• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.175-182
• /
• 2009

This paper summarizes a solution procedure for a large cylindrical structure mounted underneath a ship as a sonar. Vibration analysis of the water loaded structure is required to enhance the structural reliability as well as acoustic performance of the sonar. It is, however, often very difficult to solve such structures since they have many DOFs, considering the frequency of interest and the water-loading. The mode mapping method is proposed and verified to take into account the water-loading with the minimum DOF for the analysis. The cyclic symmetric method is then reviewed to show how the eigen properties of the full model can be obtained from the representative segment model. The solution procedure is finally proposed and applied successfully for a simplified water-loaded cylindrical array structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1061-1063
• /
• 2004

This paper deals with the application of cylindrical Halbach array to a PM motor capable of producing pure rotary motion, pure linear motion, or helical motion, The proposed motor consists of an exterior polar Halbach array for a rotary motion and interior cylindrical Halbach array for a linear one. The two- dimensional space harmonic method is employed for predicting the electromagnetic characteristics, with reference to the following parameters as variables: magnetic field, torque/thrust and back emf.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.81-87
• /
• 2012

This paper establishes a modeling and simulation procedure for structural response and reliability of a cylindrical array sensor on submarines under the shock generated by underwater explosion. The structural reliability of SONAR is important because the submarine could get out of combat ability by the structural damage of the SONAR upon explosion. A cylindrical array sensor was first modeled using the finite element method. Modal analysis was then performed for the check of the reliability of the modeling. The shock resistance simulations were performed for the responses to the structural shock waves and for the responses to the directly applied underwater shock waves, according to BV-043 and MIL-STD-901D, respectively. The stresses of the structure were evaluated with von-Mises scheme. Vulnerable regions were exposed through mapping the maximum stress to the structural model. Maximum stress of the SONAR was compared with the yield stress of the material to examine the structural reliability.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.203-209
• /
• 2016

According to the wear detection history for the steam generator tubes in the nuclear power plant, the outer tubes inside the steam generator have more problems on the flow-induced vibration than inner tubes. Many researchers and engineers have used a specified added mass coefficient for a given tube array during the design stage of the steam generator even though the coefficient is not constant for entire tube in cylindrical shell. The aim of this study is to find out the distribution of added mass coefficients for each tube along the radial location. When numbers of tubes inside a cylindrical shell are increased, values of added mass coefficients are also increased. Added mass coefficients at outer tubes are less than those of inner tubes and they are decreased with increasing the gap between the outermost tube and the cylindrical shell. It also turns out when the gap between the outermost tube and the cylindrical shell approaches infinite value, the added mass coefficient converges to an asymptotic value of given tube array in a free fluid field.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.922-927
• /
• 2009

The transducers used in active sonar on surface ships are packed in a specific geometry in the array drum in order to meet the requirements such as the source level, directional beam pattern, etc. This paper describes the acoustic characteristics of the cylindrical array which is based on a 64 vertical staves arrangement, each stave composed 5 independent transducers. Firstly, the single transducer on the rigid baffle in the water is analyzed with the Finite Element Method. From the result of the FE analysis nodal velocities on the radiation surface is calculated and used with the boundary conditions of the transducers mounted on the array drum. Then the acoustic pressure is calculated in the field points using the Boundary Element Method and the other acoustic informations, the source level, beam pattern, near field and far-field distance, were acquired.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1279-1290
• /
• 2007

본 논문에서는 복합 빔 패턴들을 형성하기 위해 오프셋 선형 급전 배열에 의해 공간 급전되는 원통형 하이브리드 안테나에 대하여 기술한다. 선형 급전 배열은 12개의 마이크로스트립 패치 소자들로 구성되며, 수평면에서 $90^{\circ}$의 구형 빔 패턴을 형성한다. 그리고, 수직면에서 $-5^{\circ}{\sim}-25^{\circ}$ 범위에 걸쳐 코씨컨트 빔 패턴을 형성하기 위해 선형 급전 배열에 의해 원통형 반사판상의 수직 곡선이 성형화 된다. IMT-2000 서비스 대역에서 동작하는 $140{\times}50\;cm$ 크기의 원통형 반사판 개구면을 갖는 하이브리드 안테나 시제품을 설계 및 제작하였으며, 또한 안테나의 전기적 성능들을 측정하고 그 결과들을 분석하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1054-1059
• /
• 2007

This paper summarized a solution procedure for a large cylindrical structure mounted underneath a ship as a sonar. Vibration analysis of the water loaded structure is required to enhance the structural reliability as well as acoustic performance of the sonar. It is, however, often very difficult to solve such structures since they have many DOFs, considering the frequency of interest and the waterloading. The cyclic symmetric method is firstly reviewed to show how the eigen properties of the full model can be obtained from the representative segment model. The mode mapping method is then proposed and verified to take into account the waterloading with the minimum DOF for the analysis. The solution procedure is finally proposed and applied for a waterloaded cylindrical array structure.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권11호
• /
• pp.533-539
• /
• 2005

In the previous work, we performed the analysis of a tubular type moving-magnet linear oscillatory actuator (LOA) with cylindrical Halbach array by using 2-d analytical formulas and confirmed validity of analytical results by comparison of those with both finite element (FE) computation and experimental results. This paper deals with the dynamic characteristic analysis of the moving-magnet LOA with cylindrical Halbach array. Control parameters such as the thrust constant, the back-emf constant, resistance and inductance are obtained from both analytical and experimental results. And then, the dynamic simulation algorithm is established by the state and output equation obtained from voltage and motion equation. Finally, for various values of frequency, the dynamic simulation and experimental results for the characteristics of the voltage, current and displacement of moving-magnet LOA are presented. The simulation results are validated extensively by experiments. The experimental and simulation results for the variation of stroke according to control voltage are also presented for various values of frequency.

• 한국음향학회지
• /
• 제29권1호
• /
• pp.1-9
• /
• 2010

공간 콘볼루션을 이용하여 원통형 구조에서 진동체 사이의 상호 방사 임피던스를 계산하였다. 본 계산 방식은 평면 배열을 공간 콘볼루션에 의해 원통 구조로 변환하고 이에 대한 상호 방사 임피던스를 계산하는 것으로서 정확한 형태의 원통형 배플을 고려하지는 못하지만 계산 시간을 단축할 수 있는 효과가 있다. 본 논문에서 제안하는 공간 콘볼루션 방식에 의한 계산 결과를 기존의 4중 적분 방식에 의한 계산 결과와 비교하여 계산 방식에 대한 오차를 분석하였고, 또한 배열 구조에서 발생하는 오차를 분석하기 위해 평면 배열에서의 결과와 비교하였다. 앞의 두 가지 형태의 비교를 통하여 본 계산 방식에 대한 오차를 확인하였고, 아울러 오차 범위 내에 있는 구간에서는 공간 콘볼루션에 의한 원통 구조라 할 지라도 제한적으로 사용할 수 있음을 확인하였다.

• 한국항행학회논문지
• /
• 제10권4호
• /
• pp.326-332
• /
• 2006

본 논문에서는 수직편파 수평면내 무지향성을 갖는 마이크로스트립 안테나를 연구하기 위하여 마이크로스트립 패치의 안테나 소자 4개를 원통형 표면상에 수평으로 배열하였다. 안테나의 중심주파수는 ISM 대역인 2.45GHz를 선택하였다. 이는 무선 LAN의 접속점, 무선 마이크의 기지국 등에서 적용이 가능하기 때문이다. 먼저 기본 계산식에서 기본 패치의 폭과 길이를 계산하고 2.5D와 3D 컴퓨터 시뮬레이션으로 최적화하였다. 제작된 안테나의 특성을 측정한 결과 동축케이블 포트의 임피던스는 51.915+j3.688 ${\Omega}$이며, 반사손실은 -31dB, 전압정재파비는 1.081로 나타났다.