• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.115-129
• /
• 2001

The purpose of this study is to develop a cycle-free signal timing model for minimizing delays based on Third-generation control concept using Genetic Algorithm. A special feature of this model is its ability to manage delays of turning movements on the cycle basis. The model produces a cycle-free based signal timing(cycles and green times) for each intersection to minimize delays of turning movements on the cycle basis. The performance of cycle-free signal timings was evaluated on normal (v/c = 0.7) and oversaturated (v/c=1.0) conditions. The performance measures are throughput and the number of queued vehicles at the end of green time. The result shows that the cycle free signal timing is superior to the fixed signal timing to manage traffic flows of intersections; (1) the proposed model accomplishes the basic objective of the research, producing cycle free signal timings on the cycle basis, (2) on normal conditions, cycle free signal timings produce less queued vehicles at the end of green time, and (3) on oversaturated conditions, the cycle free signal timing is superior to the fixed signal timing to manage saturated traffic flows of intersections.

• Journal of Korean Society of Transportation
• /
• v.18 no.2
• /
• pp.73-89
• /
• 2000

This Paper documents the development of a cycle free based, coordinated dynamic signal timing model for minimizing queue lengths using Genetic A1gorithm. The model was embodied using MAT-LAB, the language of technical computing. A special feature of this model is its ability to manage queue lengths of turning movements at the start of green times. The model produces a cycle-free based signal timing(cycles and green times) for each intersection to minimize queue lengths of turning movements on the cycle basis. Concurrently, appropriate offsets could be accomplished by applying cycle-free based signal timings for respective intersections. The model was applied to an example network which consists of three intersections. The result shows that the model produces superior signal timings to the existing signal timing model in terms of managing queue lengths of turning movements.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.502-509
• /
• 2011

It is necessary to resolve integer ambiguity in GPS carrier based precise positioning. If there is no signal blockage or cycle slip, the integer ambiguity does not changed. however, signal blockage and cycle slip occur frequently under real operational environment. under this situation, integer ambiguity maintenance is indispensable for continuity of navigation information. In this paper, a cycle slip free technique is proposed for simplifying integer ambiguity maintenance procedure. this technique tested with simulated carrier phase signal with cycle slip aided intentionally. As a result, the proposed technique can give navigation information continuously even if cycle slip is occured.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.93-103
• /
• 2015

PURPOSES : The purpose of this study is to present a linear programing optimization model for the design of lane-based lane-uses and signal timings for an isolated intersection. METHODS: For the optimization model, a set of constraints for lane-uses and signal settings are identified to ensure feasibility and safety of traffic flow. Three types of objective functions are introduced for optimizing lane-uses and signal operation, including 1) flow ratio minimization of a dual-ring signal control system, 2) cycle length minimization, and 3) capacity maximization. RESULTS : The three types of model were evaluated in terms of minimizing delay time. From the experimental results, the flow ratio minimization model proved to be more effective in reducing delay time than cycle length minimization and capacity maximization models and provided reasonable cycle lengths located between those of other two models. CONCLUSIONS : It was concluded that the flow ratio minimization objective function is the proper one to implement for lane-uses and signal settings optimization to reduce delay time for signalized intersections.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.183-190
• /
• 2013

The Photoplethysmogram is a similar periodic signal that synchrinized to a heartbeat. In this paper, we propose a exponential weight moving average filter that use similarity of Photoplethysmogram. This filtering method has the average value of each samples through separating the cycle of PPG signal. If there are some motion artifacts in continuous PPG signal, disjoin the signal based on cycle. And then, we made these signals to have same cycle by coordinating the number of sample. After arrange these cycles in 2 dimension, we put the average value of each samples from starting till now. So, we can eliminate the motion artifacts without damaged PPG signal.

• Journal of Korean Society of Transportation
• /
• v.14 no.3
• /
• pp.127-141
• /
• 1996

This paper presents a unique approach to urban traffic network signal control. This paper begins with an introduction to traffic control in general, and then goes on to describe the approach of fuzzy control, where the signal timing parameters at a given intersection are adjusted as functions of the local traffic network condition and adjacent intersection. The signal timing parameters evolve dynamically using only local information to improve traffic signal flow. The signal timing at an intersection is defined by three parameters : cycle time, phase split, off set. Fuzzy decision rules are used to adjust three parameters based only on local information. The amount of change in the timing parameters during each cycle is limited to a small fraction of the current parameters to ensure smooth transition. In this paper the effectiveness of this method is showed through simulation of the traffic signal flow in a network of controlled intersection.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.81-98
• /
• 2002

This paper documents the development of a bi-objective(minimizing delays and Queue lengths) cycle-free signal timing length model using Genetic Algorithm. The model was embodied using MATLAB. the language of technical computing. A special feature of this model is its ability to concurrently manage delays and queue lengths of turning movement concurrently. The model produces a cycle-free signal timing(cycles and green times) for each intersection on the cycle basis. Appropriate offsets could be also accomplished by applying cycle-free based signal timings for respective intersections. The model was applied to an example network which consists of four intersections. The result shows that the model produces superior signal timings to the existing signal timing model in terms of managing delays and queue lengths of turning movements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.2
• /
• pp.188-193
• /
• 2010

With GPS being the primary navigation system, Loran use is in steep decline. However, according to the final report of vulnerability assessment of the transportation infrastructure relying on the global positioning system prepared by the John A. Volpe National Transportation Systems Center, there are current attempts to enhance and re-popularize Loran as a GPS backup system through the characteristic of the ground based low frequency navigation system. To advance the Loran system such as Loran-C modernization and eLoran development, research is definitely needed in the field of Loran-C receiver signal processing as well as Loran-C signal design and the technology of a receiver. We have developed a set of Matlab tools, which implement a software Loran-C receiver that performs the receiver's position determination through the following procedure. The procedure consists of receiving the Loran-C signal, cycle selection, calculation of the TDOA and range, and receiver's position determination through the Least Square Method. We experiences the effect of an incorrect cycle selection and various error factors (ECD, ASF, sky wave, CRI, etc.) from the result of the Loran-C signal processing. It is apparent that researches which focus on the elimination and mitigation of various error factors need to be investigated on a software Loran-C receiver. These aspects will be explored in further work through the method such as PLL and Kalman filtering.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.75-82
• /
• 2012

The Photoplethysmogram is a similar periodic signal that synchronized to a heartbeat. In this paper, we propose a periodic moving average filter that use similarity of Photoplethysmogram. This filtering method has the average value of each samples through separating the cycle of PPG signal. If there are some motion artifacts in continuous PPG signal, disjoin the signal based on cycle. And then, we made these signals to have same cycle by coordinating the number of sample. After arrange these cycles in 2 dimension, we put the average value of each samples from starting till now. So, we can eliminate the motion artifacts without damaged PPG signal.

• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.410-417
• /
• 2012

In this paper, a direct current control method based on a one-cycle controller (DCOCC) for double frequency buck converters (DF buck) is proposed. This control method can make the average current through the high frequency and low frequency inductors of a DF buck converter equal. This is similar to the average current control method. However, the design of the loop compensator is much easier when compared with the average current control. Since the average current though the high frequency and low frequency inductors is equivalent, the current stress of the high frequency switches and the switch losses are minimized. Therefore, the efficiency of the DF buck converter is improved. Firstly, the operation principle of DCOCC is described, then the small signal models of a one cycle controller and a DF buck converter are presented based on the state space average method. Eventually, a system block diagram of the DCOCC controlled DF buck is established and the compensator is designed. Finally, simulation and experiment results are given to verify the correction of the theory analysis.