• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6269-6273
• /
• 2015

Performance of the Alamouti algorithm based M-ary $2{\times}N$ OSTBC(Orthogonal Space Time Block Coded) MIMO(Multi Input Multi Output) system has been simulated varying two main parameters - the number of constellation(M), and the number of receiving antennas(N). Computer simulation has also been carried out using Matlab software for performance comparison between $2{\times}N$ MIMO and MRC(Maximal Ratio Combining) diversity antenna system to evaluate the degree of enhancement achieved through the use of Alamouti $2{\times}N$ MIMO. Under 10 dB EbNo QPSK scenario, $2{\times}1$ MIMO brought 4.2 dB BER improvement over single antenna system and $2{\times}2$ MIMO resulted in 7.4 dB BER improvement over $1{\times}2$ MRC.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.70-72
• /
• 2017

We proposed a multi-input multi-output automatic repeat request (MIMO-ARQ) scheme using double multi-strata space-time code (D-MSSTC) for high spectral efficiency in $4{\times}N_r$ MIMO systems. To improve error performance of the proposed scheme, we allocate power and phase to each layer of MSSTC over every transmission. Additionally, we suboptimally optimize power allocation to maximize the minimum coding gain distance of D-MSSTC and phase allocation to efficiently minimize inter-layer interference in MSSTC. In simulation results, it is observed that the proposed MIMO-ARQ scheme based on D-MSSTC shows better block error rate (BLER) performance than conventional schemes.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.201-208
• /
• 2005

Tn this paper, we evaluate the peak-to-average power ratio (PAPR) performance in a space-time block code (STBC) multi-input multi-output orthogonal frequency division multiplexing (MIMO-OFDM) system using selected mapping (SLM) and partial transmit sequences (PTS) approaches. SLM and PTS methods are used to decrease the nonlinear distortion and to improve the power efficiency of the nonlinear high power amplifier(HPA) in the MIMO-OFDM system. In simulation result, when compared with the existing MIMO-OFDM system using QPSK, the PTS method reduces the PAPR about 5dB while the SLM method can reduce about 3.5 dB. Also, we find the BER performance of the MIMO-OFDM system with and without the predistorter in front of the HPA. When the predistorter is used, the input back-off (IBO) of 4 dB is required in the PTS method, and IBO of 6 dB in the SLM method to closely conform to the linear amplifier. If the method of improving the PAPR is not used, the value of IBO of 8 dB is required.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2797-2820
• /
• 2015

In order to accommodate huge number of antennas in a limited antenna size, a large scale antenna array is expected to have a three dimensional (3D) array structure. By using the Active Antenna Systems (AAS), the weights of the antenna elements arranged vertically could be configured adaptively. Then, a degree of freedom (DOF) in the vertical plane is provided for system design. So the three-dimension MIMO (3D MIMO) could be realized to solve the actual implementation problem of the massive MIMO. However, in 3D massive MIMO systems, the pilot contamination problem studied in 2D massive MIMO systems and the inter-cell interference as well as inter-vertical sector interference in 3D MIMO systems with vertical sectorization exist simultaneously, when the number of antenna is not large enough. This paper investigates the interference management towards the above challenges in 3D massive MIMO systems. Here, vertical sectorization based on vertical beamforming is included in the concerned systems. Firstly, a cooperative joint vertical beams adjustment and pilot assignment scheme is developed to improve the channel estimation precision of the uplink with pilots being reused across the vertical sectors. Secondly, a downlink interference coordination scheme by jointly controlling weight vectors and power of vertical beams is proposed, where the estimated channel state information is used in the optimization modelling, and the performance loss induced by pilot contamination could be compensated in some degree. Simulation results show that the proposed joint optimization algorithm with controllable vertical beams' weight vectors outperforms the method combining downtilts adjustment and power allocation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.564-571
• /
• 2015

In this paper, we propose a multiple-input, multiple-output(MIMO) interferometric radar network system to generate three-dimensional (3-D) MIMO interferometric inverse synthetic aperture radar(InISAR) image. In the MIMO interferometric radar network system, the MIMO InISAR image can be formed by an incoherent summation of multiple bistatic InISAR images that show 3-D scatterers of a target observed at different bistatic interfermetric configurations, respectively. Because bistatic-sccattering physics of a target at different viewpoints are visible in the 3-D MIMO InISAR image, it can provide various scatterering physics properties of a target, and can be used for target classification as a useful feature vector. Simulations validate that our proposed method successfully finds locations of scatterers of a target in MIMO radar interferometric network system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.127-134
• /
• 2015

In this paper, we propose 2.6 GHz single band dual polarization MIMO omni antenna for in-building applications. The proposed antenna operates at 2.6 GHz single LTE band, Up-link 2.52~2.54 GHz and Down-link 2.64~2.66 GHz. Horizontal and vertical polarizations of the antenna has been, respectively, constructed by the synthesis of four folded loop antennas and the folded monopole antenna. The height of the MIMO omni-directional antenna is minimized to be less than ${\lambda}/13.5$ from the ground. The measurement results show excellent MIMO omni antenna performance of 2.85 dBi vertical polarization gain, 2.29 dBi horizontal polarization gain, and 19.25 dB port isolation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.9
• /
• pp.987-992
• /
• 2015

In this paper, neutralization line structure have been employed to improve the isolation between the MIMO antenna system. The proposed MIMO antenna size is $116mm{\times}64mm{\times}5mm$ and designed on FR-4(${\varepsilon}r=4.4$) ground substrate. Neutralization line was applied to enhance isolation between the each antenna elements. The fabricated antenna satisfied a VSWR below 3 in LTE band B13 and the isolation between the MIMO antenna system is presented below -15dB. On the H-plane, antenna shows an omnidirectional pattern. In LTE band B13, the antenna presents a gain of a -2.6dBi ~-1.18dBi and radiation efficiency of 33.49% ~ 46.45%. Comparing measurement result with the outcome of simulation, the proposed MIMO antenna is expected to be applied for mobile application.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.78-86
• /
• 2013

A hybrid MIMO(Multi Input Multi Output) antenna which is operating both a monopole and a IFA(Inverted F Antenna) is designed. It's applied Vlade(Vertical lade) technique to reduce antenna space, and a diagonally fed MIMO antenna is designed on the bare board for the data communication. Return losses due to variables of antenna length are simulated for the design. Antenna for the hexa-frequency band of LTE700, CDMA, GSM, DCS, PCS and WCDMA is designed and implemented. This antenna is satisfied 3:1 VSWR over the whole design band by the measurement of return loss. And average gains and efficiencies were -3.67 ~ -2.53dBi and 42.06 ~ 55.84% for LTE700/CDMA/GSM frequency band, -3.27 ~ -1.21dBi and 47.08 ~ 75.6% for DCS/PCS/WCDMA frequency band. The isolation between 2 antenna that is one of important factors for the MIMO system was measured good performance as -8.14 ~ -25.77dB over the whole service band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1209-1216
• /
• 2008

In order to maximize spectrum efficiency and data rate MIMO(Multiple Input Multiple Output) is adopted to wireless system. OFDM-based WiMAX and LTE accommodate MIMO as mandatory technology. STC(Space Time Coding) and SM(Spatial Multiplexing) are used in downlink while in uplink C-MIMO(Collaborative MIMO) is used to improve data throughput. In this paper conventional pairing schemes, RPS(Random Pairing Scheduling) and DPS(Determinant Pairing Scheduling) are analyzed. From the analysis the performance of DPS algorithm is better than that of RPS because DPS measures orthogonal factor between paired users. However, there are potential problems such as hardware complexity and performance. To overcome the issues Power-Based Scheduling(PBS) algorithm is proposed for C-MIMO. PBS can provide higher performance compared to RPS and dramatically reduce hardware complexity compared to DPS

• ETRI Journal
• /
• v.45 no.4
• /
• pp.581-593
• /
• 2023

This paper proposes four-ring slot resonator-based MIMO antennas of 75×150 mm² without and with CSRR structures in the sub-6-GHz range. These orthogonal-fed antennas have shown diverse characteristics with dual polarization. L-shaped parasitic structures have increased the isolation (i.e., >40 dB) in the single-element antenna over the band of 3.4 GHz-3.8 GHz. A set of three CSRR structures in the MIMO antenna reduced the coupling between antenna ports placed in an inline arrangement and enhanced the isolation from 12 dB to 20 dB and the diversity characteristics. The S-parameters of both MIMO antennas are measured and used to evaluate MIMO parameters like ECC, TARC, MEG, and channel capacity loss. The simulation results show the variations in the gain and directivity on exciting linear and dual polarizations. The diversity performance of the reported MIMO antennas is suitable for 5G applications.