• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.462-469
• /
• 2010

Gas-liquid 2 phase processes are usually used in chemical, biochemical, environmental engineering and food process. For optimizing these processes, understanding bubble's precise movement and shape are needed. Bubble's movement and shape are effected by liquid's properties-viscosity, surface tension and bubble's properties-size, velocity. This paper deals with experimental data of bubble's movement and shape in high viscous silicone oil. Also, drag coefficient and deformation factor given by other researcher's papers and books are used to predicting and comparing bubble's terminal velocity, drag coefficient, deformation factor and shape with experimental value. Experimental data show that bubble moves faster when it moves in lower viscous silicone oil and it's drag coefficient is bigger when it moves in high viscous silicone oil. Bubble's shape is close to sphere when moving in high viscous silicone. Formulas proposed by Batchelor expect most accurate prediction for bubble's velocity and drag coefficient. Bubble's 2D shape predicted by Batchelor's energy balance, drag coefficient and deformation factor show excellent agreement with experimental bubble's 2D shape.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.430-437
• /
• 2016

In general, noise measurement results show larger random ripple than those of the network analyzer. The reason for the lager random ripple of the noise measurements is considered that the general noise measurements uses absolute measured noise powers, while the network analyzer measures using a ratio of the measured powers. In this paper, a novel measurement method of noise correlation matrix using relative noise ratios is proposed. Proposed method measures the five noise powers of DUT for the five input impedance variations and the four relative noise ratios are formed using the five measured noise powers. The four noise ratios are used to compute the noise correlation matrix and noise parameters. The resulting noise parameters for a 0.5 dB attenuator show good agreements with theoretical values calculated by S-parameters. Also, the noise parameters of an active DUT with a noise figure of less than 1 dB are measured and the measured results show a small random ripple as expected and their values are physically acceptable. In conclusion, the proposed method can be applied to the noise parameter measurements for DUT with a noise figure below 1 dB.

• Journal of the Korea Society for Simulation
• /
• v.22 no.2
• /
• pp.63-71
• /
• 2013

Developing future weapons systems has become increasingly complicated and costly. There, modeling and simulation techniques have been highly interested in developing the defense systems. Modeling and simulation techniques provide a means to simulate military training, strategies, military doctrines, and weapons acquisition. In this paper, we proposed a small scale engagement scenario generation method for engagement M&S model. Generated scenario is one of critical factors in the field of commander training, operational analysis, and tactical evaluation. The objective of this paper is to develop a scenario generation method for small scale engagement using the FSA(Finite State Automata) and DFS(Depth First Search) algorithm. The proposed method is verified using a one-on-one combat engagement scenario between assault ship and reconnaissance ship. Also, we are visualized using Delta3D$^{TM}$.

• The KIPS Transactions:PartD
• /
• v.17D no.2
• /
• pp.119-128
• /
• 2010

The application field of OSS is being expanded farther and the existing studies are well established theoretically but not actually widely used. Because so many criteria and complexity of selection methods result in low efficiency and not proper for use. In this master's thesis, to solve these problems I propose a selecting technique for OSS with less criteria, which is more effective and easy to use than before. Based on the existing studies, we identify assessment criteria which common used and redefine 14 evaluation attributes as well as 31 assessment criteria through elimination and grouping. And evaluate the criteria in four steps such as Initial assessment, Functional assessment, Characteristical assessment and Supplemental assessment. To evaluate the adequacy of suggested technique, 29 database management tools for MySQL are selected as candidates, and applied to the technique I proposed. As the result, time and effort for evaluation is reduced sharply and we can use this technique more easily.

• Analyses & Alternatives
• /
• v.8 no.2
• /
• pp.87-115
• /
• 2024

This study examines the effect of R&D investment on firm performance and value of Chinese private firms. Through R&D investment, firms aim to acquire knowledge and technological resources to create innovation and competitive advantage, which ultimately enhances firm performance and value. However, unlike other investments, R&D investments are characterized by high adjustment costs and risks, uncertainty and asymmetric information. In addition, the effect of R&D investment on firm performance and value has been shown to be mixed results due to various internal and external contextual factors. Therefore, this study intends to consider how the ESG activities of firms, which have recently attracted attention, act as a contextual factor in the results of R&D investment. This is because interaction with stakeholders through ESG activities is considered to be an important factor in securing competitive advantages and sustainable growth. In this context, this study measures the effect of a firm's R&D investment on its business performance by dividing it into financial performance and value, respectively, and examines the moderating effect of ESG score on the relationship. Based on empirical analysis of all Chinese private firms from 2010 to 2019, the results show that a firm's R&D investment has a negative impact on performance and a positive impact on value. Furthermore, a high ESG score of private firms positively moderates each relationship, emphasizing the importance of ESG activities.

• Cartoon and Animation Studies
• /
• s.17
• /
• pp.37-51
• /
• 2009

Immersion is the key factor in determining success or failure for fictional narrative animations. It does matter to not only for the socio-economic achievements like box-office success but to the asthetical achievement, immersion is very important prerequisite character that are raised in terms of research needs. Fictional narrative animation shares the audience's immersive method with the narrative content and Virtual Reality, since animation has the character which narrates itself with the visual image format (including sound) and added the fact that 3D format which emphasizes realism compared with the recent 2D animation has been ubiquitous phenomenon. In other words, the artistic for called 'animation' is located between the view point that text has the immersive point intrinsic and oppositely, specific function of the certain media which stays extrinsic of the text enforce the participants into the immersion. In any case, the subject who experience immersion is the audience, so the most useful theory to research the phenomenon 'immersion' is Constructivism cognitive narrotologic approach which lies the peader-spectator as the centric notion and is more useful than text analysis or research on the visual effects. In this study, research and review about the studies on the audience's immersive experience would be preceded particularly aroud the constructivism theories, and examine the uniqueness and naures of the animation which makes the audience immersive.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.4
• /
• pp.305-312
• /
• 1995

In general, the radiation stresses based on the linear wave theory are overestimated which result in the discrepancy between the computed results and laboratory data of mean water level in the surf zone. Oh (1995) estimated the mean water level by using Svendsen's radiation stress model (1984) and compared with the experimental data. In this study. the computed results showed good agreements with the experimental data in the case of small wave steepness. while the results were overestimated in the case of large wave steepness. In this paper. the dimensionless radiation stress proposed by Svendsen (1984) is expressed in terms of relative water depth at breaking point and deep water wave steepness. The computed results are compared with the results calculated by d linear wave theory, Stive's model (1984). Sawaragi et al's model (1984) based on the spectrum of breaking wave components. and published laboratory data. The computed results of the modified Svendsen's model arc favourably compared with the laboratory data.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.2
• /
• pp.34-40
• /
• 1993

A microstrip antenna for mobile system are designed at the resont frequency 0.88 GHz. The microstrip array antenna are designed to depend on the size of rectanular microstrip path for the relative current distribution to be 1:4.69:1 using Tchebyscheff polynominals. Gain difference between the main lobe and sidelobe is calculated for theoritical values of 20 dB. The designed microstrip array antenna are mesureed various characteristics, such as return loss, radiation pattern, V.S.W.R, bandwidth, and agreed with each other and theoretical value. Also it is presented a process of phase variation of patch array antenna depend on relative current distribution for beam scanning.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8S
• /
• pp.2679-2687
• /
• 2000

위성 ATM 망에서 TCP/IP 기반의 응용 서비스를 제공하기 위해서는 위성의 긴 전송지연과 이성 채널의 버스트 오류 특성에 따른 정확한 전송 성능의 영향과 분석이 요구되며, 아울러 성능 목표치가 제시되어야 한다. 본 논문은 2Mbps급 KOREASAT위성을 이용한 위성망과 지상망이 상호 연동된 실제 위성/지상 ATM LANE(LAN Emulation)을 구현하고, 위성 채널의 Eb/No와 TCP 소켓 버퍼 크기, 그리고 전송 메시지 크기를 바꾸어 가면서 그때의 TCP/IP 트래픽과 FTP의 전송성능을 비교 분석하였다. 아울러 IPoA(IP over ATM)기반의 영상회의 서비스에 대한 전송 품질 및 메시지 전달 특성 등을 분석하였다. 연구결과 TCP 소켓 버퍼 크기가 증가할 때 TCP의 전체 성능이 증가함을 알 수 있으나 제한된 최대 윈도우 크기 64kbytes와 위성채널의 오류 특성으로 인해 실제 최대 전송속도는 이론상의 목표치를 달성하지 못함을 보여 주었다. 또한 2Mbps 위성링크에서 Eb/No가 6dB 이하에서는 실제적으로 제공할 수 있는 최대 전송성능의 50%이하로 떨어져 TCP/IP over ATM 서비스가 거의 불가능함을 보여주었다. FTP의 경우, 파일 크기가 작으면 최대 전송속도에 도달하기 전에 파일 전송이 완료되어 대역폭 이용의 효율성 측면에서 TCP/IP의 slow start 메케니즘이 적절하지 않음을 보여주었다. 이울러 IPoA영상회의 서비스에서도 Eb/No가 약 6.5dB 이하에서는 영상이 거의 정지되고, 메시지 전달시간도 ITU에서 권고하는 목표치를 훨씬 상회하여 서비스가 거의 불가능함을 보였다.

• Fashion & Textile Research Journal
• /
• v.1 no.4
• /
• pp.387-392
• /
• 1999

The effects of the ratio of warp diameter to filling diameter (${\beta}$-ratio) and warp thread crash on the crimp factor and the yarn curvature were studied theoretically in this paper. The models of 2/2 twill fabric derived square cloth and sinusoidal curved cloth were used for the theoretical analysis. The crimp factors (C) for the models were given theoretically as follows; (1) Derived square cloth(general equation for b) $$C=\frac{(1+{\beta})({\theta}-sin{\theta})}{(1+{\beta})sin{\theta}+{\alpha}}$$ (2) Sihusoidal curved cloth $$C=\frac{(1+{\beta})sin{\theta}\[1+\{\frac{{\pi}(1-cos{\theta})}{4sin{\theta}}\}^2\]+{\alpha}}{(1+{\beta})sin{\theta}+{\alpha}}-1$$ The curvatures(${\kappa}$) for the models were given theoretically as follows; (1) Derived square cloth $${\kappa}=\frac{2}{d_w+d_f}$$ (2) Sinusoidal curved cloth $${\kappa}=\|{^{\;\;\prime\prime} \atop r}(s)\| \\ where \;s=\frac{p^'}{{\pi}}\(u+\frac{k^2u}{4}+\frac{k^2}{8}sin2u\)$$.