• International Journal of Computer Science & Network Security
• /
• v.21 no.1
• /
• pp.152-161
• /
• 2021

The paper focuses on Device-to-device (D2D) Architectures evaluation frameworks. D2D communication and discovery can improve spectrum usage efficiency and optimize the tradeoffs between throughput and energy consumption. The target operation modes involve both indirect communication between two nodes via a base station or the direct communication among proximal nodes, enabling use cases that can support communications out of cellular coverage, as well as low end-end delay requirements. The paper will present the architectural evolution of D2D networks within 3GPP standardization and will highlight key network functionalities and signaling protocols. It will also identify key analytical and simulation models that can be used to assess the performance and energy efficiency of resource allocation strategies, and it will present a suitable cross-layer integrated framework.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.

• Journal of the Korean Society of Combustion
• /
• v.20 no.2
• /
• pp.36-39
• /
• 2015

The combustion characteristics of metal fiber burner fueled natural gas with tail gas produced from reforming process were analyzed on the point of flame stability and excess air conditions. Also, it was analyzed the effect of energy efficiency improvement due to decrease the fuel input in reforming system by using residue gases. As a results, it was confirmed that tail gas including hydrogen, CO and $CO_2$ could be directly injected without any change of air control system in natural gas burner and also energy efficiency was increased up to 30% maintained stable combustion.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.92-97
• /
• 2007

Switching mode amplifiers have been studied widely for use at microwave frequency range, and the class E amplifier which is a type of switching mode amplifier offers very high efficiency approaching 100%. In this paper, 2.4GHz microwave class E amplifier with 66% power added efficiency (PAE) and 17.6dBm output has been linearized for use at wireless LAN transmitter, and digital predistortion technique with look up table is applied. With -3dBm input power of wireless LAN, measured output spectrum can meet the required IEEE 802.11g standard spectrum mask, and the digital predistortion output spectrum has been improved by 5dB of ACPR at 20MHz offset from center frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.122-132
• /
• 1999

In this paper, a shaped small-size ADE(Axially Displaced Ellipse) reflector antenna of 30 cm in diameter operating from 37 to 40 GHz was designed. The experimental antenna was manufactured, and the radiation characteristics evaluated. In the procedure of antenna design, aperture field distribution was assumed to uniform + parabolic distribution. And the variations of beam width, aperture efficiency, and sidelobe level as functions of aperture field distributions were investigated, and these results presented to be used in antenna design. The measured gain and sidelobe level of experimental antenna were found 39.9 dBi(efficiency : 61.9%) and -18.8 dB for 40 GHz. These values show good agreement in design goal of efficiency more than 60% and sidelobe level less than -20 dB.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.89-91
• /
• 2017

We proposed a spatial modulation (SM) scheme to improve spectral efficiency of multi-input multi output (MIMO) systems by using double multi-strata space-time codes (D-MSSTC). For improving the performance of proposed scheme, we allocate transmit power and phase to layers in each MSSTC, and assign rotation angle to SM codebooks. Additionally, we jointly optimize power, phase and rotation angle to maximize the minimum coding gain distance of D-MSSTC-SM. It is observed that the proposed scheme shows better error performance with high spectral efficiency than conventional schemes in simulation results.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2910-2917
• /
• 2020

Digital light processing three-dimensional (3D) printing technique is a powerful tool to rapidly manufacture plastic scintillators of almost any shape or geometric features. In our previous study, the main properties of light output and transmission were analyzed. However, a more detailed study of the other properties is required to develop 3D printed plastic scintillators with expectable and reproducible properties. The 3D printed plastic scintillator displayed an average decay time constants of 15.6 ns, intrinsic energy resolution of 13.2%, and intrinsic detection efficiency of 6.81% for 477 keV Compton electrons from the ¹³⁷Cs γ-ray source. The 3D printed plastic scintillator showed a similar decay time and intrinsic detection efficiency as that of a commercial plastic scintillator BC408. Furthermore, the presented estimates for the properties showed good agreement with the analyzed data.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.49-57
• /
• 2000

This study was carried out to find the optimal condition to treat refractory organic matter which can’t treat clearly with biological treatment and to find the optimal division dosage and division dose timing in the modification of Fenton oxidation which is used resolve the problem that hydrogen peroxide is too expensive. The results are following; 1. The highest TOC removal efficiency was 41% and color removal efficiency was 64% when the dilution magnitude of leachate is fold. This suggests that dilution is efficiency when high concentration of leachate is treated. 2. The removal efficiency of TOC and color increased up to the molar ratio between ferrate and hydrogen peroxide was 1:1. However above that ratio, removal efficiency hardly increased. The highest removal efficiency of TOC and color were 38% and 71% when the mole ratio of ferrate to hydrogen peroxide was 1.5:1. 3. When the mole ratio between ferrate and hydrogen peroxide was fixed, the removal efficiency of TOC and color increased as the dosage of hydrogen peroxide increased. 4. pH of samples were adjusted at pH 3, 5, 7, 9, 11. After oxidation reaction, pH of samples were dropped to 2.59, 2.54, 5.34, 6.36 and 9.68. The highest color removal efficiency was 75.7% when initial pH was at pH 7. 5. The removal of TOC and color was ended within 10. min. and the removal efficiency increased logarithmically within 10min. However after 10 min., the removal efficiency of hardly increased. 6. The color removal efficiency was higher with modification of fentone oxidation than that with fentone oxidation by 5%. Optimal division dosage ratio was 1:1 and optimal dose timing ratio was 2:1. However the TOC removal efficiency was not higher with modification of Fenton oxidation than that with Fenton oxidation.7. The CO $D_{Mn}$ /BO $D_{5}$ Ratio decreased with the time went by. It meant bioresolution increased as time went by. However, after 15 min., the CO $D_{Mn}$ /BO $D_{5}$ Ratio did not decrease any more. 8. In the case of $H_2O$$_2$ Divisiom Dose experiment, the increase of bioresolution was highest at the $H_2O$$_2$ Division dosage Ratio of 3:7.3:7.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.963-968
• /
• 2007

In this paper introduce Standard 3D object(Bounding-Volume). In 3D game very efficient control algorithm Using collision detection which controls the convenient of a game based on Standard 3D object specially collision-detection. This algorithm is designed LOD(Level-of-Detail) using Dynamic-Hierarchies of collision detection efficiency improvement in 3D object.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.147-154
• /
• 2012

The number of vehicles applied diesel engine are rapidly rising for fuel economy. Accompanying this trend, application of an after-treatment system is strictly required as a result of reinforced emission regulation. The Diesel Particulate Filter (DPF) system is considered as the most efficiency method to reduce particulate matter (PM) by car makers but also in retrofit market. In recently, various kinds of partial flow DPF are widely used for proper filtration performance and reducing of pressure drop but it is difficult to define the characteristics of these filters because the filtration mechanism is obscure according to the status of these systems. In this paper we investigated the characteristics of cell open type DPF according to the status of filter especially, PM loading. The PM loading mass in the p-DPF are predicted from increase of differential pressure of DPF and the trend of filtration efficiency so that we can measure filtration efficiency and Balance Point Temperature (BPT) of this p-DPF according to PM loading.