• Journal of the Korea Computer Graphics Society
• /
• v.7 no.2
• /
• pp.11-19
• /
• 2001

This paper proposes a colored paper mosaic rendering technique based on image segmentation that can automatically generate torn and tagged colored paper mosaic effect. and 3D effect that come about in human-made mosaic work can be represented by generating shadow using difference of paper thickness. Previous method did not produce satisfactory results due to the ineffectiveness of having to use pieces of the same size. The proposed two methods for determination of paper shape and location that are based on segmentation can subdivide image area by considering characteristics of image. The first method is to generate Voronoi polygon after subdividing the segmented image again using quad tree. And the second method is to apply the Voronoi diagram on each segmentation layer. Through these methods, the characteristic of the image is expressed in more detail than previous colored paper mosaic rendering method and these methods enable to produce image that is closer to human-made mosaic work.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.8
• /
• pp.879-885
• /
• 2008

A rotordynamic analysis was performed with a decant-type centrifuge, which is a kind of industrial centrifuge. The system is composed of screw rotor, bowl rotor, driving motors, gear box, and support rolling element bearings. These rotors have a rated speed of 4300 rpm, and were modeled utilizing a rotordynamic FE method for analysis, which was verified through 3-D FE analysis. Design goals are to achieve wide separation margins of lateral critical speeds, and favorable unbalance responses of the rotor in the operating range. Then, a complex analysis rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds and mode shapes, whirl natural frequencies, and unbalance responses under various balance grade. As a result of analysis, the rotordynamic analysis performed by separating a screw rotor and bowl rotor may cause an error in predicting critical speed of entire system. Therefore, the rotordynamic analysis of a coupled rotor combining a screw and bowl rotor must be performed in order to more accurately estimate dynamic characteristics of the decanter-type centrifuge as presented in this paper. Also, rolling element bearings with suitable stiffness should be selected to keep enough separation margin. In addition, in establishing balance grade of a screw and bowl rotor, ISO G2.5 balance grade is more recommended than ISO G6.3, in particular balancing correction of a screw rotor based on ISO G2.5 grade is strongly recommended.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.3 s.42
• /
• pp.47-54
• /
• 2007

A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modem semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element bearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through the results of its 3-D finite element model. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated determinately and indeterminately by considering the generalized forces of the gear action as well as the rotor itself. Each resultant bearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, and unbalance responses under various unbalance locations. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1565-1572
• /
• 2006

Recently with the ever increasing growth of data communication, the need for security and privacy has become a necessity. The advent of wireless communication and other handheld devices like Personal Digital Assistants and smart cards have made the implementation of cryptosystems a major issue. The Cellular Automata(CA) can be programmed to implement hardware sharing between the encryption and decryption. In this paper, we give conditions for a linear hybrid cellular automata with 60, 102 or 204 to be a linear hybrid group cellular automata C. And we present the conditions which the complemented hybrid group cellular automata C' with complement vectors derived from C has maximum equal lengths in the state transition diagram of C' Also we analyze the relationship among cycles of C' These results generalize Mukhopadhyay's results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.68-77
• /
• 1990

In this paper, a neural patten recognition method for the automatic circuit diagram reading system is proposed. The proposed procedure to recognize a deformed logic symbols is composed of three stages: feature detection, log mapping, and pattern classification. In the feature detection stage, a modified competitive learning algorithm where each pattern has the inhibition weight as well as the activation weight is developed. The global information of hand-written logic symbols is obtained by the feature detection neural network having both the inhibition and activation weights. The obtained global data is then transformed into a log space by the conformal mapping where according to the Schwartz's theory about the human visual signal process-ing, the degree of rotation and the scale change are mapped into the translation change. Logic symbols are finally classified by a three layer perceptron trained by the error back propagation algorithm. The computer simulation demonstrates that the proposed multistage neural network system can recognize well the deformed patterns of hand-written logic circuit diagrams.

• Progress in Superconductivity
• /
• v.11 no.2
• /
• pp.83-86
• /
• 2010

There are theoretical and experimental evidences for the pseudo-gap in electron doped cuprates being due to interaction between electrons and anti-ferromagnetism(AFM). A remaining issue is on how AFM correlates with pseudo-gap, and eventually with superconductivity. To elucidate the issue, we have performed temperature dependent angle-resolved photoemission studies of an e-doped cuprate superconductor $Sm_{2-x}Ce_xCuO_4$(SCCO) x=0.18 at 20K and 150K. In the case of $Nd_{2-x}Ce_xCuO_4$, the most well known e-doped cuprate, pseudo-gap disappears at around 100 K for x=0.17. Our experimental result reveals that the pseudo-gap of SCCO exists even at 150K for x=0.18. This result implies that the AFM of SCCO survives even in x=0.18, which agrees with previously reported phase diagram of SCCO. Yet, the superconductivity disappears around x=0.18 for both NCCO and SCCO in spite of the difference in the magnetic order. This result sheds a light on the disappearance of superconductivity on the over-doped side.

• Preventive Nutrition and Food Science
• /
• v.13 no.4
• /
• pp.306-312
• /
• 2008

This study investigated the influence of pH on the color development of melanoidins formed from amino acid enantiomer model systems. For this, the color development was evaluated by measuring browning at 420 nm and color measurements by spectrophotometry and colorimetry. The browning and browning index showed no difference according to the type of amino acid enantiomers, while that formed from the D-Asn system was the only difference according to pH level. The tristimulus value of melanoidins formed from all model systems was located on a dominant wavelength of 475 nm, the blue zone of the diagram. In addition, the $L^*$, $a^*$, $b^*$, $C^*_{ab}$ values, and ${\Delta}E^*$ index on the basis of the type of amino acid enantiomers, the differences were markedly found at pH 4.0. At pH 7.0, significantly differences were found in the $L^*$, $a^*$, $b^*$ values, and ${\Delta}E^*$ index and not in the case of the lysine enantiomers. In addition, at pH 10.0, the differences were found in the $a^*$ and $b^*$ values from the lysine enantiomers and $C^*_{ab}$ value from the asparagine enantiomers. Therefore, the color development of melanoidins was influenced by the type of amino acid enantiomers and pH levels. Especially, it is thought that the $a^*$ and $b^*$ values can be used to explain the differences among the amino acid enantiomers in the color development of melanoidins.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.961-967
• /
• 2011

The objective of this study was to develop a new method for estimating gas interchangeability for 13A gas appliances. The three basic principles for the development of this method are as follows: 1) to derive the secondary interchangeability factor that represents the effect of gas composition, in addition to the major interchangeability factor, i.e., Wobbe index; 2) to test every type of and each maker's domestic gas appliances that are widely used in our country, particularly including premixed gas appliances; and 3) to develop a simple estimation method. On the basis of these principles, thirty representative gas appliances were tested, and as a result, a simple two-dimensional interchangeability diagram consisting of Wobbe index and relative density was developed. Unlike conventional methods for estimating interchangeability, this method can be applied to premixed gas appliances, which have a narrow stable flame range, and the interchangeability range of this method then becomes narrower than that of the conventional methods.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.362-374
• /
• 2010

Product Lifecycle Management (PLM) is an integrated business approach to manage the creation and distribution of product information throughout the product development process. From the product perspective, PLM encompasses a holistic approach to product development and product information management. It supports the integrated product information in conjunction with the efficient product structures and BOM (Bill Of Material), user interfaces, proper functions, design processes and enterprise integration. Therefore, PLM should not only satisfy required functions as an enterprise software but also offer a systematic method for the efficient application from the initial stage of its development. Recently, many shipyards have been considering the PLM as a strategic solution to get the efficient management of product information such as 3-D models, BOM, drawings, documents, and the other product data. Though many studies on PLM are performed, most of them are performed in a function-based approach adequate for mass productive assembly industries. It could not help having limitations on applying the proper PLM system to the shipbuilding business since the requirements of shipbuilding PLM are too diverse and huge to design the architecture. This study presents the PLM framework which effectively reflects the diverse requirements of shipbuilding PLM. In order to get the macroscopic architecture of shipbuilding PLM, authors suggest the four-tier architecture model which considers the various requirements collected from shipyards. Entities of ship design data are modeled BOM in terms of product structure and hierarchical class diagram. Applicable functions of shipbuilding PLM are also investigated by analysis of issues of ship design. Finally, by reflecting the design process of shipbuilding, To-Be ship design procedure cooperated with the suggested PLM framework has been summarized.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.56-56
• /
• 2009

AISI 316L 스테인리스강에 새롭게 디자인한 서로 다른 3가지 응고모드를 가진 와이어로 FCAW(Flux Cored Arc Welding)을 하였다. 각각의 3가지 와이어는 Pseudobinary phase diagram에 따라 AF, FA, F모드를 가졌다. 미세조직은 $Cr_{eq}/Ni_{eq}$이 증가할수록 델타 페라이트 함량이 증가하였으며, 초정 상의 경우 초정 오스테나이트에서 초정 페라이트로 변태하였고, 연성저하균열의 민감도가 감소하였다. 연성저하균열은 이동결정립계의 형상에 따라 좌우되며, 미량의 페라이트를 함유한 오스테나이트에서는 페라이트가 핀(Pin) 역할을 제대로 하지 못하여 직선형태의 이동 결정립계 따라 입계 미끄러짐의 메커니즘을 통해 전파되었으며, 곡선형태의 이동 결정립계에서는 델타 페라이트가 핀 역할을 하여 역할을 하여 구속 상태에서 응력집중을 막고 응력을 분산시켜 균열이 전파되는 것을 방해하여 균열이 발생되지 않았다.