• 대한토목학회논문집
• /
• 제31권4A호
• /
• pp.331-340
• /
• 2011

콘크리트 공시체의 압축강도와 연성성능을 향상시키기 위하여 섬유-강판 복합플레이트 fiber-sheet and steel-plate composite plate(FSP))의 적용을 실험적으로 연구하였다. FSP 보강재료, 앵커볼트 설치방법, 콘크리트 압축강도 등이 고려된 FSP 보강 콘크리트 공시체의 압축실험을 실시하였다. FSP 보강 콘크리트 공시체의 압축실험결과, FSP는 콘크리트 공시체의 압축강도와 변형저항성능을 크게 향상시켰다. FSP 보강 콘크리트 공시체의 압축성능은 FSP 보강재 종류, 앵커볼트 사용방법, 콘크리트 압축강도에 영향을 받는 것으로 나타났다. 앵커볼트를 사용한 FSP 보강 콘크리트 공시체 실험에서 측정된 FSP의 파단변형률은 FRP 보강 콘크리트 압축부재 실험에서 측정된 FRP 파단변형률보다 크게 측정되었다. FSP 파단변형률의 크기는 FSP의 보강효과에 영향을 미친다. FSP 보강 콘크리트 공시체 압축실험에서 측정된 축방향변형률, 원주방향변형률, 체적 변형률에 의한 FSP 내부 콘크리트의 손상상태를 분석하여 FSP 보강효과를 평가하였다. 연구결과, FSP 보강공법은 콘크리트 압축부재의 보강방법으로 실용적 기법이라 판단된다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.75-81
• /
• 2008

A robust controller is proposed for regulating effectively the pressure of control cylinder of swash plate type variable displacement axial piston pump. In order to design a precise and robust pressure control system, a mathematical model for swash plate control system is identified by the signal compression method. Based on the identified mathematical model, an $H_{\infty}$ robust swash plate controller is designed which is robust to the variation of the load pressure. The precise and robust swash plate control characteristics are verified by experiments.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.35-47
• /
• 2003

내부를 콘크리트로 속채움한 강관합성말뚝에 대한 기존의 하중전이 측정에서는 강관의 변형률만 측정하고 콘크리트의 변형률은 강관과 동일하다고 가정하였으며, 시방서에 규정한 방법으로 구한 강관과 콘크리트의 탄성계수를 이용하여 말뚝구성부재의 응력 및 축하중을 산정하였다. 그러나 강관의 변형률만 측정하여 강관과 콘크리트가 완전합성 거동하는 것으로 산정한 축하중은 실제 하중값과 상당한 차이를 보이고 있어 강관합성말뚝의 거동을 정확히 분석할 수 없었다. 따라서, 강관합성말뚝의 경우 각 구성부재의 변형률을 측정할 필요성이 제기되었다. 본 연구에서는 강관합성말뚝의 구성부재인 강재와 콘크리트의 변형률을 측정하는데 사용할 수 있도록 개발된 변형봉 센서에 대한 검증실험을 수행하였다 변형봉 센서를 사용하여 말뚝축하중을 산정할 경우 콘크리트의 탄성계수는 현장에서 제작한 콘크리트 공시체의 압축강도 시험에서 구하도록 제안하였다. 즉, (0.2∼0.6)f$_ck$의 응력 범위에 해당하는 평균접선기울기를 탄성계수로 사용하도록 제안하였다.

• Advances in concrete construction
• /
• 제9권6호
• /
• pp.597-610
• /
• 2020

Stress-strain models of fibre reinforced polymer (FRP) confined concrete have been widely investigated; however, the existing load which is always supported by structures during the retrofitting phase, namely 'preload', has been neglected. Thus, preload effects should be clarified, providing insightful information for FRP retrofitting of structures with preload conditions. Towards this aim, experiments were performed for 27 cylinder concrete specimens with the diameter 150 mm and the height 300 mm. Three specimens were used to test the compressive strength of concrete to compute the preloads 20%, 30% and 40% of the average strength of these specimens. Other 24 specimens were divided into 2 groups; each group included 4 subgroups. Four subgroups were subjected to the above preloads and no preload, and were then wrapped by 2 FRP layers. Similar designation is applied to group 2, but wrapped by 3 FRP layers. All specimens were tested under axial compression to failure. Explosive failure is found to be the characteristic of specimens wrapped by FRP. Experimental results indicated that the preload decreases 12-13% the elastic and second stiffness of concrete specimens wrapped by 2 FRP layers. The stiffness reduction can be mitigated by the increase of FRP layers. Preload negligibly reduces the ultimate force and unclearly affects the ultimate displacement probably due to complicated cracks developed in concrete. A mechanism of preload effects is presented in the paper. Finally, to take into account preload effects, a modification of the widely used model of un-preload FRP confined concrete is proposed and the modified model demonstrated with a reasonable accuracy.

• Interaction and multiscale mechanics
• /
• 제4권4호
• /
• pp.313-320
• /
• 2011

This paper proposes an approximate formulation to estimate the bifurcation buckling loads of cylindrical shells with soft elastic cores under the conditions of axial compression. In general, thin-walled, axially compressed cylindrical shells buckle into a diamond pattern in the elastic range. However, buckling symmetrical with respect to the axis of the cylinder may occur when the cylindrical shell is supported by an elastic medium. By considering this characteristic, we introduce the simplified approximate formulation that can give sufficiently accurate results for the bifurcation buckling loads of cylindrical shells. Moreover the results are compared with the exact buckling loads in order to confirm the accuracy of the proposed approximate formulation.

• Structural Engineering and Mechanics
• /
• 제16권2호
• /
• pp.115-126
• /
• 2003

A novel finite element model based on the incremental endochronic theory with the effect of temperature was developed in this study to explore the deformed behaviors of a flexible pavement material. Three mesh systems and two loading steps were used in the calculation process for a specimen of three-dimensional circular cylinder. Computational results in the case of an uni-axial compression test for temperatures at $20^{\circ}C$ and at $40^{\circ}C$ were compared with available experimental measurements to verify the ability of developing numerical scheme. The isotropic response and the deviatoric response due to the thermal effect were presented from deformations in different profiles and displacement plots for the entire specimen. The characteristics of changing asphalt concrete material under a specified loading condition might be seen clearly from the numerical results, and might provide an useful information in the field of road engineering.

• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.135-144
• /
• 2007

최근에 노후화된 콘크리트 구조물의 보수 보강 방법으로 FRP를 이용한 보강이 효과적인 것으로 알려지고 있다. 본 연구의 목적은 FRP로 보강된 콘크리트 실린더의 거동을 실험적으로 조사하고자 하는 것이다. 실험 변수로는 콘크리트의 압축강도, FRP재료의 종류 및 구속비이다. 본 연구에서 아라미드, 탄소 및 유리섬유로 보강된 콘크리트의 성능을 압축강도 실험을 통한 연구 결과를 보이고 있다. 이를 위해 축방향 하중, 축방향 및 횡방향 변형률을 측정하였다. 본 연구를 통하여 콘크리트의 강도와 횡방향 변형률과 횡방향 구속응력의 비로 정의되는 구속비가 구속 콘크리트의 응력-변형률을 결정하는 주요 인자인 것으로 나타났다. FRP로 더 많은 보강을 한 실험체는 우수한 구속력으로 인한 강도의 증가를 야기하였다. 고강도 콘크리트의 경우 FRP에 의한 보강으로 구속력의 증가이 증가되더라도 실험체의 압축변형률이 감소하여 취성파괴의 경향을 보였다. 구속된 콘크리트의 파괴는 FRP 재료의 극한 변형률 보다 낮은 변형률에서 FRP의 파단으로 시작되어 콘크리트의 파괴에 도달하였다.

• 한국공간구조학회논문집
• /
• 제6권1호
• /
• pp.55-63
• /
• 2006

본 논문은 콘크리트 충전 원형 및 각형 합성 강관을 기둥부재로서의 적합성 및 적용성을 위한 연구로 두개의 강관을 합성한 콘크리트 충전 강관 기둥의 축압축 좌굴내력 및 변형형상에 대한 실험적 연구이다. 강관 기둥에 대한 연구는 콘크리트 충전 원형 강관 기둥, 콘크리트 충전 각형 강관 기둥, 콘크리트 충전 합성 강관 기둥으로 분류하여 실험을 수행하였다.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.53-73
• /
• 2023

Man-made structure materials like concrete usually contain inclusions. These inclusions affect the mechanical properties of concrete. In this investigation, the influence of inclusion length and inclination angle on three-dimensional failure mechanism of concrete under uniaxial compression were performed using experimental test and numerical simulation. Approach of acoustic emission were jointly used to analyze the damage and fracture process. Besides, by combining the stress-strain behavior, quantitative determination of the thresholds of crack stress were done. concrete specimens with dimensions of 120 mm × 150 mm × 100 mm were provided. One and two holes filled by gypsum are incorporated in concrete samples. To build the inclusion, firstly cylinder steel tube was pre-inserting into the concrete and removing them after the initial hardening of the specimen. Secondly, the gypsum was poured into the holes. Tensile strengths of concrete and gypsum were 2.45 MPa and 1.5 MPa, respectively. The angle bertween inclusions and axial loadind ary from 0 to 90 with increases of 30. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Diameter of the hole was 20 mm. Entirely 20 various models were examined under uniaxial test. Simultaneous with experimental tests, numerical simulation (Particle flow code in two dimension) were carried out on the numerical models containing the inclusions. The numerical model were calibrated firstly by experimental outputs and then failure behavior of models containing inclusions have been investigated. The angle bertween inclusions and axial loadind vary from 0 to 90 with increases of 15. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Entirely 32 various models were examined under uniaxial test. Loading rate was 0.05 mm/sec. The results indicated that when inclusion has occupied 100% of sample thickness, two tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusion has occupied 75% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusions have occupied 50% and 25% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. Also the inclusion was failed by one tensile crack. The compressive strength of samples decease with the decreases of the inclusions length, and inclusion angle had some effects on that. Failure of concrete is mostly due to the tensile crack. The behavior of crack, was affected by the inclusion length and inclusion number.