• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.55-61
• /
• 2000

In this paper we have discussed on the characteristics and modeling of machined geometry which was established for the case of round shape machining also the effects of externally machined profile are analyzed and its modeling realia-bility was verified by the experiments of roundness testing especially in lathe operation. In this study we established a harmonic geometric model with the parameter harmonic function. In general we can calculate the theoretical roundness profile with an arbitrary multilobe parameter. But in real experiments only 2-5 lobe profile was frequently measured, The most frequently measured ones are 3 and 5 lobe profile in experiments. With these results we can predict that these results may be applied to round shape machining such as turning drilling boring ball screw and cylindrical grinding operation in bearing and shaft making operation with the same method. in this study simulation and experimental work were performed to show the profile behaviors. we can apply these new modeling methods in real process for the predic-tion of part profile behaviors machined such as in round shape machining operation.

• Structural Engineering and Mechanics
• /
• 제35권6호
• /
• pp.759-772
• /
• 2010

Seismic isolation is a well-known method to mitigate the earthquake effects on structures by increasing their fundamental natural periods at the expense of larger displacements in the structural system. In this paper, the seismic response of isolated and fixed base vertical, cylindrical, liquid storage tanks is investigated using a Finite Element Model (FEM), taking into account fluid-structure interaction effects. Three vertical, cylindrical tanks with different ratios of height to radius (H/R = 2.6, 1.0 and 0.3) are numerically analyzed and the results of response-history analysis, including base shear, overturning moment and free surface displacement are reported for isolated and non-isolated tanks. Isolated tanks equipped by lead rubber bearings isolators and the bearing are modeled by using a non-linear spring in FEM model. It is observed that the seismic isolation of liquid storage tanks is quite effective and the response of isolated tanks is significantly influenced by the system parameters such as their fundamental frequencies and the aspect ratio of the tanks. However, the base isolation does not significantly affect the surface wave height and even it can causes adverse effects on the free surface sloshing motion.

• 소음진동
• /
• 제6권1호
• /
• pp.107-114
• /
• 1996

윤활유와 베어링 볼을 내장한 원통형 구조물이 외부로부터의 굽힘 하중을 받을 때의 진동감쇠 특성을 조사하였다. 심험대상인 원통형 구조물의 내부에는 윤활유의 점성력과 베어링 볼의 관성력에 의한 저항력이 발생하며 이 저항력에 의하여 원통형 구조물의 진동이 감쇠된다. 윤활유와 베어링 볼의 감쇠력이 최대가 되는 최적 혼합체를 찾기 위하여 점도가 다른 윤활유와 재질 및 직경이 다른 베어링 불을 알루미늄관에 넣고 감쇠력을 측정하였다. 실험 결과를 무차원 변수를 사용하여 분석하였으며 수평 원통과 수직 원통의 감쇠율을 비교하였다. 수령 원통의 경우에 감쇠율의 변화가 거의 없었으나 수직원통의 경우 원통 길이에 대한 베어링 볼 직경 의 비율이 약 0.28 이상부터 감쇠율이 증가하기 시작하였다. 볼의 직경과 원통 직경 비에 대한 감쇠율의 변화와 세장비 및 중력 효과에 대한 감쇠율의 영향도 조사하였다.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.77-85
• /
• 2014

This study set out to predict the load capacity and rotordynamic coefficients of tilting-pad journal bearings, taking the pivot stiffness into account. The analysis uses rocker-back (cylindrical) and ball in socket (spherical) pivot models, both of which are based on Hertzian contact stress theory. The models ascertain the non-linear elastic deformation of the pivots according to the applied load, pivot geometry, and material properties. At present, the Reynolds equation for an isothermal, isoviscous, and incompressible fluid is used to calculate the film pressure by using the finite-element method, after which the Newton-Raphson method is used to simultaneously find the journal center location, pad angles, and pivot deflections. The bearing analysis, excluding the pivot models, is validated using predictions those are readily available in the literature. As the rotor speed increases, the predicted journal eccentricity and damping coefficients decrease, but the stiffness coefficients increase, as expected. Most importantly, the implementation of the pivot models increases the journal eccentricity but significantly decreases the stiffness and damping coefficients of the tilting-pad journal bearings.

• 한국지반신소재학회논문집
• /
• 제9권2호
• /
• pp.33-40
• /
• 2010

본 연구에서는 강재스트립 보강재에 지지부재가 결속된 형태의 보강재에 대하여 인발시험을 수행하였으며, 인발시험결과와 기존에 제안된 지지저항 평가식에 의한 결과를 비교함으로서 인발변위 50mm일 때의 인발력과 최대 인발력에 의한 지지부재의 지지저항 특성을 평가하였다. 인발변위 50mm일 때의 인발력 적용에 의한 지지저항응력(${\sigma}^{\prime}_b$)은 수직응력 증가에 따라 전면전단파괴에서 펀칭전단파괴로 근접하였으며, 지지부재 개수의 증가에 따라서는 펀칭전단파괴에서 전면전단파괴로 근접하는 것으로 확인되었다. 최대 인발력을 적용한 지지저항응력(${\sigma}^{\prime}_b$) 은 수직응력 조건 및 지지부재 개수와 관계없이 전면전단파괴에 근접하였지만, 보강토옹벽의 허용변위를 고려한다면 설계 적용에는 무리가 있을 것으로 분석되었다. 그리고 Prandtl의 소성이론 및 원주공동확장이론에 의한 이론식을 이용한 지지저항 평가는 인발시험결과가 Prandtl의 소성이론을 이용한 예측결과에 보다 가까운 것으로 확인되었다. 또한 Prandtl의 소성이론 및 원주공동확장이론을 이용한 지지저항 평가모델은 전면전단파괴와 펀칭전단파괴모델 사이에 위치하는 것을 확인하였다.

• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.263-271
• /
• 2010

The rollers of cylindrical roller bearing are axially profiled to relieve high edge stress concentration caused by mainly their finite length and by misalignment. In this paper, a numerical analysis is carried to study the EHL of misaligned (tilted) rollers with axially profiled ends. Using a finite difference method with non-uniform grids and the Newton-Raphson method, the highly nonlinear EHL problems are systematically solved. Physically consistent solutions are obtained for moderate load, material parameters and very small misalignment. For different misalignment angles, contours and sectional plots of pressure and film shape near both edge regions are compared. The asymmetric pressure distributions and film shapes show that the EHL results of finite line contacts are highly dependent upon very small amounts of roller misalignment. Especially, the effect of misalignment on the EHL pressure distribution is much higher than the film shapes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1244-1249
• /
• 2008

This paper shows a perfonnance analysis for pneumatic servo cylinder. The pistons without seal have partly cylindrical and conical shapes. 2 dimensional Reynolds equation and FD(finite differential) numerical techniques are utilized for the perfonnance analysis. The relationship among self-centering forces and leakage flows are investigated. Also, optimal design values for a servo cylinder are presented. A prototype of servo cylinder which had rod bearing with four pockets, five pockets, and six pockets was manufactured respectively.

• 소음진동
• /
• 제7권2호
• /
• pp.255-260
• /
• 1997

This paper describes 3-dimensional volume array of 4 microphones including a reference microphone which is capable of imaging wideband noise source position in 2-dimensional image plane. The cross correlation function and corresponding imaging function between a reference microphone and other microphone, are derived as a function of noise source position. The magnitude of the imaging function gives noise source mapping in image plane. Since the image plane is selective from a rectangular and a cylindrical plane, noise source position information such as range and bearing relative to the array is identified very much easily. Simulation results for typical source configurations confirms the applicability of the proposed array in noise control field.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.626-633
• /
• 2009

A large scale resonant column testing equipment is under development. The would-be equipment is aiming to test 150mm-diameter specimens, which can contain as large a grain size as 25mm. Such a large specimen is hardly excitated with the existing fixed-free end condition because the torsional force cannot be effectively coupled to the specimen. The specimen will be rather resonated with free-free condition and the scheme is implemented with a rotational bearing installed between coil-magnet exciter and base pedestal. Presently the equipment was assembled and is under calibration with a cylindrical brass specimen.

• Mycobiology
• /
• 제42권4호
• /
• pp.317-321
• /
• 2014

Fruiting bodies similar to those of the ascomycete fungi Podostroma cornu-damae and Cordyceps militaris were collected from Mt. Seunghak in Busan, Korea on August 21, 2012. The fruiting bodies were cylindrical, with tapered ends and golden red in color. The fruiting bodies contained abundant conidiophores bearing single-celled conidia, but no perithecia or asci. Pure culture of the fungal isolates was obtained through single-spore isolation. Analyses of morphological characteristics, including conidia shape, and phylogenetic traits, using internal transcribed spacer sequences, showed that these isolates belonged to the species Simplicillium lanosoniveum. Although this fungal species is known to be mycoparasitic, the isolates obtained in this study were unable to infect fungi. However, silkworms (Bombyx mori) inoculated with the fungal isolates died during the larval or pupal stages, as has been shown for the strongly entomopathogenic fungus Beauveria bassiana. This study is the first report of the entomopathogenicity of S. lanosoniveum and indicates its potential for use in biological control of insects.