• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.278-287
• /
• 2015

PURPOSE. The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS. Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study. One hundred five specimens were fabricated. For the color stability test, specimens were immersed in the coffee and green tee for 1 and 8 weeks. Color change was measured by spectrometer. Water sorption was tested after 1 and 8 weeks immersion in the water. For the test of cytotoxicity, cell viability assay was measured and cell attachment was analyzed by FE-SEM. RESULTS. All types of denture base resin showed color changes after 1 and 8 weeks immersion. However, there was no significant difference between denture base resins. All specimens showed significant color changes in the coffee than green tee. In water sorption test, thermoplastic acrylic resin showed lower values than conventional heat-polymerized acrylic resin and thermoplastic polyamide resin. Three types of denture base showed low cytotoxicity in cell viability assay. Thermoplastic acrylic resin showed the similar cell attachment but more stable attachment than conventional heat-polymerized acrylic resin. CONCLUSION. Thermoplastic acrylic resin for the non-metal clasp denture showed acceptable color stability, water sorption and cytotoxicity. To verify the long stability in the mouth, additional in vitro studies are needed.

• Journal of Korean Dental Science
• /
• 제7권2호
• /
• pp.80-86
• /
• 2014

Purpose: Current common method of cytotoxicity evaluation for elastomeric impression materials use animal based cell lines, which the clinical relevance has been often questioned. Hence, the purpose of this study was to examine the difference in results with both human based and animal based fibroblast cell line. Materials and Methods: Three types of fibroblast cells were used in this study; conventional mouse fibroblasts of L929, human gingival fibroblasts (HGF-1), and immortalized human oral fibrobalsts (hTERT-hNOF). Test on extract and test by direct contact using different commercially available elastomeric impression materials were carried out according to the international standards. Result: There was significant difference in cell viability between types of fibroblasts cell used, where HGF-1 showed highest cell viability and L929 the lowest. Conclusion: Within the limitation of this study, careful consideration must be given when selecting the cells and interpreting the results for cytotoxicity evaluation of elastomeric impression materials, where use of human based cell lines such as hTERT-hNOF would be appropriate for both ease of cytotoxicity test and clinical relevance.

• 한국재료학회지
• /
• 제13권11호
• /
• pp.761-768
• /
• 2003

The corrosion resistance and cytotoxicity behavior of Ti alloys were studied as a function of Nb contents(3wt.%Nb, 20wt.%Nb, 40wt.%Nb). Ti-Nb alloys were melted by vacuum arc furnace and then rolled to 50% reduction ratio after homogenized at 105$0^{\circ}C$ for 24hrs. The corrosion resistance of Ti-Nb alloys were investigated by potentiodynamic polarization test in the 0.9% NaCl and 5% HCI solution. Biocompatibility of Ti-Nb alloys was evaluated by cytotoxicity test. The results can be summarized as follows 1) The microstructure change from equiaxial to acicular and the increased $\beta$ phase in Ti-Nb alloys were obtained as the Nb content increased. 2) For the corrosion test in the solution of 0.9% NaCl and 5% HCI, the corrosion behavior of Ti-Nb alloys was similar to ASTM grade 2 CP Ti. 3) For the cytotoxicity test, Ti-Nb alloys showed excellent biocompatibility compared to ASTM grade 2 CP Ti, 316L STS and Co-Cr alloys.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.89-94
• /
• 2003

The use of titanium alloys as biomaterials is increasing due to their superior biocompatibility and enhanced corrosion resistance compared to conventional stainless steels and cobalt-based alloys. Ti-6Al-4V ($\alpha+\beta$type) alloy instead of pure titanium ($\alpha$type) is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. It also has similar characteristics to Ti in inducing bony ingrowth. But it has been reported recently that the vanadium element expresses cytotoxicity and carcinogenicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. In order to overcome their detrimental effects, $\beta$-phase stabilizer Nb was chosen in the present study. CP-Ti(ASTM grade 2), Ti-3wt.%Nb($\alpha$type), Ti-20wt.%Nb ($\alpha+\beta$type) and Ti-40 wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. Biocompatibility of Ti-Nb alloys was evaluated by cytotoxicity test. The results can be summarized as follows: 1. For the cytotoxicity test, Ti-Nb alloys showed excellent biocompatibility compared to CP-Ti(ASTM grade 2), 316L STS and Co-Cr alloys.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.84-95
• /
• 2001

Titanium is widely used in dentistry for its low density, high strength, fatigue resistance, corrosion resistance, and biocompatibility. But it has a tendency of surface damage under circumstance of friction and impact for its low hardness of the surface. Coating is one of methods fir increasing surface hardness. Its effect is to improve surface physical characteristics without change of titanium. Diamond-like carbon and titanium nitride are known for its high hardness of the surface. So that this study was aimed at the wear test and the cytotoxicity test of the commercially pure titanium and Ti-6Al-4V alloy which were deposited by diamond-like carbon film or titanium nitride film to acertain improvement of the surface hardness and the biocompatibility. A disk (25mm diameter, 2mm thickness) was made of commercially pure titanium and Ti-6Al-4V alloy and these substrates were deposited by diamond-like carbon film or titanium nitride film. Diamond-like carbon film was deposited by the method of radiofrequency plasma assisted chemical vapor deposition and titanium nitride film was deposited by the method of reactive arc ion plating. Then these substrates were tested about wear characteristics by the pin-on-disk type wear tester in which ruby ball was used as a wear causer under the load of 32N, The fracture cycles were measured by rotating the substrates until their films were fractured. The wear volume was measured after 150 cycles and 3,000 cycles using surface profiler. The cytotoxicity test was peformed by the method of the MTT assay. The results were as follows : 1. In the results of the wear volume test, commercially pure titanium and titanium alloy which were coated by diamond-like carbon film or titanium nitride aim had higher resistance against wear than the substrates which were not coated by any films (P<0.05). 2. In the results of the fracture cycle test and the wear volume test, diamond-like carbon film had higher resistance against wear than titanium nitride film (P<0.05). 3. In both coatings of diamond-like carbon aim and titanium nitride film, Ti-6Al-4V alloy had higher resistance against wear than commercially pure titanium (P<0.05) 4. In the results of the cytotoxicity test, diamond-like carbon film and titanium nitride film had little cytotoxicity as like commercially pure titanium or Ti-6Al-4V alloy (P>0.05).

• 대한치과보철학회지
• /
• 제37권6호
• /
• pp.717-729
• /
• 1999

Although many studies on the cytotoxicity of the dental cast base metal alloys and their components have been carried out, the results are rather conflicting because of the different type of cells used and the various experimental procedures taken. Recently a number of scientists have claimed that it would be preferable to focus on the use of cells from relevant specific location of the human bodies. Consequently, the primary cultured oral keratinocyte derived from oral mucous along with nickel chloride and several of widely used dental cast base metal alloys(two Ni-Cr alloys and one Co-Cr alloy)in domestic were selected for this study, from which 1) The amounts of released metal ions were determined using atomic absorption spectrometry, 2) The cytotoxicity of nickel chloride and dental cast base metal alloys was evaluated via MTT assay, and finally, 3) The amounts of released metal ions and the cytotoxicity of nickel chloride were correlated with the cytotoxicity of dental cast base metal alloys And, the results were summarized as follows; 1. Nickel ion from Ni-Cr alloys and Cobalt ion from Co-Cr alloys resulted in maximum releasing rate during first 2h hours, followed by a decrease in releasing rate with time. Chromium ion were found to be minimal in all alloys. 2. In cytotoxic test. with $40{\mu}M,\;80{\mu}M$ of nickel chloride, there were observed an increase in the relative cell number compared to control samples after 24 hours. With $160{\mu}M$, there was found to be no difference in the relative cell number with control, except that 48 hour showed a increase in relative cell number. With $320{\mu}M$, the relative cell number remained constant and decreased after 48 hours, and with $640{\mu}M$, a continuing decrease in relative cell number was observed throughout test period. 3 The sensitivity of primary cultured oral epithelium to nickel was lower compared to the cells used in other studies. 4. CB-80 Soft and Regalloy showed no cytotoxicity to primary cultured oral epithelium and New crown resulted in a slight cytotoxicity. In conclusion, it was shown that the primary cultured oral keratinocytes could be applied successfully as testing cells in cytotoxicity test. Futhermore, the dental cast base metal alloys used in this study were found to be biocompatible.

• 한국식품조리과학회지
• /
• 제28권5호
• /
• pp.569-577
• /
• 2012

The physicochemical characteristics and biological activities, including antioxidant activity, antimutagenicity, and cytotoxicity of hot-water extract of fruiting body of Hericium erinaceus, were investigated in this study. Hot-water extract of fruiting body of Hericium erinaceus contained carbohydrate (7.86%), protein (10.91%), and ${\beta}$-glucan (3.62%). Water solubility of hot-water extract was 42.58%. Antioxidant activities of the extract were evaluated by ABTS assay and FRAP assay. The $IC_{50}$ value was 312.21 ${\mu}g/mL$ in ABTS assay. Antimutagenic activity of the extract was evaluated by Ames test. Antimutagenicity of hot-water extract (5 mg/mL) on Salmonella Typhimurium TA100 mutagenated by sodium azide (0.15 ${\mu}g/mg$) was 69.2%. Cytotoxicity of hot-water extract was also evaluated by MTT and SRB assay. The cytotoxicity was highest (83.95%) on Hep3B treated with 2,000 ${\mu}g/mL$ of hot-water extract in SRB assay. Therefore, it is suggested that hot-water extract of fruiting body of Hericium erinaceus has high antioxidant activity, antimutagenicity, and cytotoxicity.

• 약학회지
• /
• 제45권3호
• /
• pp.310-319
• /
• 2001

To compare skin irritation and cytotoxicity of anti-wrinkle agents, we examined skin irritation of six anti-wrinkle agents (ascorbic acid, glycolic acid, all trans-retinoic acid, ginseng extract, retinol, EB) in New Zealand white rabbit. Cytotoxicity of these agents was determined by MTT [tetrazolium salt 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] at multi-time points in cultured HaCaT cell, a human immortalized keratinocyte cell. We then analyzed correlation between skin irritation and cytotoxicity by spearman's rank correlation analysis. All trans-retinoic acid showed the highest primary irritation index (0.92) in skin irritation test. Being all the six agents not irritant, retinal showed the most cytotoxic agents. The correlation between skin irritation and cytotoxicity ($IC_{50}$/ at different time point was 0.814, 0.757, 0.814 and 0.7 at 3, 24, 48 and 72 h, respectively. We also fecund that IC$_{20}$ and IC$_{80}$ of these agents showed similar correlation with skin irritation. These results therefore demonstrated that there is close correlation between skin irritation and cytotoxicity $IC_{50}$/ value by MTT in HaCaT cell at early time points by anti-wrinkle agents or IC$_{20}$ value. $IC_{50}$/ at earily time point or IC$_{20}$ values may be reliable alternative determinant of skin irritation.n.

• Restorative Dentistry and Endodontics
• /
• 제45권4호
• /
• pp.47.1-47.11
• /
• 2020

Objectives: The aim of this study was to assess the physicochemical properties, cytotoxicity and penetration into dentinal tubules of ChlorCid^TM Surf (3% sodium hypochlorite [NaOCl] with surfactant) in comparison to ChlorCid^TM (3% NaOCl without surfactant). Materials and Methods: The physicochemical properties evaluated were pH, surface tension, free available chlorine (FAC) and contact angle. Cytotoxicity was evaluated in L929 fibroblasts exposed to the solutions by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and neutral red assays. Assessment of penetration into dentinal tubules was performed by staining single-rooted permanent human teeth with crystal violet (n = 9), which were irrigated with the solutions and analyzed in cervical, middle and apical segments. Data were analyzed by one-way analysis of variance (ANOVA) and Tukey's post-test, 2-way ANOVA and Bonferroni's post-test or t-test (α = 0.05). Results: ChlorCid^TM Surf and ChlorCid^TM FAC values were close to those indicated by the manufacturer. ChlorCid^TM Surf showed lower surface tension and contact angle on dentin, and higher pH than ChlorCid^TM (p < 0.05). The penetration of ChlorCid^TM Surf was higher in cervical and middle segments, compared with ChlorCid^TM (p < 0.05). There was no difference in irrigant cytotoxicity (p > 0.05). Conclusions: ChlorCid^TM Surf showed lower surface tension, lower contact angle on root canal dentin, higher penetration into dentinal tubules and more alkaline pH, compared with ChlorCid^TM. However, both solutions showed similar cytotoxicity and FAC content.

• 대한한의학회지
• /
• 제19권2호
• /
• pp.313-325
• /
• 1998

The effect of Holotrichia on natural killer cell activity in normal mouse were studied. 1. The oral administration of Holotrichia increased spleen weight about 21.1% and also cell numbers of spleen compared to control mice group. 2. The cytotoxicity of effector cell was most effectively induced in a ratio of 50 : 1(effector/target cell). 3. Cytotoxicity of effector cells was. increased about 24% as compared with control group in in vivo test. 4. On the other hand, the administration of Holotrichia original solution showed significant increase the cytotoxicity. The cytotoxicity was increased concentration dependently. 5. The cytotoxicity by $^{3}H-thymidine$ incorporation assay showed similar effect with LDH enzyme method. 6. In the purified NK cells, the cytotoxicity was increased about 31% as compared with control group in in vivo system and the ratio of cytotoxicity was generally more increased than that of partially purified NK cell. 7. In vitro experimet of the purified NK cells, the cytotoxicity was increased 11.8% as compared with control group and the ratio of cytotoxicity was also more increased than that of partially purified NK cell. These results suggest that Holotrichia is administrated to mice with malignant tumors, the increase of NK cell activity may occur and affect tumor cells.