• 한국통신학회논문지
• /
• 제24권10B호
• /
• pp.1963-1970
• /
• 1999

H.263 권고안의 성능을 향상시키고 응용범위를 넓히기 위한 연구가 ITU-T LBC 그룹에서 계속 진행되고 있으며 그 대표적인 것이 H.263+이다. H.263는 기존의 H.263 권고안에 새로운 내용이 추가된 형태의 권고안이다. 본 논문에서는 H.263에 포함된 4개의 협상모드와 H.263+에 새롭게 포함된 5개의 모드를 합한 9개를 H.263+ 협상모드로 규정하고 이들을 영상 클래스별로 실험하여 각 모드의 특성을 분석하였으며 4가지 클래스가 혼합된 영상시퀀스에 대해 장면전환 검출기를 이용해서 9가지 협상모드를 적응적으로 사용하는 방안을 제안하였다. 제안한 방법을 사용한 경우 PSNR 측면에서 기본모드보다 1.6 dB, 협상모드를 고정적으로 사용한 것과 비교해서는 0.4∼1.0 dB 정도의 향상을 가져왔으며 비트효율 면에서도 기본모드보다 프레임당 278 비트, 고정적 협상모드 사용보다 2.6∼180 비트 정도의 감소를 가져왔다.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2255-2260
• /
• 2010

In this study, some novel thiosubstituted butenyne (3a-d, 7b, 15b), butadiene (4a-b, 4d, 5a, 5c, 6b, 8e, 9c, 10b, 16b, 18e) and [3]cumulene (11a-b with isomer 3a-b, 12a with isomer 13a, 14b, 17e) compounds were synthesized from the reaction of 2H-pentachloro-1,3-butadiene with thiols. The new compounds were characterized by elemental analysis, mass spectrometry, UV-vis, IR, 1H NMR, NMR ($^{13}C$ or APT) spectroscopy.

• 한국자기학회지
• /
• 제20권3호
• /
• pp.94-99
• /
• 2010

사각판재형 강재의 마이너 B-H 곡선은 Labview프로그램과 측정 장치를 이용하여 공극 보정과 함께, B-H 곡선의 측정을 바탕으로 3차원 유한요소법으로 구하였다. 측정방법은 1차, 2차 권선이 감긴 고투자율의 페라이트 자심을 철판 위에 두고 폐자로를 구성한 후, 페라이트 자심의 자계와 자속밀도 측정을 바탕으로 하는 것이다. 이 때, 자심과 철판 사이의 미세한 공극의 영향은 최소자승법의 2차 다항식으로 보정하였다. 해석방법은 측정된 기자력과 자속밀도를 해석치와 비교하는 방법을 이용하였다. 이 측정방법은 고장력 강판의 자기저항이 페라이트 자심의 자기저항보다 커다는 가정 하에서는 이용될 수 있다. 그러나 페라이트 자심의 자속밀도가 포화에 가까워지게 되면 페라이트 자심의 투자율이 감소하게 되므로 높은 자속밀도에서 B-H 루프를 정확하게 측정할 수 없었다. 따라서 본 실험에서는 자계가 약 520 A/m, 자속밀도가 0.15 T의 범위에서 사각판재형 강재의 B-H 곡선을 구할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제37권5호
• /
• pp.469-478
• /
• 2005

The subchannel analysis capability of MARS, a multi-dimensional thermal-hydraulic system code, has been enhanced. In particular, the turbulent mixing and void drift models for the flow-mixing phenomena in rod bundles were improved. Then, the subchannel analysis feature was combined with the existing coupled system thermal-hydraulics (T/H) and 3D reactor kinetics calculation capability of MARS. These features allow for more realistic simulations of both the hot channel behavior and the global system T/H behavior. Using the coupled features of MARS, a coupled analysis of a main steam line break (MSLB) is carried out for demonstration purposes. The results of the calculations are very reasonable and promising.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1511-1512
• /
• 2011

• 한국주거학회논문집
• /
• 제11권2호
• /
• pp.129-137
• /
• 2000

This study is about the difference of South and East facing Cooling load of Apartment s Houses using Dynamic Heat-flow Calculation. Therefore, the purpose of this study is come in to use Material for the Thermal Environments of Apartment Houses. The results of the analysis are below. (1) For the peak load of degree hour; The highest is "I" unit and the next high load is H, F, E, C, B, G, D and A unit for the south facing Apartment houses. The higher load is "H" unit and the next high load is I, E, F, B, C, G, D, A Unit for the east facing Apartment houses. (2) For the total load of degree day; The highest load is "I" unit and the next high load is H, G, F, E, C, B, D and A Unit for the south facing Apartment houses. The highest load is "H" unit and the next high load is I, G, E, F, B, C, D, A Unit for the east facing Apartment houses. (3) For the total load of degree day; The highest load is "H" Unit for the east facing Apartment houses and the Lowest load is "A" Unit for the south facing Apartment houses.is "A" Unit for the south facing Apartment houses.nt houses.

• 한국항공운항학회지
• /
• 제9권2호
• /
• pp.63-76
• /
• 2001

The number of civil aviation aircraft registered in Korea has continuously increased. Accordingly the accidents accompanying loss of human or economic resources occurred repeatedly. But the analysis of flight data recorded in FDR was not done by ourselves in the accident investigation because of lack of analysis technology. Therefore, this study is performed to secure the safety of civil aviation by establishing systematic analysis ability of Flight Data Recorder. Through this study, download flight data to personal computer, editing interface file to convert from binary data to engineering data, three dimensional graphical analysis and numerical analysis are performed. For the analysis, the flight of B747-400 model aircraft between Narita(Japan) and Gimpo(Korea) was selected.

• Journal of Microbiology and Biotechnology
• /
• 제16권12호
• /
• pp.1940-1946
• /
• 2006

The influence of environmental conditions on the ganoderic acid (GA) content in the fungus Ganoderma lucidum was investigated using a one-factor-at-a-time design and orthogonal design. Among the various medium components examined, sucrose, soybean powder or peptone, ferrous sulfate, and pH 6.0 were the most suitable carbon source (factor A), nitrogen source (factor B), mineral source (factor C), and initial pH (factor D), respectively, for the GA content in the one-factor-at-a-time design. According to the orthogonal design, the order of effect for the four factors on the GA content was A>C>D>B. The best level of factor A was $A_2$ (sucrose) with a value of +0.34 mg/100 mg DW. The optimal treatment combination was $A_2B_1C_3D_1$ with which the GA content reached up to 2.63$\pm$0.011 mg/100 mg DW. The interactions between the mineral ion and the nitrogen source, and the mineral ion and the pH were both highly significant (P<0.01). The highest interaction effect was ($B_2{\times}D_2$) with a value of +0.19 mg/100 mg DW, which was higher than the level effect value for $B_2$ (peptone) and D$_2$ (pH 5.0). Therefore, the results proved that interactions between factors cannot be ignored. The results also indicated the importance of the interactions between the factors, which may help to understand the metabolic pathway leading to triterpene biosynthesis and the expression and regulation of the key enzymes involved.

• 생명과학회지
• /
• 제15권6호
• /
• pp.972-978
• /
• 2005

제주말의 혈통보존을 위한 기초자료를 마련할 목적으로 국내에서 사육중인 제주말 102두를 대상으로 적혈구항원형 및 혈액단백질형의 유전적 다형성을 조사한 결과는 다음과 같다. 적혈구항원형의 표현형 빈도는 $A^{af}$28두($27.45\%),\;C^{a}$ 101두 ($99.02\%),\;K^{-}$ 99두 ($97.06\%),\;U^{a}$ 64두 ($62.75\%),\;P^{b}$ 37두 ($36.27\%),\;Q^{c}$ 48두 ($47.06\%$)에서 높은 빈도를 나타냈으며, D시스템의 31개의 대립유전자 중 $D^{cgm/dghm}$ 14두($13.73\%),\;D^{adn/cgm}$ 10두($9.80\%),\;D^{ad/cgm}$ 9두($8.82\%),\;D^{dghm/dghm}$ 8두($7.84\%),\;D^{cgm/cgm}$ 8두($7.84\%$)에서 높은 빈도의 유전자형이 관찰되었다. 또한 null allele로 추정되는 $D^{ad/c(e)fgm}\;D^{adn/c(e)fgm}\;D^{c(d)fgm/dghm}$대립유전자가 4두에서 관찰되었다. 혈액단백질형은 $AL^{B}$ 49두($48.04\%),\;GC^{F}$ 101두($99.02\%),\;AlB^{K}$ 99두($97.06\%),\;ES^{FI}$ 37두($36.27\%),\;TF^{F2}$ 26두($25.49\%),\;HB^{B1}$ 46두($45.10\%$), and $PGD^{F}$ 88두($86.27\%$)로 높은 빈도를 보였으며, $HB^{A2B1}$ 4두($3.92\%),\;HB^{AB1}$ 2두($1.96\%),\;HB^{AB2}$ 1두($0.98\%),\;PGD^{D}$ 1두($0.98\%$가 특이하게 관찰되었다. 유전자 빈도는 $A^{af}$ (0.3726), $A^{C}$ (0.2647), $C^{-}$ (0.5050), $K^{-}$ (0.9853), $U^{-}$ (0.6863), $P^{b}$ (0.4657), $Q^{c}$ (0.5294), $D^{cgm}$ (0.3039), $HB^{B1}$(0.6863), $PGD^{F}$ (0.9265), $AL^{B}$ (0.6912), $ALB^{K}$ (0.9852), $GC^{F}$ (0.9950), $ES^{I}$ (0.5000) and $TF^{F2}$ (0.4950) 대립유전자가 가장 높은 빈도를 나타내었고 $D^{cgm(f)}$ (0.0196), $HB^{A}$ (0.0147), $HB^{A2}$ (0.0196), $ES^{G}$ (0.0441), $ES^{H}$ (0.0098), $TF^{E}$TF'(0.0246), $TF^{H2}$ (0.0049) and $PGD^{D}$ (0.0098)의 대립유전자가 제주말 에서 특이하게 관찰되었다. 결론적으로 혈액형에 의한 제주말의 유전적 다형은 $A^{af},\;A^{c},\;C^{-},\;K^{-},\;U^{-},\;P^{b},\;Q^{c},\;D^{cgm},\;D^{dghm},\;D^{adn},\;HB^{B1}$, $PGD^{F},\;AL^{B},\;A1B^{K},\;GC^{F},\;ES^{I},\;TF^{F2},\;AL^{B}$, 대립유전자의 빈도가 비교적 높은 것으로 관찰되었고 $A^{ab},\;A^{abf},\;D^{cgm(f)},\;(D^{cfg(k)m}$ 혹은$D^{c(e)fgm}),\;HB^{A},\;HB^{A2},\;ES^{H},\;TF^{E},\;TF^{H2},\;PGD^{D},\;AL^{B}$의 대립유전자가 제주말에서 특이하게 관찰되었다.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.258-264
• /
• 2015

In this paper, an adequate B-H curve extrapolation method is proposed and its reliability is verified through experiments. A method is developed to estimate the magnetic saturation induction from the density of the lamination core and electrical resistivity. The magnetic saturation induction of electrical steels measured using a vibration sample magnetometer are compared with the analytical results to validate the accuracy of the proposed estimation method. It is found that the predicted error in the magnetic saturation induction of the electrical steels are approximately 1.2% when the proposed method is used. The performance of interior permanent magnet synchronous motors that applies the proposed method are evaluated via 2D nonlinear finite element analysis and through experiments. Based on the obtained results, the extrapolated B-H curves from the estimated saturation induction can be used for various analyses in saturation region.