• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.152-161
• /
• 2021

The paper focuses on Device-to-device (D2D) Architectures evaluation frameworks. D2D communication and discovery can improve spectrum usage efficiency and optimize the tradeoffs between throughput and energy consumption. The target operation modes involve both indirect communication between two nodes via a base station or the direct communication among proximal nodes, enabling use cases that can support communications out of cellular coverage, as well as low end-end delay requirements. The paper will present the architectural evolution of D2D networks within 3GPP standardization and will highlight key network functionalities and signaling protocols. It will also identify key analytical and simulation models that can be used to assess the performance and energy efficiency of resource allocation strategies, and it will present a suitable cross-layer integrated framework.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.

• 한국연소학회지
• /
• 제20권2호
• /
• pp.36-39
• /
• 2015

The combustion characteristics of metal fiber burner fueled natural gas with tail gas produced from reforming process were analyzed on the point of flame stability and excess air conditions. Also, it was analyzed the effect of energy efficiency improvement due to decrease the fuel input in reforming system by using residue gases. As a results, it was confirmed that tail gas including hydrogen, CO and $CO_2$ could be directly injected without any change of air control system in natural gas burner and also energy efficiency was increased up to 30% maintained stable combustion.

• 대한전자공학회논문지TC
• /
• 제44권3호
• /
• pp.92-97
• /
• 2007

스위칭 모우드 증폭기를 마이크로파 대역에서 이용하고자 하는 많은 연구가 있으며, 이러한 증폭기 중 E급 증폭기는 이론적으로 스위칭 동작을 통해 100%의 효율을 얻을 수 있다. 본 논문에서는 2.4GHz 대역 마이크로파 E급 증폭기로 출력 전력이 17.6dBm, 66%의 전력부가효율을 갖는 설계된 증폭기를 무선 랜 송신부에서 사용하기 위해 증폭기의 비선형 왜곡을 보상하고자 테이블 참조기법(Look Up Table)을 이용한 기저대역 사전왜곡 기법을 적용하였다. 설계된 증폭기는 -3dBm의 입력 무선랜신호를 인가하였을 때 출력스펙트럼 측정 결과가 IEEE 무선랜 스펙트럼 마스크 표준규격을 만족하며, 기저대역 사전왜곡을 적용하였을 때 중심주파수에서 20MHz offset인 주파수에서 최대 5dB의 ACPR 특성이 향상되었다.

• 한국전자파학회논문지
• /
• 제10권1호
• /
• pp.122-132
• /
• 1999

본 논문에서는 37~40 GHz 대의 직경 30 cm의 소형 경면수정 ADE 반사경 안테나를 설계 제작하고 복사 특성을 고찰하였다 안테나 설계시 개구면 전계분포는 균일분포와 포물분포가 결합된 전계분포로 가정하고 빔폭, 개구연효율, 사이드로브 레벨 특성의 변화를 고찰하고 이것을 설계에 이용할 수 있도록 하였다. 설계 제작된 안테나의 이득과 사이드로브 레벨은 40 GHz에서 39.9 dBi(효율 : 61.9 %)와 -18.8 dB로 측정되었다. 이는 설계시 목표했던 효율 60 % 이상, 사이드로브 레벨 -20 dB 이하에 근접한 것으로 나타났다.

• 전기전자학회논문지
• /
• 제21권1호
• /
• pp.89-91
• /
• 2017

본 논문에서는 MIMO 시스템의 스펙트럼 효율 향상을 위해 두 개의 다중 시공간 블록 부호 기반의 공간변조 기법을 제안하였다. 제안된 기법의 성능 향상을 위하여, 각 MSSTC 내부의 계층에 전력과 위상을 할당하고, 공간변조 코드북에 회전각을 할당하였다. 추가로, D-MSSTC-SM 기법의 최소 코딩 이득 거리를 최대화 할 수 있도록 전력과 위상 그리고 회전각을 최적화하였다. 모의 실험 결과, 제안된 D-MSSTC-SM 기법이 높은 스펙트럼 효율을 가지면서 더 좋은 오류 성능을 얻음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2910-2917
• /
• 2020

Digital light processing three-dimensional (3D) printing technique is a powerful tool to rapidly manufacture plastic scintillators of almost any shape or geometric features. In our previous study, the main properties of light output and transmission were analyzed. However, a more detailed study of the other properties is required to develop 3D printed plastic scintillators with expectable and reproducible properties. The 3D printed plastic scintillator displayed an average decay time constants of 15.6 ns, intrinsic energy resolution of 13.2%, and intrinsic detection efficiency of 6.81% for 477 keV Compton electrons from the ¹³⁷Cs γ-ray source. The 3D printed plastic scintillator showed a similar decay time and intrinsic detection efficiency as that of a commercial plastic scintillator BC408. Furthermore, the presented estimates for the properties showed good agreement with the analyzed data.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.49-57
• /
• 2000

This study was carried out to find the optimal condition to treat refractory organic matter which can’t treat clearly with biological treatment and to find the optimal division dosage and division dose timing in the modification of Fenton oxidation which is used resolve the problem that hydrogen peroxide is too expensive. The results are following; 1. The highest TOC removal efficiency was 41% and color removal efficiency was 64% when the dilution magnitude of leachate is fold. This suggests that dilution is efficiency when high concentration of leachate is treated. 2. The removal efficiency of TOC and color increased up to the molar ratio between ferrate and hydrogen peroxide was 1:1. However above that ratio, removal efficiency hardly increased. The highest removal efficiency of TOC and color were 38% and 71% when the mole ratio of ferrate to hydrogen peroxide was 1.5:1. 3. When the mole ratio between ferrate and hydrogen peroxide was fixed, the removal efficiency of TOC and color increased as the dosage of hydrogen peroxide increased. 4. pH of samples were adjusted at pH 3, 5, 7, 9, 11. After oxidation reaction, pH of samples were dropped to 2.59, 2.54, 5.34, 6.36 and 9.68. The highest color removal efficiency was 75.7% when initial pH was at pH 7. 5. The removal of TOC and color was ended within 10. min. and the removal efficiency increased logarithmically within 10min. However after 10 min., the removal efficiency of hardly increased. 6. The color removal efficiency was higher with modification of fentone oxidation than that with fentone oxidation by 5%. Optimal division dosage ratio was 1:1 and optimal dose timing ratio was 2:1. However the TOC removal efficiency was not higher with modification of Fenton oxidation than that with Fenton oxidation.7. The CO $D_{Mn}$ /BO $D_{5}$ Ratio decreased with the time went by. It meant bioresolution increased as time went by. However, after 15 min., the CO $D_{Mn}$ /BO $D_{5}$ Ratio did not decrease any more. 8. In the case of $H_2O$$_2$ Divisiom Dose experiment, the increase of bioresolution was highest at the $H_2O$$_2$ Division dosage Ratio of 3:7.3:7.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.963-968
• /
• 2007

본 논문에서는 현재 3D 그래픽뿐만 아니라 게임에서 정확한 충돌감지(collision-detection)나 컬링(culling)등은 3D공간에서 이러한 표준객체를 중심으로 많은 연구가 이루어지고 있다. 3D그래픽 분야에서 H/W의 놀라운 발달과 3D게임을 즐기는 게이머들이 좀 더 사실적인 표현에 깊은 관심을 가지고 있다. 90년대 중반 이후로 많이 연구되어진 3D 게임 엔진과 알고리즘 중에서 표준 3D 객체의 다양한 충돌 알고리즘을 분석하고, 기존의 3D 객체의 단순한 Hierarchies 구조에서 탈피하여 3D공간상에서 LOD(Level-of-Detail) 알고리즘을 이용하여, 3D객체가 3D 공간상에서 충돌검사의 성능을 향상시켜서 3D 게임의 필수 요소인 3차원 공간상의 효율적인 렌더링과 사실적인 표현의 알고리즘을 제안하여 실시간을 중요시 하는 3D 게임에서 사실감과 효율성을 높일 수 있게 제안한다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.147-154
• /
• 2012

The number of vehicles applied diesel engine are rapidly rising for fuel economy. Accompanying this trend, application of an after-treatment system is strictly required as a result of reinforced emission regulation. The Diesel Particulate Filter (DPF) system is considered as the most efficiency method to reduce particulate matter (PM) by car makers but also in retrofit market. In recently, various kinds of partial flow DPF are widely used for proper filtration performance and reducing of pressure drop but it is difficult to define the characteristics of these filters because the filtration mechanism is obscure according to the status of these systems. In this paper we investigated the characteristics of cell open type DPF according to the status of filter especially, PM loading. The PM loading mass in the p-DPF are predicted from increase of differential pressure of DPF and the trend of filtration efficiency so that we can measure filtration efficiency and Balance Point Temperature (BPT) of this p-DPF according to PM loading.