• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.15-21
• /
• 2002

A control-structure combined optimal design problem is discussed taking a 3-D truss structure as a design object. We use descriptor forms for a controlled object and a generalized plant because the structural parameters appear naturally in these farms. We consider not only minimum weight design problem for structure system, but also suppression problem of the effect of disturbances for control system as the purpose of the design. A numerical example shows the validity of combined optimal design of structure and control systems. We also consider the validity of sensor-actuator collocation for control system design in this paper.

• 응용통계연구
• /
• 제10권1호
• /
• pp.69-84
• /
• 1997

선형 캘리브레이션 실험계획 문제에 대하여, 베이지안 의사결정론을 이용하여 평균제곱오차손실을 최소화한 Kim(1988, 1993)의 실험계획과 관련 문헌의 결과인 몇 가지 최적계획을 비교한다. 비교대상 실험계획으로서 고전적 추정량의 점근분산을 최소화하는 Buonaccorsi(1986)의 최적계획, 회귀분석 모형에서 $ M(x) = \sum x_i x_i '$의 함수를 최대화 또는 최소화하는 D-optimal 또는 A-optimal 계획, Hunter and Lamboy(1981)가 베이지안 추정량의 특성을 설명하기 위하여 그 논문에서 예로 들었던 실험계획을 고려한다. 서로 다른 기준에 의한 최적계획을 비교하기 위해서 우선 기대사후분산을 계산하여 비교하고 몇가지 사전분포에 대하여 몬테칼로 시뮬레이션을 통한 평균분산과 HPD 구간의 크기를 비교한다.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.42-49
• /
• 1994

In this paper we consider efficient 1-D and 2-D linear-phased half-band filter designs. We first introduce a new derivation of the existing Vaidynathan-Nguyen 's half-band filter design method, which verifies that the design provides optimal half-band filters. We then propose an approximately-linear-phased IIR half-band filter design method, which is based on the all-pass equalizer design with the linear phase -$\omega$/2. Finally, we propose an efficient method to design optimal 2-D half-band filters, for which we utilize a 2-D all pass prototype filter of half the order of the desired 2-D half-band filters.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.163-181
• /
• 1998

In this study, the objective is determine the optimal design variable of engine mount system using the rubber mount of bush-type which is usually utilized in passive control to minimize vibrations of vehicle body or transmission from engine into body. The engine model adopted in this study is 4-cylinder, 4-stroke gasoline engine support- ed by 4-points. The system is modelled in 10 d.o.f.-rigid body motion of the engine & transmission in 6 d.o.f., elastic motion of vehicle body in 4 d.o.f.(1st torsional, 1st vertical and 1st & 2nd lateral bending vibration mode). To consider the elastic motion of vehicle body, find the eigenvalues and mode shapes of vehicle body by nodal testing and then determine the modal masses and stiffnesses of the body. The design variables of the engine mount system are locations, stiffness and damping coefficients of the rubber mounts(28 design variables). In case of considering the torque-roll axis for the engine, the design variables of the mount system are reduced to 22 design variables. The objective functions in optimal design process are considered by three cases, that is, 1) transmitted forces through engine mounts, 2) acceleration components of generalized coordinates for the vibration of vehicle body, 3) acceleration of specified location(where gear box) of body. three case are analyzed and compared with each other.

• 패션비즈니스
• /
• 제24권3호
• /
• pp.85-100
• /
• 2020

Recently, 3D printing technology, which is suitable for small-volume production of many varieties, has become considered a key manufacturing technology in the 4th industrial revolution. However, the nature of 3D printing technology means it is not yet able to be applied to traditional textiles due to Fabric Flexibility. The aim of this study is to investigate Textile Structural Design by finding the optimal yarn thickness for Selective Laser Sintering (SLS) 3D printed structures on geogrid dobby woven fabric that gives the optimal flexibility and tensile strength in the final product. The test results for tensile load strength of the 3D printed test samples, using 1.0mm, 0.8mm, 0.6mm and 0.4mm yarn thicknesses, showed that all were found to be above 250N, this higher than the tensile strength of 180N that is recommended for textile products. Based on these results, the four dobby structural patterns with 3D printing produced had four yarn thicknesses: 1.0mm, 0.8mm, 0.6mm, and 0.4mm. The thinner the yarn, the more flexible the fabric; as such the optimal conditions to produce SLS-based 3D printed textiles with suitable strength and flexibility used a thickness of yarn in the range of 0.4mm to 0.6mm.

• 대한기계학회논문집A
• /
• 제39권5호
• /
• pp.535-541
• /
• 2015

본 연구에서는 벽걸이 모니터 브라켓 암의 다중목적 근사최적설계를 수행하였다. 이를 위해 브라켓 암의 자유도를 고려하여 평면내의 회전 각도를 선정해 응력과 처짐량이 크게 발생하는 경우에 대한 최적화 문제를 정식화 하였다. 직교배열표와 반응표면법을 사용하여 평균 및 파라미터 분석을 통해 성능지수에 대한 설계변수 민감도를 확인하였으며, 중심합성계획법과 D-최적 계획법을 사용하여 목적함수와 제한조건함수에 대하여 반응표면 근사모델을 생성하고 $R^2$ 값을 통해 정확도를 평가하였다. 이를 비지배 분류 유전알고리즘에 적용하여 최적화를 수행하고 유한요소해석을 통해 검증하였다. 또한, 중심합성 계획법과 D-최적 계획법을 이용한 최적해를 비교 분석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.184-189
• /
• 2014

This paper presents a multi-objective optimization approach to design rotor slot geometry of three-phase squirrel cage induction machine to achieve NEMA design D torque-speed (T-S) characteristics with high efficiency. The multi-objective Particle Swarm Optimization (MOPSO) algorithm combined with the adaptive response surface method and Latin hypercube sampling strategy is applied to obtain the Pareto optimal designs. In order to demonstrate the validity of the suggested optimal algorithm, an application to rotor slot design of three-phase induction motor is presented.

• 터널과지하공간
• /
• 제33권4호
• /
• pp.209-227
• /
• 2023

정부는 건설산업의 생산성 혁신을 위해 BIM 기반 스마트 건설기술 활성화방안을 지속적으로 발표하고 있다. 설계단계에서는 BIM 데이터와 다른 첨단기술을 융합하여 설계 자동화와 최적화 수행을 목표로 한다. 국내 해저터널 사업인 남해 서면-여수 신덕 국도 건설공사 기본설계에서는 터널설계 프로세스에 따라 3D 공간정보를 이용한 터널설계 자동화 기술을 개발하여 BIM 기반의 설계를 수행하였다. 터널의 선형설계에 제너레이티브 디자인 기법을 사용하여 만 여건 이상의 케이스를 36시간 내에 도출하고, 설계자가 정의한 목적함수의 정량적 평가를 수행하여 설계자가 요구하는 조건의 최적 선형을 도출했다. AI 기반의 지반분류와 3D Geo Model을 구축하여 최적 선형의 경제성 및 안정성을 평가하였다. AI 기반의 지반분류는 시추 코어 1공당 약 30종의 지반분류를 수행하여 그 정밀도를 향상시켰고, 3D Geo Model의 경우 시공 중 추가되는 지반 데이터를 누적할 수 있다는 점에서 그 활용도를 기대할 수 있다. 3D 발파설계의 경우 Dynamo 상에서 노선상의 모든 보안물건을 검토하여 최적 장약량을 5분 만에 도출하고, 직관적이고 편리한 시공관리를 위해 3D 공간상에 설계 결과를 시각화함으로서 시공 중에 직접 활용할 수 있도록 했다.

• 한국정밀공학회지
• /
• 제32권9호
• /
• pp.815-824
• /
• 2015

In this study, we conducted the approximate multi-objective optimization of gap sizes of pressurized-water reactor (PWR) annular fuels. To determine the contacting tendency of the inner-outer gaps between the annular fuel pellets and cladding, thermoelastic-plastic-creep (TEPC)analysis of PWR annular fuels was performed, using in-house FE code. For the efficient heat transfer at certain levels of stress, we investigated the tensile, compressive hoop stress and temperature, and optimized the gap sizes using the non-dominant sorting genetic algorithm (NSGA-II). For this, response surface models of objective and constraint functions were generated, using central composite (CCD) and D-optimal design. The accuracy of approximate models was evaluated through $R^2$ value. The obtained optimal solutions by NSGA-II were verified through the TEPC analysis, and we compared the obtained optimum solutions and generated errors from the CCD and D-optimal design. We observed that optimum solutions differ, according to design of experiments (DOE) method.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.9-16
• /
• 2003

A strategy of the optimal shape design with FEA(Finite Element Analysis) for 2-D structure is proposed by comparing subproblem approximation method with first order approximation method. A cantilever beam with two different loading conditions, a concentrated load and an evenly distribute load, and truss structure with a concentrated loading condition are implemented to optimize the shape. It gives a good design strategy on the optimal truss structure as well as the optimal cantilever beam shape. It is found that the convergence is quickly finished with the iteration number below ten. Optimized shapes of cantilever beam and truss structure are shown with stress contour plot by the results of the subproblem approximation method and the first order approximation methd.