• 한국의류학회지
• /
• 제47권5호
• /
• pp.839-852
• /
• 2023

This study examined personal protective clothing, specifically the D (M, L, XL) and C (L, XL, 2XL) levels with high sales rates. The goal was to collect essential data for developing Korean personal protective clothing. There were eight and twelve patterns for the D-level and C-level, respectively. While the pattern dimensions were similar, the chest and waist circumferences (relaxed) were larger in the C-level, and the waist (extended), hip, upper arm circumference, and total lengths were larger in the D-level. The D-level wear sensation worked well for average-sized Koreans in their twenties, but the C-level caused discomfort in multiple areas, such as the face, arms, armpits, hips, crotch, thighs, and knee during movement. Consequently, this region required pattern adjustments and resetting for improved comfort. The grading rules were 10 cm in the chest, waist, and hip circumference, regardless of the level, with slight differences in other parts depending on the levels. Thus, manufacturers should establish new grading rules to suit the Korean body shape.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.31-36
• /
• 2005

This paper describes a research work on the die design for the deep drawing & ironing(D. D. I) of high pressure gas cylinder. D. D. I die set is large-sized die used in horizontal press, which is usually composed of a drawing, and an ironing die. Design method of D. D. I die set is very different from that of conventional cold forging die set. Outer diameter of the die set is fixed because of press specification and that of the insert should be as small as possible for saving material cost. In this study, D. D. I die set has been designed to consider those characteristics, and the feasibility of the designed die has been verified by FE-analysis. In addition, the automated system of die design has been developed in AutoCAD R14 by formulating the applied methods to the regular rules.

• 정보처리학회논문지D
• /
• 제15D권6호
• /
• pp.767-776
• /
• 2008

마이크로어레이 기술은 최근 실험적 분자생물학 분야에서 활발히 사용되고 있는 기술이다. 마이크로어레이 데이터는 한 번의 실험으로 수 만개의 유전자에 대한 발현값을 얻을 수 있으므로, 여러 질병의 발현형질을 연구하는데 매우 유용하게 사용된다. 마이크로어레이 데이터의 문제점은 참여하는 유전자의 수에 비해 참여하는 샘플(생물조직샘플)의 수가 매우 적고, 분류분석 기법을 사용하여 얻어진 분류자의 해석이 어렵다는 점이다. 본 연구에서는 위의 문제점을 해결하고자, 샘플 내 순위를 이용하여 동일한 생물학적 목적으로 수행된 공개 마이크로어레이 데이터를 통합하고, 순위 비교를 기반으로 하는 다양한 유전자 개수로 이루어진 암 분류 결정 규칙들로 이루어진 분류자를 제안한다. 본 분류자는 k개의 규칙으로 이루어진 앙상블 방법을 기반으로 하며, 하나의 규칙은 최대N개의 유전자, 관련유전자간의 순위비교 관계식, 판별클래스로 이루어져 있다. 하나의 규칙에 참여하는 유전자의 수를 다양하게 함으로써 좀더 신뢰성 높은 분류자를 생성할 수 있다. 또한 본 분류자는 생물학적 해석이용이하며, 분류자를 구성하는 유전자를 명확히 식별할 수 있고, 총 개수가 많지 않으므로 임상환경에서의 사용가능성도 생각해 볼 수 있다.

• 대한토목학회논문집
• /
• 제26권3D호
• /
• pp.511-517
• /
• 2006

본 논문은 우리나라 민 군 겸용 비행장의 고도제한의 기준이 되는 군용항공기지법을 중심으로 비행안전구역을 분석하기 위한 방법을 연구하여 개발사업 시행시에 제한 지역을 분석할 수 있는 효과적인 방법을 제시하고 최근 대두되고 있는 비행장 주변지역의 고도제한에 따른 문제 해결에 도움을 주고자 한다. 이를 위해서 지리정보체계(GIS) 기법을 활용하여 항공기 지법에서 규정하고 있는 비행안전구역의 3차원 모형을 효과적으로 생성하기 위한 방법을 제시하고, 비행안전구역 내에서 자연지형 및 인공지물로 인한 장애지역과 대상을 자동으로 식별하기 위한 기법을 제시하였다. 제시한 방법을 실제적으로 적용해보기 위하여 실험지역으로 선정한 비행장에 대하여 상용의 수치지도 자료와 위성영상을 기반으로 지형공간정보를 생성하기 위한 단계적인 방법을 제시하였으며 실험지역 비행장의 비행안전구역 모형을 생성하고, 장애지역과 대상을 식별하여 비행장 비행안전구역 분석을 위한 통합 모형을 가시화함으로써 제시한 방법들의 활용성을 보였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• Industrial Engineering and Management Systems
• /
• 제10권1호
• /
• pp.34-42
• /
• 2011

Many companies open multiple projects simultaneously due to market trends, which results in a crowding out effect because of limited resources. R&D engineers become overloaded and scheduling of product development is delayed resulting in timing misses and lost sales leads. The company in this case study (Company A), often opens up many projects simultaneously in order to respond to market needs quickly. The engineers are overloaded and, of course, the schedule is delayed. In order to identify problems, Company A began using Dr. Goldratt's Thinking Processes (TP) during new product development (NPD). When the analysis phase of TP was completed, Company A's core problem was identified as "the quantity of kick-off projects." Consequently, new rules and conditions and procedures were proposed for the opening, suspending, stopping, and closing of projects. Finally, the "Future Reality Tree" ensured that the proposed rules, conditions and procedures were set up as an available solution approved for practical application by executives. After a one-year trial run, the results showed that the Project Duration Rate was reduced by 53%, the Project Closed Rate was increased by 140% and the Project on Time Rate was increased from 10% to 68%. The above results give significant evidence of the benefits of the proposed methodology.

• 한국의류학회지
• /
• 제41권5호
• /
• pp.825-839
• /
• 2017

Generative Art (also called as the art of the algorithm) creates unexpected results, moving autonomously according to rules or algorithms. The evolution of digital media in art, which tries to seek novelty, increases the possibility of new artistic fields; subsequently, this study establishes the basis for new design approaches by analyzing visual cases of Generative Art that have emerged since the 20th century and characteristics expressed on fashion. For the methodology, the study analyzes fashion designs that have emerged since 2000, based on theoretical research that includes literature and research papers relating to Generative Art. According to the study, expression characteristics shown in fashion, based on visual properties of Generative Art, are as follows. First, abstract randomness is expressed with unexpected coincidental forms using movements of a creator and properties of materials as variables in accordance to rules or algorithms. Second, endlessly repeated pattern imitation expresses an emergent shape by endless repetition created by a modular system using rules or 3D printing using a computer algorithm. Third, the systematic variability expresses constantly changing images with a combination of system and digital media by a wearing method. It is expected that design by algorithm becomes a significant method in producing other creative ideas and expressions in modern fashion.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.735-739
• /
• 2001

This paper describes a research work of developing computer-aided design of a product with bending and piercing for progressive working. An approach to the system for progressive working os based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theorise, experimental results and the empirical knowledge of field experts. the system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of three main modules, which are input and shape treatment, flat pattern layout and strip layout modules. Strip layout of the system is designed by using fuzzy set theory. Process planning is determinated by fuzzy value according to several rules. Strip layout drawing generated in strip layout module is presented in 3-D graphic forms, including bending sequences and piercing processes with punch profiles divided into for external area. Results obtained using the modules enable the manufacturer for progressive working of electric products to be more efficient in this field.

• Steel and Composite Structures
• /
• 제36권3호
• /
• pp.273-291
• /
• 2020

Two-storey X-bracings are currently very popular in European practice, as respect to chevron and simple X bracings, owing to the advantages of reducing the bending demand in the brace-intercepted beams in V and inverted-V configurations and optimizing the design of gusset plate connections. However, rules for two-storey X braced frames are not clearly specified within current version of EN1998-1, thus leading to different interpretations of the code by designers. The research presented in this paper is addressed at investigating the seismic behaviour of two-storey X concentrically braced frames in order to revise the design rules within EN1998-1. Therefore, five different design criteria are discussed, and their effectiveness is investigated. With this aim, a comprehensive numerical parametric study is carried out considering a set of planar frames extracted from a set of structural archetypes that are representative of regular low, medium and high-rise buildings. The obtained results show that the proposed design criteria ensure satisfactory seismic performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.393-403
• /
• 1997

In this paper, we proposed an optimal identification method of identifying the membership func¬tions and the fuzzy rules for the stabilization controller of the nonlinear system by RVEGA( Real Variable Elitist Genetic Algo rithm l. Although fuzzy logic controllers have been successfully applied to industrial plants, most of them have been relied heavily on expert's empirical knowl¬edge. So it is very difficult to determine the linguistic state space partitions and parameters of the membership functions and to extract the control rules. Most of conventional approaches have the drastic defects of trapping to a local minima. However, the proposed RVEGA which is similiar to the processes of natural evolution can optimize simulta¬neously the fuzzy rules and the parameters of membership functions. The validity of the RVEGA - based fuzzy controller was proved through applications to the stabi¬lization problems of an inverted pendulum system with highly nonlinear dynamics. The proposed RVEGA - based fuzzy controller has a swing -. up control mode(swing - up controller) and a stabi¬lization one(stabilization controller), moves a pendulum in an initial stable equilibrium point and a cart in an arbitrary position, to an unstable equilibrium point and a center of the rail. The stabi¬lization controller is composed of a hierarchical fuzzy inference structure; that is, the lower level inference for the virtual equilibrium point and the higher level one for position control of the cart according to the firstly inferred virtual equilibrium point. The experimental apparatus was imple¬mented by a DT -- 2801 board with AID, D/A converters and a PC - 586 microprocessor.