• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2509-2517
• /
• 1993

Lapping is a very complicated and random process resulting from the variation of abrasive grains in its sizes and shapes and from the numerous factors having an effect on the process quality. Thus it needs to be analyzed by experimental method rather than by theoretical method to obtain the relative effects of factors quantitatively. In this study, cylindrical lapping experiment designed by Taguchi's L8 orthogonal array was performed and analyzed by Yates' ANOVA table. As a result, effective factors and interaction effects were identified and discussed. Also the optimal factor combination to obtain the largest improvement of surface roughness was selected and confirmatory experiments were peformed.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.1-7
• /
• 2015

In the present study, copper micromolds with a microhole array were precisely manufactured by a synchrotron LIGA process. Like in the traditional LIGA process, a deep X-ray lithography based on a synchrotron radiation was employed as the first manufacturing step. Due to the excellent optical performance of the synchrotron X-ray used, cylindrical micropillar arrays with high aspect ratio could be efficiently obtained. The fabricated microfeatures were then used as a master of the subsequent copper electroforming process, thereby resulting in copper micromolds with a microhole array. Thermoplastic hot embossing experiments with the copper micromolds were carried out for imprinting cylindrical microfeatures onto a polystyrene sheet. Through the hot embossing, the effect of embossing temperature and usefulness of the present manufacturing method could be verified.

• International Journal of Computer Science & Network Security
• /
• 제21권2호
• /
• pp.40-43
• /
• 2021

In the article of instability on the peak power level, duration and repetition period of a multifrequency space-time signal, we calculated the maximum values of the errors of the parameters of the laws of spatial-phase-frequency control. Requirements for the accuracy of the location of the phase centers of the emitters in a cylindrical phased array antenna with pyramidal horns; it is advisable to calculate the radiation field using single-stage and multi-stage distribution laws. The phase centers of individual radiation sources of a cylindrical phased array antenna have been studied; they have almost no effect on the duration and period of recurrence.

• 지구물리
• /
• 제1권1호
• /
• pp.51-58
• /
• 1998

단극배열을 사용하는 시추공-시추공 전기비저항 탐사법의 문제점을 파악하기 위하여 원통형 2차원 이상체에 대한 이론해로부터 겉보기 비저항 및 2차전위 분포양상을 계산하고 이를 분석하였다. 분석결과 시추공-시추공 전기비저항 탐사에서 2차원 이상체가 전도체일 경우는 물론이고 부도체일 경우에도 모두 모암의 비저항보다 낮은 겉보기 비저항을 나타낸다. 따라서 단극배열을 사용하여 획득한 시추공-시추공 전기비저항 탐사자료만으로 시추공 사이에 존재하는 이상체의 전도도에 관한 해석이 거의 불가능하다. 이러한 문제점의 해결을 위해서는 3차원 자료획득 및 해석이 필요하며, 이의 실현이 불가능할 경우에는 적어도 동일 시추공 자료를 이용해야만 이상체의 전도도에 관한 해석이 가능해 진다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.19-21
• /
• 1997

This paper treated a new method that generates the dipole magnetic field for high speed machines by using Halbach array, which was suggested by Klaus Halbach. The Halbach array can produce the various field distribution without magnetic materials. Therefore, the iron losses can be reduced. This paper presented the magnetic characteristics on both linear and cylindrical Halbach array. And the Halbach array for dipole field was manufactured with Nd-Fe-B magnets having 1.17(T), the measured flux density was compared the theoretical values acquired by three dimensional FEM analysis. Finally, the magnetic characteristics of Halbach array were compared with those of other conventional dipole field systems.

• 소음진동
• /
• 제7권2호
• /
• pp.255-260
• /
• 1997

This paper describes 3-dimensional volume array of 4 microphones including a reference microphone which is capable of imaging wideband noise source position in 2-dimensional image plane. The cross correlation function and corresponding imaging function between a reference microphone and other microphone, are derived as a function of noise source position. The magnitude of the imaging function gives noise source mapping in image plane. Since the image plane is selective from a rectangular and a cylindrical plane, noise source position information such as range and bearing relative to the array is identified very much easily. Simulation results for typical source configurations confirms the applicability of the proposed array in noise control field.

• 한국콘텐츠학회논문지
• /
• 제18권6호
• /
• pp.461-466
• /
• 2018

본 연구는 자기공명영상에서 array coil을 이용한 부분영역의 영상화 시 SNR을 증가시킬 수 있는 방안으로 element를 선택하여 신호를 수집하는 기법의 유용성에 대해 알아보고자 하였다. 연구방법은 array coil에 두 개의 원통형 fluid phantom을 나란히 위치시킨 다음, 부분영역인 한 개의 fluid phantom 영상화 시 element 전체를 사용하여 신호를 수집하는 경우와 선택한 경우로 나누어 SNR을 비교하였다. 연구결과, T1, T2 강조영상 모두 element를 선택하여 신호를 수집하는 경우가 전체를 사용한 경우보다 T1강조영상은 5.49%, T2강조영상은 14.64% 유의하게 증가하였다. 결론적으로 array coil을 이용한 부분영역의 영상화 시 element를 선택하여 신호를 수집하면 손쉽게 SNR을 증가시킬 수 있으리라 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.693-699
• /
• 2011

The outermost SG tubes have more structural problems than inside tubes. Many studies have used a uniform added mass coefficient for all of the SG tubes during the FIV analysis. The purpose of this study is to find out the added mass coefficients for each tube in a cylindrical shell. When a number of tubes are increased, added mass coefficients are also increased. And added mass coefficients at outermost tubes are less than those of inside tubes. According to gap changes between outermost tube and cylindrical shell, added mass coefficients are decreased with increasing the gap. When the gap has very large value, it shows that the added mass coefficient is asymptotically converged to the value of the tube array in a free fluid field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.160-161
• /
• 2010

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 창립 20주년기념 특별학술발표회
• /
• pp.318-319
• /
• 2009