• Geophysics and Geophysical Exploration
• /
• v.2 no.2
• /
• pp.96-103
• /
• 1999

Most of saline water inousions have been diagnosed by geophysical or geochemical approach independently. The objective of this study is to provide the effective method to detect the saline water intrusion on the ground water in the vicinity of seashore using these two methods. Schulumberger sounding, frequency domain electromagnetic sounding and geochemical analysis of ground water were carried out to explore saline water intrusion. Schulumberger sounding was implemented in dry surface condition before irrigation water was introduced into the field, while electromagnetic sounding was carried out in wet ground condition after the irrigation. The purpose of duplicated measurements on the equivalent spot at different times was to investigate the variation of anomaly zone depending on the amount of ground water. It was possible to discriminate the anomalous zone due to high water saturation from the low electric resistivity zone by high salt concentrations through this way. For the verification of the geophysical result, the ground water samples in the study area were collected and analysed at the 23 points near the measuring spots. The groundwater at the spot nearest to the sea water intrusion identified by geophysical method indicates higher salinity than the standard limit concentration for agricultural irrigation water (250 mg/1). Isotope analysis of $D({^2}H)$ vs. is ${^18}O$ and PCA analysis were used to discriminate the anthropogenic pollution from those of high salinity from sea water intrusion.

• Journal of Periodontal and Implant Science
• /
• v.26 no.4
• /
• pp.889-905
• /
• 1996

It is known that growth factors function as potent biologic mediators regulating numerous activities of wound healing via cell proliferation, migration and extracellular matrix formation and they also promote periodontal regeneration. But, method of growth factor application is controversial yet. So purpose of this study is to evaluate the effect of demineralized root surface as one of method of growth factor application. The ginigival fibroblasts were primary cultured and fifth or sixth subpassages were used in these experiments. In first experiment, root surface blocks demineralized with 100mg/ml tetracycline for 5 minutes and pH 1 citric acid for 3 minutes(experimental groups) and nonteminerilized root surface blocks (control groups) were placed in 100ng/ml PDGF-BB for 5 minutes. Then the cells were seeded on each root surface blocks and cultured for 6, 24, 48, 72 hours. In second experiment, root surface blocks deminerilized with tetracycline and citric acid and nondemineralized root surface blocks were placed in 200ng/ml PDGF-BB for 5 minutes and another non-demineralized root surfcae blocks were placed in DMEM without PDGF-BB. At 1, 2, 4, 6, 8 days, the cells were seeded in 24-well plate and using of each eluent, cultured for 72 hours. The results of the four determinants were presented as mean and S.D.. The results were as follows : The attachment and proliferation of human gingival fibroblast on root surface were more increased when PDGF-BB was applicated on root surfrace demineralized with tetracycline or citric acid than non-demineralized root surface. And, in comparision tetracycline with citric acid, there were more attachment and proliferation of human gingival fibroblast on root surface demineralized with tetracycline than citric acid, and proliferation of human gingival fibroblast on demineralized root surface was increased time dependently 1 day to 3 days. In second experiment using eluent, proliferation of human gingival fibroblast was more increased to 6 days when human gingival fibroblast was cultured in eluent that PDGF-BB was applicated on demineralized root surface than two control groups, and degree of proliferation was decreased time dependently 1 day to 6 days. Proliferation of human gingival fibroblast cultured in eluent without PDGF-BB was constant 1 day to 6 days. After 6 days, degree of proliferation of human gingival fibroblast was similar in four groups. This means that release duration of PDGF-BB from demineralized root surface is 6 days. And in comparision tetracycline with citric acid, there was more proliferation of human gingival fibroblast in tetracycline-treated group than citric acid. In conclusion, demineralized root surface as primary site for PDGF-BB application, especially demineralized with tetracycline has important roles in attachment and proliferation of human gingival fibroblast, and may be useful clinical applications in periodontal regenerative procedures.

• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.192-198
• /
• 2015

This study was performed in order to analyze the fibrinolytic, thrombin inhibitory, anti-oxidative, acetylcholinesterase inhibitory, and immuno-enhancing activities of the water extract and solvent fractions isolated from Grifola frondosa. Fibrinolytic activity was analyzed using the fibrin plate method, and thrombin inhibitory activity was assayed using the substrate H-D-Phe-piparg- pna. Anti-oxidative activity was estimated using the DPPH assay, and AChE inhibitory activity was measured using the spectrophotometric method. Immuno-enhancing activity was examined using the nitric oxide (NO) production in RAW 264.7 macrophage cells. Cell viability was determined using the MTS assay. Fibrinolytic activities were the highest in water extract (1.55 plasmin units/mL) followed by water fraction (0.85 plasmin units/mL). The thrombin inhibitory activities of the water and ethyl acetate fractions were determined to be 76.43% and 72.59%, respectively. The acetylcholinesterase inhibitory activities of chloroform and hexane fractions exhibited values of 95.14% and 94.74%, respectively. The butanol fraction showed the highest anti-oxidative activity at 94.47%. Anti-proliferating activity against Raw 264.7 cells showed no cytotoxicity. The production of NO in Raw 264.7 cells increased up to 2-fold by adding the water fraction compared to the untreated control. These results suggest that Grifola frondosa may serve as a useful functional food for the enhancement of immune function and the prevention and therapy of cardiovascular diseases.

• Food Science of Animal Resources
• /
• v.21 no.2
• /
• pp.149-155
• /
• 2001

The aims of this study were to examine contamination sources and provide the basic data in establishment of sanitary standard for raw pork meat. From \"Random sampling(I)\", initial total plate counts of post-slaughter samples for the group A, B and C were 1.5${\times}10^4$cfu/$textrm{cm}^2$, 5.5${\times}10^5$cfu/$textrm{cm}^2$ and 1.8${\times}10^4$cfu/$textrm{cm}^2$, respectively, and of post-prechilling samples for the group A, B and C were 1.0${\times}10^4$cfu/$textrm{cm}^2$, 4.6${\times}10^5$cfu/$textrm{cm}^2$ and 2.5${\times}10^4$cfu/$textrm{cm}^2$, respectively. Initial total plate counts of post-transportation samples for the group D, E and F did not increased, as did the group A, B and C. From \"Normal sampling(II)\", initial total plate counts of post-slaughter, post-prechilling, post-transportation and post-2 days preservation samples were 7.3${\times}10^4$cfu/$textrm{cm}^2$, 9.6${\times}10^4$cfu/$textrm{cm}^2$, 2.0${\times}10^5$cfu/$textrm{cm}^2$ and 2.5${\times}10^5$cfu/$textrm{cm}^2$, respectively. From \"Clean sampling(III)\", initial total plate counts of post-slaughter, post-prechilling, post-transportation and post-2 days preservation samples were decreased to 7.0${\times}10^2$cfu/$textrm{cm}^2$, 7.5${\times}10^2$cfu/$textrm{cm}^2$, 8.5${\times}10^2$cfu/$textrm{cm}^2$ and 5.5${\times}10^3$cfu/$textrm{cm}^2$, respectively, compared with "Normal sampling(II)". No E. coli O157:H7, Staphylococcus aureus and Salmonella were detected at each sampling step. Consequently, a slaughter method like "Clean sampling(III)" showed a better sanitary effect to low total plate counts of 10$^2$∼10$^3$times, compared with "Normal sampling(II)". The one of contamination sources for raw pork meat was at a slaughtering step, and "Clean sampling" method may be considered as the one of sanitary standards.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.175-182
• /
• 2008

This study is concerned with the evaluation of the corrosion resistance of coated semiconductor equipment parts with various processes. To select the appropriate basis for evaluation, replacement parts were observed during the semiconductor manufacturing process. This study also ran a dry corrosion test using $Al_2O_3$, which is mostly used as a coating material. This test quantitatively measured the efficiency of coated parts. Surface morphology, leakage current and breakdown voltage were also evaluated. This study showed that a dry corrosion process led to the drop of electrical properties, for example, the leakage current increase and the dielectric strength decrease. The surface morphology test displayed that surface damage is largely dependent on the exposure time to corrosive environments. By using the values that changed during the corrosion process, it may be possible to contrive a method to evaluate the efficiency of coated parts with various processes.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.138-148
• /
• 2013

Purpose: Determining an appropriate path is a top priority in order for a robot to maneuver in a dynamically efficient way especially in a pick-and-place task. In a non-standardized work environment, current robot arm executes its motion based on the kinematic displacements of joint variables, though resulting motion is not dynamically optimal. In this research we suggest analyzing and applying motion patterns of the human arm as an alternative to perform near optimum motion trajectory for arbitrary pick-and-place tasks. Methods: Since the motion of a human arm is very complicated and diverse, it was simplified into two links: one from the shoulder to the elbow, and the other from the elbow to the hand. Motion patterns were then divided into horizontal and vertical components and further analyzed using kinematic and dynamic methods. The kinematic analysis was performed based on the D-H parameters and the dynamic analysis was carried out to calculate various parameters such as velocity, acceleration, torque, and energy using the Newton-Euler equation of motion and Lagrange's equation. In an attempt to assess the efficacy of the analyzed human motion pattern it was compared to the virtual motion pattern created by the joint interpolation method. Results: To demonstrate the efficacy of the human arm motion mechanical and dynamical analyses were performed, followed by the comparison with the virtual robot motion path that was created by the joint interpolation method. Consequently, the human arm was observed to be in motion while the elbow was bent. In return this contributed to the increase of the manipulability and decrease of gravity and torque being exerted on the elbow. In addition, the energy required for the motion decreased. Such phenomenon was more apparent under vertical motion than horizontal motion patterns, and in shorter paths than in longer ones. Thus, one can minimize the abrasion of joints by lowering the stress applied to the bones, muscles, and joints. From the perspectives of energy and durability, the robot arm will be able to utilize its motor most effectively by adopting the motion pattern of human arm. Conclusions: By applying the motion pattern of human arm to the robot arm motion, increase in efficiency and durability is expected, which will eventually produce robots capable of moving in an energy-efficient manner.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.310-313
• /
• 2009

Several high nitrogen stainless steel ingots(100kg) were fabricated with changing Ni and $[N]_2$ contents by Pressurized Vacuum Induction Melting(P_VIM). After free forging process, chemical compositions, microstructure and mechanical properties were estimated. Hardness was increased with the increase of $[N]_2$ content. Furthermore, microstructure including a lot of tempering twins was observed with optical microscope. Mechanical properties were estimated as function of solution treatment temperature and cooling method(air/water) under duration time of 1 hr on sample that were fabricated with Ni content under the atmospheric $[N]_2$ pressure. At solution treatment range of $1050{\sim}1100^{\circ}C$, hardness was decreased with the increase of solution temperature and there were little discrepancy of microstructure and hardness with cooling method. Computer simulation was carried out in order to inspect pass schedule in cold rolling process. When the condition of simulation was roll speed of 2.5mpm, rolling rate $15{\sim}17%$ per pass, it was ascertained that the formation such as deformation by sticking and lamellar sliver etc. was restricted from a simulation.

• Korean Journal of Digital Imaging in Medicine
• /
• v.5 no.1
• /
• pp.32-44
• /
• 2002

The role of radiology department has been greatly increased in the past few years as the technology in the medical imaging devices improved and the introduction of PACS (Picture Archiving and Communications System) to the conventional film-based diagnostic structure is a truly remarkable factor to the medical history. In addition, the value of using digital information in medical imaging is highly expected to grow as the technology over the computer and the network improves. However, the current medical practice, using PACS is somewhat limited compared to the film-based conventional one due to a poor image quality. The image quality is the most important and inevitable factor in the PACS environment and it is one of the most necessary steps to more wide practice of digital imaging. The existing image quality control tools are limited in controlling images produced from the medical modalities, because they cannot display the real image changing status. Thus, the image quality is distorted and the ability to diagnosis becomes hindered compared to the one of the film-based practice. In addition, the workflow of the radiologist greatly increases; as every doctor has to perform his or her own image quality control every time they view images produced from the medical modalities. To resolve these kinds of problems and enhance current medical practice under the PACS environment, we have developed a program to display a better image quality by using the ROI optical density of the existing gray level values. When the LUT is used properly, small detailed regions, which cannot be seen by using the existing image quality controls are easily displayed and thus, greatly improves digital medical practice. The purpose of this study is to provide an easier medical practice to physicians, by applying the technology of converting the H-D curves of the analog film screen to the digital imaging technology and to preset image quality control values to each exposed body part, modality and group of physicians for a better and easier medical practice. We have asked to 5 well known professional physicians to compare image quality of the same set of exam by using the two different methods: existing image quality control and the LUT technology. As the result, the LUT technology was enormously favored over the existing image quality control method. All the physicians have pointed out the far more superiority of the LUT over the existing image quality control method and highly praised its ability to display small detailed regions, which cannot be displayed by existing image quality control tools. Two physicians expressed the necessity of presetting the LUT values for each exposed body part. Overall, the LUT technology yielded a great interest among the physicians and highly praised for its ability to overcome currently embedded problems of PACS. We strongly believe that the LUT technology can enhance the current medical practice and open a new beginning in the future medical imaging.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.559-565
• /
• 2003

An analytical method the determination of benzo(a)pyrene (BaP) and its hydroxylated metabolites, 1-hydroxybenzo(a)pyrene (1-OHBaP), 3-hydroxybenzo(a)pyrene (3-OHBaP), benzo(a)pyrene-4,5-dihydrodiol (4,5-diolBaP) and benzo(a)pyrene-7,8-dihydrodiol (7,8-diolBaP), in rat urine and plasma has been developed by HPLC/FLD and GC/MS. The derivatization with alkyl iodide was employed to improve the resolution and the detection of two mono hydroxylated metabolites, 1-OHBaP and 3-OHBaP, in LC and GC. BaP and its four metabolites in spiked urine were successfully separated by gradient elution on reverse phase ODS $C_{18}$ column (4.6 mm I.D., 100 mm length, particle size 5 ㎛) using a binary mixture of MeOH/H₂O (85/15, v/v) as mobile phase after ethylation at 90 ℃ for 10 min. The extraction recoveries of BaP and its metabolites in spiked samples with liquid-liquid extraction, which was better than solid phase extraction, were in the range of 90.3- 101.6% in n-hexane for urine and 95.7-106.3% in acetone for plasma, respectively. The calibration curves has shown good linearity with the correlation coefficients (R²) varying from 0.992 to 1.000 for urine and from 0.996 to 1.000 for plasma, respectively. The detection limits of all analytes were obtained in the range of 0.01-0.1 ng/mL for urine and 0.1-0.4 ng/mL for plasma, respectively. The metabolites of BaP were excreted as mono hydroxy and dihydrodiol forms after intraperitoneal injection of 20 mg/kg of BaP to rats. The total amounts of BaP and four metabolites excreted in dosed rat urine were 3.79 ng over the 0-96 hr period from adminstration and the excretional recovery was less than 0.065% of the injection amounts of BaP. The proposed method was successfully applied to the determination of BaP and its hydroxylated metabolites in rat urine and plasma for the pharmacokinetic studies.

• Korean Journal of Animal Reproduction
• /
• v.14 no.4
• /
• pp.237-244
• /
• 1990

These studies were carried out to investigate the effects of the follicles size, hormone supplementation, semen types and capacitation methods on in vitro maturation and fertilization of bovine follicular oocytes. The ovaries were obtained from slaughtered Korean Native cows. The follicular oocytes surrounded with cumulus cells were recovered by aspirating follicular fluid from the visible follicles of diameter 3~5mm. The follicular oocytes were cultured in TCM-199 medium containing hormones, FCS, ECS, BFF and MCC for 24~48hrs. in a incubator with 5% CO2 in air at 38.5$^{\circ}C$ and then matured oocytes were again cultured for 18~20hrs. with motile capacitated sperm in the TCF(Tyroide calcium-free) solution containing 200$\mu\textrm{g}$/ml of heparin. The results obtained in these experiments were summarized as follows : 1. The oocytes classified as "A, B, C, D and Degenerative" depending morphological integrity and those were 61.4%, 12.1%, 19.2%, 4.2% and 3.0% of the total oocytes recovered, respectively. The maturation and fertilization rate of the A, B, C class follicular oocytes, cultured in the TCM-199 medium supplemented with 10% FCS were 89.1%, 78.0%, 52.6% and 78.1%, 66.1%, 33.3%, respectively. 2. The average number of the follicular oocytes recovered from follicles size, 1~2mm, 3~5mm and above 5mm in dimeter were 67, 98 and 63, respectively. The maturation and fertilization rate of the follicular oocytes, cultured in the TCM-199 medium were 56.7%, 82.5%, 46.0% and 44.8%, 71.4%, 28.6%, respectively. 3. The maturation and fertilization rate of follicular oocytes, cultured in the TCM-199 medium supplemented with 5%, 10%, 15%, 20% FCS and hCG, HCG, $\beta$-estradiol were 76.0%~82.3% and 26.2%~70.0%, and those values were higher the supplementation of the hormone than the non-supplementation. 4. The fertilization and cleavage rate of the follicular oocytes, inseminated with spermatozoas of epididymis cauda, neat and frozen semen were 63.3%, 73.3%, 70.0% and 32.7%, 37.8%, 38.3, respectively. 5. The fertilization and cleavage rate of follicular oocytes, fertilized with capacitated spermatozoas by heparin, BFF and HIS methods were 70.0%, 53.8%, 34.2% and 38.3%, 23.1%, 17.1%, respectively. And the fertilization and cleavage rate were higher method of heparin than other methods.r methods.