• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.25-32
• /
• 1998

The emulsion stability of W/O emulsion prepared by D phase emulsification during storage and handling is studied by using phase diagrams. The process of D phase emulsification begins with the formation of isotropic surfactant solution, followed by formation of oil-in-surfactant (O/D) gel emulsion by dispersion of octamethylcyclotetrasiloxane(OMCS) in the surfactant solution. Polyols were essential components for this purpose. To understand the function of polyols, the solution behavior of nonionic surfactant/oil/water/polyol systems were investigated by the ternary phase diagrams of polyoxyethylene oleyl ether/OMCS/propylene glycol(PG) aqueous solutions. The addition of PG increased the solubility of oil in the isotropic surfactant phase. D phase emulsification method has been applied to a new type of cosmetics. By using this emulsification technique, O/W emulsion were formed without a need for adjust of HLB. Fine and stable W/O emulsions were prepared by D phase emulsion.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.4
• /
• pp.263-270
• /
• 2012

Ascorbic acid (Vitamin C) becomes unstable in the aqueous phase by oxygen, light and alkali, etc. The properties are limited in application to cosmetics. The most important factor that determines the destabilization of ascorbic acid in the aqueous phase was tried to understand considering its molecular deformation and degradation. In this study, we changed the polyols and emulsification technique for the stability of ascorbic acid. Then we observed the color and concentration change of ascorbic acid at room temperature and high temperature ($42^{\circ}C$) for 6 weeks and identified the stability using HPLC regularly. As a result, we found that glycerin was the most appropriate polyol for stability of the ascorbic acid. Also the technique of nonaqueous emulsification stabilized ascorbic acid than P/S emulsification. Also, P/S emulsification, glycerin was more stable than propylene glycol. By the results we suggest that ascorbic acid could be stabilized by nonaqueous emulsification method and this data could be applied to stabilization methods for cosmetic products.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.809-813
• /
• 1999

D phase emulsification has been developed and elucidated the emulsification mechanism by using phase diagrams. The process of D phase emulsification begins with the formation of isotropic surfactant solution, follows by formation of oil-in-surfactant (O/D) gel emulsion by dispersion of octamethylcyclotetra siloxane(OMCS) in the surfactant solution. Polyols were essential components for this experiments. To understand the function of polyols, the solution behaviors of nonionic surfactant/oil/water/polyol systems were investigated by the ternany phase diagrams of polyoxyethylene oleyl ether/OMCS/propylene glycol(PG) aqueous solutions. The solubility of oil in the isotropic surfactant phase was increased with the addition of PG. D phase emulsion was formed in the range of 70~90% of OMCS and 2.0~3.0 dyne/cm of interfacial tension and the structure was homogenious spherical and O/W type and its diameter was about $10{\mu}m$.

• Macromolecular Research
• /
• v.17 no.3
• /
• pp.168-173
• /
• 2009

This study reports the preparation and characterization of nanohydrogels by using sodium alginate as a model material. Alginate nanohydrogels (ANH) were prepared by emulsification-diffusion method in a w/o system with 1,2-diacyl-sn-glycero- 3-phosphocholin as the lipophilic surfactant. The effects of the alginate to surfactant ratio and the remaining water contents on the mean particle size and swellability of ANHs were investigated in terms of the concentration, agitation speed, and agitation time. The feasibility of using nanohydrogels and their controllability were proved by the water the absorbency of ANHs during a 7-day evaluation by dynamic light scattering. In this work, the mean particle sizes of ANHs could be controlled from 49.2 nm (measured in ethanol phase) to $1.9{\mu}m$ (measured in water phase, after 7 days of water absorption).

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.299-306
• /
• 2009

The purpose of this study was to prepare stable water-in-corn oil (W/O) emulsion droplets coated by polyglycerol polyricinoleate (PGPR). W/O emulsions (20 wt% aqueous phase, 80 wt% oil phase containing 8 wt% PGPR) were produced by high pressure homogenization (Emulsions 1), however, appreciable amount of relatively large water droplets (d>$10{\mu}m$) were found. To facilitate droplet disruption, viscosity of each phase was adjusted: (i) increased the viscosity of aqueous phase by adding 0.1 wt% xanthan (Emulsions 2); (ii) decreased the viscosity of oil phase and aqueous phase by heating them separately at $50^{\circ}C$ for 1 hr immediately before emulsification (Emulsions 3). Homogenizing at the elevated temperature clearly led to a smaller water droplet size, whereas xanthan neither improved nor adversely affected on the microstructures of the emulsions. In addition, the Emulsions 3 had good stability to droplet aggregation under shearing stress, thermal processing, and long term storage.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.3
• /
• pp.167-173
• /
• 2000

The process variables for the manufacture of translucent microemulsion prepared with 2-octyl dodecanol, 12-hydroxy stearic acid cholesteryl , POE(40)HCO and 1,3-butandiol were examined initially (primary emulsion) and following aging for three months. The techniques empolyed in this study were particle size, turbidity, interfacial tension and microfluidizer. Particle size analysis and turbidity measurement to evaluate the emulsion stability were used. It was concluded that the process of the emulsification was an important indicator of the stability of the translucent microemulsion. From the particle size and and turbidity measurement of translucent microemulsion, adding the surfactant to the oil phase before the emulsification was found to be the most important factor for the stability of emulsions. We found that interfacial tension of the adding the surfactant to the oil phase is lower than that of the adding the surfactant to aqueous phase. In spite of hydrophilic surfactant, adding the surfactant to aqueous phase produced inferior emulsion to that to oil phase.

• Membrane Journal
• /
• v.27 no.6
• /
• pp.511-518
• /
• 2017

The membrane emulsification (ME) is a technology for producing emulsions with narrow size distribution by using the well-defined porous membranes such as the SPG membrane. In this study, the preparation of polycaprolactone (PCL) microcapsules by using the multiple emulsions obtained from membrane emulsification method is studied. After the making of $W_1/O$ single emulsions by sonication method, then $W_1/O/W_2$ multiple emulsions are formed by premix-ME method. The PCL microcapsules impregnated with BSA model drug are prepared by solvent evaporating from $W_1/O/W_2$ multiple emulsions. The effects of various parameters such as the ratio of disperse/continuous phase (D/C ratio), the concentration of PCL, emulsifier and model drug and the transmembrane pressure on the size and distribution of PCL microcapsules are investigated. The uniform PCL microcapsules with about $5{\sim}6{\mu}m$ of mean size and 26% of BSA loading are obtained by the premix membrane emulsification.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.875-881
• /
• 1998

Microemulsion is prepared by the method of phase inversion emulsification with d-limonene that is environmental friendly substance and nontoxic to human body as dispersed phase. Emulsifier used for preparation of microemulsion is nonionic surfactants, polyoxyethylene nonylphenyl ether. Stability of prepared microemulsion was estimated by the various method of ξ-potential, hydrodynamic diameter and electric conductivity. When d-limonene is emulsified by NP series, microemulsion is most stable and narrowly distributed at HLB value of 12.3(either one emulsifier or mixed emulsifiers). Stability of microemulsion is increased as the amount of emulsifiers is increased at same HLB value of 12.3. In the case of using the same amount of emulsifiers, number of produced micelle are relatively large as hydrodynamic diameter is small. Therefore, the state of microemulsion is stable and the electric conductivity is increased. One can determine that higher electric conductivity value means that microemulsion has more micelles and is more stable.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.3-15
• /
• 2001

The bilayer forming ability of pseudo-ceramide PC104 in octanoic acid/water/n-octyl $\beta$-D-glucoside mixtures was investigated through the phase diagram. Because of its low solubility in water and of its crystallization, pseudoceramide PC104 was dissolved in octanoic acid, which is nontoxic additive for foods and cosmetics. The mixtures formed four different phases (L1, L2, LC and two phases). Depending on the concentration of PC104 in octanoic acid, the region of each phase was extended or contracted. On the contrary to the region of L2, regions of lamellar phase and L1 phase were expanded. The bilayer-forming ability of PC104 was explained on the basis of concentration of PC104 at interface and interaction between PC104 and octanoic acid. From FT-IR results, it was found that the interactions of PC104’s polar head group with octanoic acid increased as the amount of PC104 in octanoic acid increased. Also emulsion size and size distribution have been studied depending upon the emulsification path. droplets of emulsion prepared from lamellar phase were smaller and more homogeneous compared to those of emulsions formed from L2 phase.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.1010-1014
• /
• 2009

Monodispersed microparticles with a poly(D,L-lactide-co-glycolide) (PLGA) core and a poly(ethyl 2-cyanoacrylate) (PE2CA) shell were prepared by Shirasu porous glass (SPG) membrane emulsification to reduce the initial burst release of doxorubicin (DOX). Solution mixtures with different weight ratios of PLGA polymer and E2CA monomer were permeated under pressure through an SPG membrane with $1.9\;{\mu}m$ pore size into a continuous water phase with sodium lauryl sulfate as a surfactant. Core-shell structured microparticles were formed by the mechanism of anionic interfacial polymerization of E2CA and precipitation of both polymers. The average diameter of the resulting microparticles with various PLGA:E2CA ratios ranged from 1.42 to $2.73\;{\mu}m$. The morphology and core-shell structure of the microparticles were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The DOX release profiles revealed that the microparticles with an equivalent PLGA:E2CA weight ratio of 1:1 exhibited the optimal condition to reduce the initial burst of DOX. The initial release rate of DOX was dependent on the PLGA:E2CA ratio, and was minimized at a 1:1 ratio.