognized as whether the rights were discussed. (2) In addition, 3D imaging work has to be recognized as a derivatives, the copyright belongs create derivatives and about the rights of attribution investigated.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.8-10
• /
• 2015

최근 2D 와 3D 콘텐츠의 급격한 수요 증가로 인하여 2D 와 3D 공간에서 사람이 인지하는 물체의 시각적 정보량을 정량화할 필요성이 대두되었다. 본 논문에서는 정보이론에 기초하여 엔트로피 관점에서 2D 와 3D 영상의 시각적 정보량을 측정하는 방법을 제시한다. 시각적 정보량을 측정할 때, 기존의 연구에서는 고려되지 않았던 집중영역(saliency), 시각세포의 불균형으로 인한 주변영역 흐림현상인 포비에이션(foveation), 양안합성(binocular fusion)등 인간의 시각적 특성을 반영하였다는 점에서 기존의 연구들과 차이를 둔다. 2D 콘텐츠의 시각적 엔트로피는 단안시에 근거한 질감(texture) 엔트로피와 깊이 엔트로피로 구성되어 있다. 그리고 3D 콘텐츠의 시각적 엔트로피는 2D 에서의 시각적 엔트로피와 양안시에 의한 깊이 엔트로피를 포함한다. 본 논문의 시각적 엔트로피는 2D 와 3D 영상의 시각적 피로도를 측정할 때 사용될 수 있다.

• East Asian mathematical journal
• /
• v.28 no.5
• /
• pp.579-585
• /
• 2012

Let D be a finite digraph with the vertex set V(D) and arc set A(D). A two-valued function $f:V(D){\rightarrow}\{-1,\;1\}$ defined on the vertices of a digraph D is called a signed 2-independence function if $f(N^-[v]){\leq}1$ for every $v$ in D. The weight of a signed 2-independence function is $f(V(D))=\sum\limits_{v{\in}V(D)}\;f(v)$. The maximum weight of a signed 2-independence function of D is the signed 2-independence number ${\alpha}_s{^2}(D)$ of D. Recently, Volkmann [3] began to investigate this parameter in digraphs and presented some upper bounds on ${\alpha}_{s}^{2}(D)$ for general digraph D. In this paper, we improve upper bounds on ${\alpha}_s{^2}(D)$ given by Volkmann [3].

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.431-437
• /
• 2004

This research reviewed the objects of 384 persons (male:86, female:298) from 6 to 50 years old visited the S. Optical shop at Mokpo over two times from Mar. 2002 to Feb. 2004. We obtained the following results by analyzing the visual acuity prescription to keeping at S. Optical shop. 1. The abnormal refraction eyes were 191 persons(49.74%) for simple myopia, 2 persons(0.52%) for myopic simple astigmatism, 180 persons(46.88%) for myopic compound astigmatism, and 1 person(0.26%) for simple hyperopia, 2 persons(0.52%) for hyperopic simple astigmatism, 8 persons(2.08%) for hyperopic compound astigmatism, respectively. 2. Classifying of correction power for 373 persons (male:84, female:289) myopia, so that showed 166 persons(male:36, female) between $$0.25D{\leq_-}2.00D$$, 194 persons(male:46, female:148) between $$2.25D{\leq_-}6.00D$$, 13 persons(male:2, female:11) for over 6.250 respectively. 3. According to the kinds of 192 persons astigmatism subjects(male:53, female:148), direct astigmatism was 145 persons(male:32, female:113), oblique astigmatism 33 persons (male:12, female:21), reverse astigmatism 14 persons(male:5, female:9). 4. The variation of spherical power for myopia showed 299 persons(male:71, female:228) between $$0.00D{\leq_-}0.50D$$, 64 persons(male:11, female:53) between $$0.51D{\leq_-}1.00D$$, 9 persons(male:2, female:7) between $$1.01D{\leq_-}1.50D$$, 1 person(male:0, female:1) between $$1.51D{\leq_-}2.00D$$ variation respectively. Hyperopia showed 8 persons(male:1, female:7) between $$0.00D{\leq_-}0.50D$$, 3 persons(male:1, female:2) between $$0.51D{\leq_-}1.00D$$ variation respectively. 5. The variation of astigmatism power showed 181 persons(male:48 female:113) between $$0.00D{\leq_-}0.25D$$, 25 persons(male:9, female:16) between $$0.26D{\leq_-}0.50D$$, 6 persons(male:0, female:6) between $$0.51D{\leq_-}0.75D$$ astigmatism variation respectively.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.135-147
• /
• 2018

The objective of this study was to analyze the characteristics of combined 1D/2D inundation simulation of riverside farmland using the Hydrologic Engineering Center - River Analysis System (HEC-RAS). We compared and analyzed inundation simulation results between 1D and combined 1D/2D hydraulic simulation using HEC-RAS. Calibration and validation of stream stage were performed using three rainfall events. The coefficient of determination ($R^2$) and root mean square error (RMSE) between simulated and observed stream stage were 0.935 - 0.957 and 0.250 m - 0.283 m in calibration and validation, respectively. The inundation area showed no significant difference in 1D and combined 1D/2D simulation ($8.48km^2$ in 1D simulation, $8.75km^2$ in combined 1D/2D simulation). The average inundation depth by 1D simulation was 1.4 m deeper than combined 1D/2D simulation. In the lower inundation depth, the inundation area by combined 1D/2D simulation was larger than inundation area by 1D simulation. As the inundation depth increased, the inundation area by 1D simulation became wider. In the case of the 1D/2D combined simulation, low elevation areas along the river bank were inundated widely. Compared to 1D/2D combined simulation, the flood radius in some sections was longer in 1D simulation. In the 1D analysis, because the low altitude riverside farmlands are also assumed to stream, it is calculated that riverside farmlands have the same stage as the mainstream when the stream is overflowed. Therefore, the inundation area seems to be overestimated in those sections. In other regions, the inundation areas tend to be broken depending on overflow by each stream cross-section. In the case of river flooding, the overflow is expected to flow to the lower area depending on the terrain, such as the results of the combined 1D/2D simulation. It is concluded that the results of combined 1D/2D inundation simulation reflected the topographical characteristics of low-lying farmland.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.212-227
• /
• 2008

Since 3D face can be rotated freely in 3D space and illumination effects can be modeled properly, 3D face modeling Is more precise and realistic in face pose, illumination, and expression than 2D face modeling. Thus, 3D modeling is necessitated much in face recognition, game, avatar, and etc. In this paper, we propose a 3D face modeling method based on 3D morphable shape modeling. The proposed 3D modeling method first constructs a 3D morphable shape model out of 3D face scan data obtained using a 3D scanner Next, the proposed method extracts and matches feature points of the face from 2D image sequence containing a face to be modeled, and then estimates 3D vertex coordinates of the feature points using a factorization based SfM technique. Then, the proposed method obtains a 3D shape model of the face to be modeled by fitting the 3D vertices to the constructed 3D morphable shape model. Also, the proposed method makes a cylindrical texture map using 2D face image sequence. Finally, the proposed method builds a 3D face model by rendering the 3D face shape model with the cylindrical texture map. Through building processes of 3D face model by the proposed method, it is shown that the proposed method is relatively easy, fast and precise than the previous 3D face model methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1897-1903
• /
• 2011

This paper discusses a 2D/3D conversion of images using technologies like object extraction and depth-map creation. The general procedure for converting 2D images into a 3D image is extracting objects from 2D image, recognizing the distance of each points, generating the 3D image and correcting the image to generate with less noise. This paper proposes modified new methods creating a depth-map from 2D image and recognizing the distance of objects in it. Depth-map information which determines the distance of objects is the key data creating a 3D image from 2D images. To get more accurate depth-map data, noise filtering is applied to the optical flow. With the proposed method, better depth-map information is calculated and better 3D image is constructed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.1
• /
• pp.80-83
• /
• 2018

Purpose Assessment of Serum Thyroglobulin (sTg) value in total thyroidectomy patients having an ablation dose of radioactive iodine indicates remaining cancer or metastasis. Especially, sTg in patients on withdrawal thyroxine or thyrogen administration for radioiodine ablation is an important indicator to determine the direction of further treatment and prognosis. Current guidelines suggest measurement of sTg is performed at 72 hours after the last injection of thyrogen. and assumes that sTg reaches maximum serum levels at that time. The purpose of this study is to evaluate the variation of sTg measured after thyrogen administration. Materials and Methods We compared with sTg performed at 24hours(D0) and 72hours(D2) after the last injection of thyrogen. We reviewed D0 and D2 from 276 patients were divided them into three groups according to ablation dose of radioactive iodine, 5mCi(A group), 30~80mCi(B group) and 100~200mCi(C group). We used T-test for comparison between D0 and D2. sTg was measured in serum using immunoradiometric assay (Tg-plus RIA; BRAHMS, Berlin, Germany). Results There is no critical variation between D0 and D2 in A group(n=100)(P=0.32), The case of increase(D2>D0) is 45, no change(D2=D0) is 23, decrease(D2D0 is 91, D2=D0 is 28, D2D0 is 19, D2=D0 is 2. The biggest increase is 143.6 ng/mL from 98.4 to 242. Conclusion There was a significant difference in the group over 30mCi. and the case of D2>D0 is 45%, 58.7%, 90.5% for each group. therefore, D2 increased as the dose of radioactive iodine increased. Furthermore, the most sTg values of D0 and D2 are variation under 2.0 ng/mL, so reproducibility as well as sensitivity of sTg will be important at values below 2ng/mL.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.479-486
• /
• 2016

In this paper, the algorithm which can convert a 2D image into a 3D Model will be discussed. The 2D picture drawn by a user is scanned for image processing. The Canny algorithm is employed to find the contour. The waterfront algorithm is proposed to find foreground image area. The foreground area is segmented to decompose the complex shapes into simple shapes. Then, simple segmented foreground image is converted into 3D model to become a complex 3D model. The 3D conversion formular used in this paper is also discussed. The generated 3D model data will be useful for 3D animation and other 3D contents creation.