• Journal of Sasang Constitutional Medicine
• /
• v.32 no.3
• /
• pp.33-45
• /
• 2020

Object Although Taeeum and Soyang constitutional types have bigger body shapes and higher body mass index values than those with the Soeum, the relationship between the Sasang constitutional type and bone mass density is controversial and the association of osteopenia and osteoporosis remains unknown. Therefore, we investigated the relationship between bone mineral density, osteopenia, and osteoporosis according to Sasang constitutional type. Methods A total of 2,508 participants were included in this study. Among the study participants, 1,396 had Taeeum type, 276 had Soeum type, and 836 had Soyang type, respectively. The relationships to bone mass density, osteopenia, and osteoporosis in those with Sasang constitutional type were estimated using logistic and linear regression models. Results Bone mass density was significantly higher in the order of Taeeum, Soyang, and Soeum group (p < 0.01). Soeum group in comparison with Taeeum or Soyang group was significantly associated with a high odds ratio for osteopenia and osteoporosis except in the hip and femoral neck in the comparison of Taeeum and Soeum group (p < 0.01). Moreover, the bone mass density of Soeum group decreased more rapidly as the age increased when compared with Taeeum and Soyang group. Conclusions Our findings may contribute to the early prevention and management of high-risk individuals with poor bone mass density, osteopenia, and osteoporosis using Sasang constitution medicine.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.12 no.2
• /
• pp.77-84
• /
• 2014

Purpose: Carbamate insecticides are potent cholinesterase inhibitors capable of causing severe cholinergic toxicity. Use of carbamate rather than organophosphate insecticides has been increasing. Compared with organophosphate poisoning, relatively few studies have investigated carbamate-associated acute pancreatitis. We investigated general characteristics and pancreatitis of carbamate poisoning and the predictors, among those readily assessed in the emergency department. Methods: We performed a retrospective review of consecutive patients, aged over 18 years, who were admitted between January 2008 and April 2012 to an emergency department (ED) of an academic tertiary care center for treatment of carbamate poisoning. Patients who exhibited poisoning by any other material, except alcohol, were excluded. After application of exclusion criteria, patients were divided according to carbamate-induced pancreatitis and non-pancreatitis groups. Results: A total of 41 patients were included in this study. Among these 41 patients, the prevalence of acute pancreatitis was 36.6% (15 patients). Initial blood chemistry tests showed a statistically higher glucose level in the pancreatitis group, compared with the non-pancreatitis group (222, IQR 189-284 vs. 137, IQR 122-175 mg/dL, P<0.05). Regarding clinical courses and outcomes, a significantly higher proportion of patients developed pneumonia [10 (66.7%) vs. 6 (23.1%), P<0.05] and had a longer hospital stay (7 days, IQR 6-12 vs. 5 days, IQR 2-11, P<0.05), but no difference in mortality, in the pancreatitis group vs. the non-pancreatitis group. In multivariate analysis, the initial glucose was showing significant association with the presentation of carbamate-induced acute pancreatitis (odds ratio 1.018, 95% confidence interval 1.001-1.035, P<0.05). Conclusion: Carbamate-induced acute pancreatitis is common, but not fatal. Initial serum glucose level is associated with acute pancreatitis.

• Food Science and Preservation
• /
• v.12 no.4
• /
• pp.361-366
• /
• 2005

An electronic nose equipped with metal oxide sensor(MOS) was used for investigating the quality of reconstitute orange juice added different recoverable oil(cold pressed valencia oil) contents during 21 days of storage at $4^{\circ}C$. Quality changes in orange juice was described in terms of the sensitivity(${\Delta}R_{gas}/R_{air}$) of the sensors. Principal component analysis(PCA) was carried out using data obtained from twelve metal oxide sensors. The flavor of orange juice contained with the different recoverable oil contents($0.01\%{\sim}0.05\%$) was separated in PCA plot, in which the first principal component score was correlated with the content of recoverable oil. As storage periods prolonged, no significantly different sensitivity score of orange juice was observed in electronic nose. The content of recoverable oil in orange juice was reduced rapidly within 14 days, and then the decreasing ratio was slow on the next 7 days during storage at $4^{\circ}C$. The sensory score for overall and orange flavor of orange juice added $0.03\%$ recoverable oil was decreased during the 14 days and then rapidly dropped next 7 days of storage at $4^{\circ}C$.

• Journal of Adhesion and Interface
• /
• v.22 no.3
• /
• pp.98-105
• /
• 2021

In this study, we prepared a silver nanoparticle transferable adhesive composition with transparency and adhesive properties using UV-curable urethane acrylate containing silane groups. The urethane-based adhesive composition was applied between the Ag/PET film in which silver nanoparticles were patterned on PET and the PC film to be transferred. Immediately after UV-curing with UV, PET was removed to complete the manufacture of Ag/PC film. UV-curable urethane acrylate containing silane groups was synthesized using polycaprolactone diol (PCL), isophrone diisocyanate (IPDI), 2-hydroxyethyl methacrylate (HEMA), and (3-aminopropyl) triethoxysilane (APTES). The silane group of APTES can improve interfacial adhesion by reacting with the specially treated silver nanoparticle surface of the Ag/PET film. In addition, we improved the adhesion between silver nanoparticle and PC film by mixing UV-curable urethane acrylate containing a silane group and a functional acrylic diluent used as a diluent. We analyzed the synthesis process of urethane acrylate using FT-IR, and compared the adhesive properties, optical properties, and transfer properties according to the molar ratio of APTES and the acrylic diluent composition. As a result, the best transfer properties were confirmed in the adhesive composition prepared under the conditions of PUA2S1_0.5.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.2
• /
• pp.476-487
• /
• 2021

To prepare acrylic resin coatings containing 70% of solids, we used n-butyl methacrylate(BMA), methyl methacrylate(MMA), 2-hydroxyethyl methacrylate(2-HEMA), and acetoacetoxyethyl acrylate(AAEA), caprolactone acrylate(CLA) as raw materials, the glass transition temperature(T_g) of acrylic copolymer was adjusted around 50 ℃. The viscosity and molecular weight of the acrylic resins was increased with increasing OH values. Di-tert-amyl peroxide was found to be the suitable initiator to get high-solids acrylic resins. The optimum reaction conditions found in the study are 5 wt% of initiator, 4 wt% of chain transfer agent, 4 hrs of dropping time, and 140 ℃ of reaction temperature. The structure of the synthesized resins were characterized by FT-IR and ¹H-NMR spectroscopy. Number average molecular weight of 1900~2600 and molecular wight distribution of 1.4~2.1 were obtained. Crosslinked acrylic urethane clear coatings were obtained by curing reaction between the synthesized acrylic resins and hexamethylene diisocyanate trimer(Desmodur N-3300), the equivalent ratio of NCO/OH was 1.2/1.0. The physical properties from the following studies were carried out: viscosity(Zahn cup #2), adhesion, drying time, pot-life, pensil hardness, and 60° specular gloss. Various properties of the acrylic urethane clear coatings were also evaluated on the coating specimens. Adhesion property to a substrate, drying time, pot-life, pencil hardness, and 60° specular gloss of prepared paint showed quite good properties. Futhermore, prepared paint containing 10% of CLA showed quite good properties for adhesion, low viscosity and high hardness.

• Animal Bioscience
• /
• v.34 no.6
• /
• pp.1029-1037
• /
• 2021

Objective: This study was conducted to investigate effects of antifungal substance and carboxylesterase-producing inoculant on fermentation indices and rumen degradation kinetics of whole crop rice (WCR) silage ensiled at different dry matter (DM) contents. Methods: Dual-purpose inoculants, Lactobacillus brevis 5M2 and Lactobacillus buchneri 6M1, confirmed both activities of antifungal and carboxylesterase in the previous study. The WCR at mature stage was chopped, and then wilted to obtain three different DM contents consisting of 35.4%, 43.6%, and 51.5%. All WCR forages were applied distilled water (CON) or mixed inoculants with 1:1 ratio at 1×105 colony forming unit/g (INO), and ensiled into 20 L mini silo (5 kg) in quadruplicates for 108 d. Results: The INO silages had lower lactate (p<0.001) and butyrate (p = 0.022) with higher acetate (p<0.001) and propionate (p<0.001) than those of CON silages. Ammonia-N (p<0.001), lactate (tendency; p = 0.068), acetate (p = 0.030), and butyrate (p<0.001) concentrations of INO silages decreased linearly with increasing DM content of WCR forage. The INO silages presented higher lactic acid bacteria (p<0.001) with lower molds (p<0.001) than those of CON silages. Yeasts (p = 0.042) and molds (p = 0.046) of WCR silages decreased linearly with increasing DM content of WCR forage. In the rumen, INO silages had higher the total degradable fraction (p<0.001), total volatile fatty acid (tendency; p = 0.097), and acetate (p = 0.007), but lower the fractional degradation rate (p = 0.011) and propionate (p<0.001) than those of CON silage. The total degradable fraction (p<0.001), total volatile fatty acid (p = 0.001), iso-butyrate (p = 0.036), and valerate (p = 0.008) decreased linearly with increasing DM content of WCR forage, while the lag phase (p<0.001) was increased linearly. Conclusion: This study concluded that application of dual-purpose inoculants on WCR silage confirmed antifungal and carboxylesterase activities by inhibiting mold and improving rumen digestibility, while increase of wilting times decreased organic acids production and rumen digestibility.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.973-980
• /
• 2018

Study Design: Retrospective review. Purpose: To identify the trends in stimulator use, pair those trends with various grafting materials, and determine the influence of stimulators on the risk of revision surgery. Overview of Literature: A large number of studies has reported beneficial effects of electromagnetic energy in healing long bone fractures. However, there are few clinical studies regarding the use of electrical stimulators in spinal fusion. Methods: We used insurance billing codes to identify patients with lumbar disc degeneration who underwent anterior lumbar interbody fusion (ALIF). Comparisons between patients who did and did not receive electrical stimulators following surgery were performed using logistic regression analysis, chi-square test, and odds ratio (OR) analysis. Results: Approximately 19% of the patients (495/2,613) received external stimulators following ALIF surgery. There was a slight increase in stimulator use from 2008 to 2014 (multi-level $R^2=0.08$, single-level $R^2=0.05$). Patients who underwent multi-level procedures were more likely to receive stimulators than patients who underwent single-level procedures (p<0.05; OR, 3.72; 95% confidence interval, 3.02-4.57). Grafting options associated with most frequent stimulator use were bone marrow aspirates (BMA) plus autograft or allograft for single-level and allograft alone for multi-level procedures. In both cohorts, patients treated with bone morphogenetic proteins were least likely to receive electrical stimulators (p<0.05). Patients who received stimulation generally had higher reimbursements. Concurrent posterior lumbar fusion (PLF) (ALIF+PLF) increased the likelihood of receiving stimulators (p<0.05). Patients who received electrical stimulators had similar revision rates as those who did not receive stimulation (p>0.05), except those in the multilevel ALIF+PLF cohort, wherein the patients who underwent stimulation had higher rates of revision surgery. Conclusions: Concurrent PLF or multi-level procedures increased patients' likelihood of receiving stimulators, however, the presence of comorbidities did not. Patients who received BMA plus autograft or allograft were more likely to receive stimulation. Patients with and without bone stimulators had similar rates of revision surgery.

• Journal of Life Science
• /
• v.29 no.6
• /
• pp.705-711
• /
• 2019

Benign prostatic hyperplasia (BPH) is the most common urogenital disorder in men, benign tumor and is a typical disease deteriorating the quality of old men's lives, and its prevalence increases with age. Though the molecular pathogenesis of BPH has not yet been clearly revealed, it is known that the variation and aging of the endocrine including sex hormone may cause BPH. Especially the hypertrophy of the prostate cell by the formation of the excessive dihydrotestosterone (DHT) is estimated to cause BPH. If testosterone exists excessively in blood, a lot of DHT is produced in prostate by $5{\alpha}-reductase$. Thus, in this study we tried to analyze haematological change and histopathological change by using the model rat with BPH caused by hypodermic injection of testosterone to prove the effect of Houttuynia cordata extracts on BPH. Rats were divided into four experimental groups: no treatment group (N), the testosterone injection and D.W treatment group (DO), the testosterone injection and Houttuynia cordata treatment group (HO) and testosterone injection and finasteride treatment group (FO). Prostate weight, volume and weight ratio in the HO and FO groups were significantly lower than the DO group. Testosterone and DHT levels in the HO group were significantly lower than the DO group. The HO and FO groups showed trophic symptoms and were lined by flattened epithelial cells, thus, the stromal proliferation is relatively low as compared to the DO group. These results suggest that Houttuynia cordata may control benign prostatic hyperplasia.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.37-44
• /
• 2019

A bond-based peridynamic model has been reported dynamic fracture characteristic of brittle materials through a simple constitutive model. In the model, each bond is assumed to be a simple spring operating independently. As a result, this simple bond interaction modeling restricts the material behavior having a fixed Poisson's ratio of 1/4 and not being capable of expressing shear deformation. We consider a state-based peridynamics as a generalized peridynamic model. Constitutive models in the state-based peridynamics are corresponding to those in continuum theory. In state-based peridynamics, thus, the response of a material particle depends collectively on deformation of all bonds connected to other particles. So, a state-based peridynamic theory can represent the volume and shear changes of the material. In this paper, the perfect plasticity is considered to express plastic deformation of material by the state-based peridynamic constitutive model with perfect plastic flow rule. The elastic-plastic behavior of the material is verified through the stress-strain curves of the flat plate example. Furthermore, we simulate the high-speed impact on 3D granite model with a nonlocal contact modeling. It is observed that the damage patterns obtained by peridynamics are similar to experimental observations.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.507-515
• /
• 2018

The purpose of this research is to develop a slurry-type accelerator that contains various beneficial properties such as reduction of dust generation, lower alkalinity, early age strength development, etc., and uses such slurry type accelerator to produce high performance shotcrete that present excellent resistant against chloride ion penetration. In this work, shotcrete mixtures of 0.44 and 0.338 water-to-binder ratio (w/b) were produced at construction site using slurry-type accelerator. The mechanical properties and chloride ion penetration resistance of such shotcrete (including base concrete) were evaluated. According to the experimental results, the slurry-type accelerator was successfully used to produce both w/b 0.44 and 0.338 shotcretes. The 1 day and 28 day compressive strength of shotcrete were found to be closer to or higher than 10MPa and 40MPa, respectively. The w/b 0.338 shotcrete that used 40% replacement of blast furnace slag showed lower compressive strength than w/b 0.44 shotcrete without any mineral admixture at 1 day. However, the compressive strength with 40% blast furnace slag increased significantly at 28 day. Moreover, there was more than 50% increase in chloride ion penetration resistance with blast furnace slag, showing its strong potential for higher performance shotcrete application.