• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.383-383
• /
• 2000

In this paper, a motion adaptation control is applied for animation of 3-D human character. The method includes parameterization of joint motion data, motion adaptation based on body ratio of character, dynamic adaptation using genetic algorithm, etc. The feasibility of motion adaptation technique is verified by applying to motion control and adaptation of a 3-D human character.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권2호
• /
• pp.185-191
• /
• 1998

A total of 240 weaned pigs (BW 5.4 kg) were allotted in a completely randomized block design to find out the optimum lactose : sucrose ratio for the weaned pigs. Treatments were 100:0 (A), 75:25 (B), 50:50 (C), 25:75 (D) and 0:100 (E) in lactose : sucrose ratio. For the first week after weaning, average daily gain (ADG) and feed/gain (F/G) were improved (p < 0.05) for pigs fed A, B and C diets compared to pigs fed diets D and E, but the average daily feed intakes (ADFI) of the pigs were not different. From d 7 to 14, no significant differences was found in ADG and ADFI among the treatments, but pigs fed the diets A, B and C had improved F/G compared with the pigs fed diets D and E (p < 0.05). From d 15 to 21, no significant differences were found in ADG, ADFI and F/G among the treatments. The digestibility of nutrients was not influenced by the lactose : sucrose ratio except nitrogen. Nitrogen digestibility of A diet was significantly higher than D and E diets (p < 0.05) but no significant differences were found among diets A, B and C. Dry matter and phosphorus excretions were not influenced by the treatments. The pigs fed diets A, B and C excreted significantly less nitrogen than the pigs fed diets D and E. In conclusion, the results suggest that sucrose can effectively replace up to 50% lactose in starter diets.

• 한국측량학회지
• /
• 제27권3호
• /
• pp.347-356
• /
• 2009

최근 산업계를 비롯한 다양한 분야에서 대상물에 대한 3차원 측정과 형상화에 대한 요구가 급증함에 따라 측정 및 3차원 모델링을 위한 3차원 레이저스캐닝 시스템의 활용이 급증하고 있다. 그러나 3차원 레이저 스캐닝 시스템의 역할 및 활용의 증가하고 있는데 반해 스캔에 의해 획득되는 결과에는 다양한 원인에 의한 오차가 포함됨으로 인하여 고정밀 측정이 요구되는 분야에서 활용에 부분적인 제약으로 작용하고 있다. 이에 본 연구에서는 레이저측정방식을 채용하고 있는 3차원 레이저스캐닝 시스템을 이용하여 오차발생의 가장 큰 요인으로 조사되고 있는 측정대상을 표면물질의 반사율에 따른 오차발생특성과 발생비율을 분석함으로써 3차원 스캔자료의 정확도 향상을 꾀하고자 하였다. 연구결과, 측정대상물의 표면물질에 따라 반사량이 다르게 나타남을 확인할 수 있었으며, 표면반사율과 레이저파의 반사량 사이에 비례관계가 성립되는 특성을 확인할 수 있었다.

• 한국식품과학회지
• /
• 제32권1호
• /
• pp.225-230
• /
• 2000

세 가지 시판 어육연제품에 대한 TPA 매개변수들이 여러 압착조건들에 의해 평가되었다. 지름(D)과 높이 (L)의 비율(D/L)이 1, 1.5, 2인 시료가 1.7. 3.3, 6.7 cm/min의 속도로 50%, 65%, 80% 압착되었다. TPA 매개변수인 경도, 응집력, 탄력성, 껌성. 씹힘성이 얻어졌으며 통계분석에 의해 비교 분석되었다. TPA 매개변수는 시료의 단면적으로 나눔으로써 수정되었다. 본 실험결과 TPA 매개변수들은 세 가지에 형태의 어묵 모두에서 D/L과 압착율에 의해 크게 영향을 받으므로 시료의 크기, 변형의 정도 그리고 변형속도 등의 압착 실험조건이 시료간에 크게 차이가 나면 각 시료들의 TPA 매개변수들은 서로 비교될 수 없음을 보여 주었으며, 어육연제품에 대한 TPA 최적 실험 조건들은 D/L = 1.5, 압착율 = 80%, 압착속도 = 1.7-6.7 cm/min로 나타났다.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.761-768
• /
• 1999

This paper is studied to find the optimum condition of double-inlet Sirocco fan installed in an indoor PAC for low noise operation by the Taguchi method. The goal of this study is to obtain the best combination of each control factor which results in a desired flowrate of Sirocco fan with minimum variability. In this study, the parameter design of the Taguchi method is adopted for robust design by the dynamic characteristic analysis using orthogonal arrays and S/N ratios. The flowrate measurements are conducted by using a multiple-nozzle-type fan tester according to the orthogonal array L9($3^4$). The results of this study can be summarized as follows ; (i) The optimum condition of control factor is a set of where A is an inner to outer diameter ratio($D_1/D_2$), B is a width to outer diameter ratio($L/D_2$), C is a blade attachment angle(${\theta}$) and D is a number of blade(Z), (ii) The flowrate under the optimum condition satisfies the equation $y=0.0384{\cdot}M$ where M is a signal factor, namely number of revolution. The flowrate performance improves about 7.3% more largely as compared with the current condition, which results in about 35RPM reduction of number of revolution for the target flowrate $18.5m^3/min$, and (iii) The sensitivity analysis shows that the major factors in contribution to flowrate performance are A, B, and D ; the percentage contributions of each control factor are 44.01%(Z), 26.77%($D_1/D_2$) and 20.42%($L/D_2$).

• Journal of Biosystems Engineering
• /
• 제13권2호
• /
• pp.46-50
• /
• 1988

The estimation of beam radiation intensity on a tilted surface is very important to the design of a solar energy system. In order to get the beam radiation intensity, it is required to calculate the ratio of the diffuse solar radiation to the global radiation ($k_d$). The data measured at Chung-Buk National University. Cheong-ju, (from May 16, 1985 to Nov, 10, 1987) were analysed to define the relationship between hourly clearness index ($k_t$) and diffuse ratio ($t_d$). The results are is follow: 1. The percent of clearness index($k_t$) of less than 0.3 and of more than 0.8 were 2.7% and 3.1% respectively, and between 0.5 and 0.8 was 76.5%. 2. The regression equation between $k_t$ and $k_d$ was an exponential function as: $$k_d=\[{1\hspace{120}:\hspace{10}(k_t<0.1)\\1.28{\times}0.074^{k_t}\hspace{30}:\hspace{10}(0.1{\leq}=k_t<0.9)\\0.12\hspace{98}:\hspace{10}(0.9{\leq}=k_t)$$ There was a little difference between the result. of this study based on the data of 30 months and the results of previous study (ITRA 2(1):42-47, 1986.) based on the data of 8 months. 3. The hourly exponential regression equation between $k_t$ and $k_d$ was $k_d=A{\times}8^{k_t}$ and the values of constant A and coefficient B of the: equations are as the following table; 4. The percent of $k_d$ of less than 0.4 was 72.9% and of more than 0.7 was 6.6%. 5. Total mean value of $k_t$ and $k_d$ wert 0.56 and 0.32, respectively. From 10:00 to 15:00 o'clock the total mean value of $k_t$ was smaller that the hourly man value of $k_t$ and the one or $k_d$ larger.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.375-382
• /
• 2019

본 연구에서는 개발된 프린팅 재료 및 장비를 사용하여 대상 구조물의 시공성을 파악하기 위하여 기초 성능평가 프린팅 실험을 수행하였다. 3D 프린팅 콘크리트 구조물의 시공성은 콘크리트 필라멘트 재료 특성, 시공 프로세스 및 구조물의 기하특성에 영향을 받는다. 따라서, 콘크리트 구조물의 적층하는 동안의 시공성을 파악하기 위한 실험변수로서 노즐 이동속도(=80 및 100mm/s), 토출 버킷의 스크류 분당회전속도 (RPM) 및 구조물 벽체 길이의 변장비(1.67 및 5.00)를 고려하였다. 실험변수에 따른 3D 콘크리트 구조물의 최대 적층 수 및 파괴 패턴을 토대로 시공성을 분석하였다. 본 연구에서, 80mm/s의 노즐 이동속도 및 1.67의 변장비가 3D 프린팅 시공성에 유리함을 나타낸다. 또한, 적층 시 구조물 하단부의 상대변위측정을 통해 구조물의 전도 파괴 과정을 분석하였다.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.62-69
• /
• 1986

본 연구에서는 표면균열의 전파거동에 관한 연구의 일환으로 경량화재료 로서 항공기 구조용으로 널리 사용되고 있는 7075-T651 알루미늄합금을 준비하고 제하탄성 compliance법을 이용하여 표면 및 깊이 방향의 균열진전거동의 특성을 밝히고져 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.555-558
• /
• 2010

본 논문에서는 직경 대 길이비(L/D ratio)의 값이 큰 composite 추진제를 사용하는 고체 추진기관 설계에 대하여 서술하였다. 큰 직경 대 길이비를 갖는 고체 추진기관은 침식연소와 축방향 연소 불안정성이 나타날 수 있는 요인이 크다. 특히 침식연소는 별 모양 그레인을 갖는 추진기관에서 초기 압력의 상승을 지속시키는 역할을 할 수 있다. 따라서 이를 고려한 그레인, 내탄도 및 연소관에 대한 구조적인 해석을 통해 설계를 수행하였다.

• 생물정신의학
• /
• 제17권1호
• /
• pp.37-43
• /
• 2010

Objectives : The $2^{nd}$ to $4^{th}$ digit length ratio(2D : 4D) is a sexually dimorphic trait regardless of ethnicity and shows sex differences. According to previous research, men usually have a relatively shorter $2^{nd}$ digit than $4^{th}$ digit. There is tendency that men with lower 2D : 4D are perceived as being more masculine and tend to perform better in some physical sports. Furthermore, 2D : 4D is negatively associated with trait aggression. In this study, we examine gender difference of 2D : 4D and compare 2D:4D of female Korean national team members to 2D : 4D of control subjects. Besides that, we also compare 2D : 4D of female Korean national team members according to their sports entries. Methods : The sample of this study is 396 people, 67 female Korean national team member, 216 control women and 113 control men. We measured $2^{nd}$ to $4^{th}$ digit length of their right hand. In addition, we collected demographic information of female Korean national team members using a self-report questionnaire. Results : The mean 2D : 4D of female Korean national team members is 0.96(SD=0.04), smaller than control women's 2D : 4D(0.97, SD=0.03) and significantly higher than control men's 2D : 4D(0.95, SD=0.03). We also found differences between control men and women. Non-martial arts related sports athletes have significant difference with control men in 2D : 4D. However, martial arts related sports athletes' 2D : 4D is not significantly different from other groups, including control men. Conclusion : These results are consistent with the findings of previous research that there is a significant difference between men and women in their 2D : 4D. Furthermore, 2D : 4D of martial arts related sports athletes have not shown any difference from the 2D : 4D of control men that 2D : 4D of non-martial arts related athletes have shown. This fact is important in consideration of masculine characteristics. For further research, it is necessary to examine 2D : 4D difference according to sport ability and gender differences.