• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.160-167
• /
• 2012

This paper is concerned with a particular fracture mechanics parameter ${\Delta}K_{th}$, known as the 'threshold stress intensity range', or 'fatigue threshold'. This threshold ${\Delta}K_{th}$ constitutes, as it were, a hinge between the notion of crack initiation and the notion of crack growth. It has often been thought that, like the endurance limit, it could be an intrinsic criterion of the material. The study was conducted on a SA-508 pressure vessel steel used in the nuclear power industry. This material exhibits a typical threshold effect in the range of the crack growth rates which were determined; that is, below approximately $da/dN=10^{-6}mm/cycle$, the slope of the da./dN versus ${\Delta}K$ curve is almost vertical. The value of ${\Delta}K_{th}$ was determined at a growth rate of $10^{-7}$ mm/cycle according to the ASTM Standard for threshold testing. The fatigue threshold values are in the range 21 $kg/mm^{3/2}$ to 12 $kg/mm^{3/2}$ depending on the stress ratio effect.

• East Asian Economic Review
• /
• v.22 no.3
• /
• pp.307-336
• /
• 2018

This paper proposes a monetary aggregate "Liquidity" that could serve as a useful indicator for gauging the appropriateness of monetary policy. If liquidity rises above a certain threshold, it is signaling that monetary policy is losing traction due to structural and other impediments even when the inflation gap remains open. This indicator supplements the financial cycle approach but adds value by providing a benchmark that is derived from the national account, and not based on its own trend. Over the last two decades, each time this measure rose above the threshold range, it was followed by a decline in GDP growth. The latter was greater when accompanied by a high physical asset value to GDP, e.g., an elevated property market.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.119-125
• /
• 2010

The moving block bootstrap, the stationary bootstrap, and the threshold bootstrap are methods of simulation output analysis, which are applicable to autocorrelated data. These bootstrap methods assume the stationarity of data. However, bootstrap methods cannot work if the stationary assumption is not guaranteed because of seasonality or trends in data. In the simulation output analysis, threshold bootstrap method is the best in describing the autocorrelation structure of original data set. The threshold bootstrap makes the cycle based on threshold value. If we apply the bootstrap to seasonality data, we can get similar accuracy of the results. In this paper, we verify the possibility of applying the bootstrap to seasonal data.

• Journal of Medicine and Life Science
• /
• v.20 no.3
• /
• pp.107-114
• /
• 2023

Epidemiological control of coronavirus disease 2019 (COVID-19) is needed to estimate the infection period of confirmed cases and identify potential cases. The present study, targeting confirmed cases for which the time of COVID-19 symptom onset was disclosed, aimed to investigate the relationship between intervals (day) from symptom onset to testing the cycle threshold (CT) values of real-time reverse transcription-polymerase chain reaction. Of the COVID-19 confirmed cases, those for which the date of suspected symptom onset in the epidemiological investigation was specifically disclosed were included in this study. Interval was defined as the number of days from symptom onset (as disclosed by the patient) to specimen collection for testing. A locally weighted regression smoothing (LOWESS) curve was applied, with intervals as explanatory variables and CT values (CTR for RdRp gene and CTE for E gene) as outcome variables. After finding its non-linear relationship, a polynomial regression model was applied to estimate the 95% confidence interval values of CTR and CTE by interval. The application of LOWESS in 331 patients identified a U-shaped curve relationship between the CTR and CTE values according to the number of interval days, and both CTR and CTE satisfied the quadratic model for interval days. Active application of these results to epidemiological investigations would minimize the chance of failing to identify individuals who are in contact with COVID-19 confirmed cases, thereby reducing the potential transmission of the virus to local communities.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.2
• /
• pp.141-152
• /
• 1996

Many eastern females concern themselves about the condition and the color of their skin. The purpose of the present study is to classify the skin trouble and the change of the facial color due to hormonal cycle in female. We examined the actual cricumstances by questionnaires, and made patch tests of methyl nicotinate, representing rubefacient, to estimate the epidermal penetratin rate, and measured the facial color change during the menstrual cycle period to invest the correlation factors between skin trouble due to cosmetics and facial color change. Fifty-two percent of subjects had skin trouble relating to cosmetics. One second of subjects with skin trouble due to cosmetic complained the change of sysptom by menstrual cycle. The changes of systptom were related on premenstrual period. The skin trouble developed mainly on the first trimester of the pregnancy. In patch test of methyl nicotinate, most cases showed decreased threshold of the reaction on minstruation, and other cases showed increased reactivity of the skin of menstruation. In facial color measurements, it proves in the appearance of red spot, darkness, increasing the value and turning the hue to yellowish, Also it demonstrates that premenstruation hue turn red and value level decrease. During the period, facial color turns pale and hue progress to yellow. This fact coincides with the questionnaire. We have quqntified through questionnaire, which demonstrates it has good correlation with done to the subjects among the internal environment factors hormonal cycle influences the facial color change and the skin trouble due to cosmetics. Through this paper the development of an more fragmented make-up and skin care products is required to increase the interest to females, to make true the creation of beauty.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.259-268
• /
• 2007

A knock detection circuit that is based on the signal of an accelerometer installed on the engine block of a spark ignition automotive engine has a band-pass filter with a certain frequency as a parameter to be calibrated. A new statistical method for the determination of the frequency which is the most suitable for the knock detection in real-time applications is proposed. The method uses both the cylinder pressure and block vibration signals and is divided into two steps. In both steps, a new recursive trigonometric interpolation method that calculates the frequency contents of the signals is applied. The new trigonometric interpolation method developed in this paper improves the performance of the Discrete Fourier Transformation, allowing a flexible choice of the size of the moving window. In the first step, the frequency contents of the cylinder pressure signal are calculated. The knock is detected in the cylinder of the engine cycle for which at least one value of the maximal amplitudes calculated via the trigonometric interpolation method exceeds a threshold value indicating a considerable amount of oscillations in the pressure signal; this cycle is selected as a knocking cycle. In the second step, the frequency analysis is performed on the block vibration signal for the cycles selected in the previous step. The knock detectability, which is an individual cylinder attribute at a certain frequency, is verified via a statistical hypothesis test for testing the equality of two mean values, i.e. mean values of the amplitudes for knocking and non-knocking cycles. Signal-to-noise ratio is associated in this paper with the value of t-statistic. The frequency with the largest signal-to-noise ratio (the value of t-statistic) is chosen for implementation in the engine knock detection circuit.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.274-276
• /
• 2002

This paper proposes a current differential relaying algorithm for power transformers using the third difference function of a differential current. The algorithm observes the instants when the wave-shape of the differential current is changed due to the change of the magnetization inductance. If the value of the third difference is bigger than the threshold, the output of a current differential relay is blocked for a cycle. In the cases of magnetic inrush and overexcitation, the blocking signal is maintained: however, for internal faults, reset in a cycle. The test results clearly show that the algorithm successfully distinguishes internal faults from magnetizing inrush.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.5
• /
• pp.107-115
• /
• 2015

Residential building owners are turning toward renovating their existing buildings to improve old and inefficient HVAC systems. Due to the renovation, much of the added costs will inevitably be passed on to tenants by increasing rent rates. This increment often increases the vacancy rate in the buildings. To balance the interests of both owners and tenants, this paper suggested a method to determine an appropriate rental rate increment for the HVAC system renovation. A case study on residential buildings was conducted to determine a balanced point where the rental rate increment that offsets the amount tenants are willing to pay for the renovation. To calculate all costs incurred by the renovation, life-cycle cost analysis was carried out. Therefore, this paper ultimately provides a threshold value of rental rate increment such that building owners can make a reasonable decision on the HVAC system renovation.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.4
• /
• pp.335-341
• /
• 2020

This study investigates the association of the AFB stain with the cycle threshold (Ct) value of the Cobas TaqMan MTB test (CTM test, Roche Diagnostics, Basel, Switzerland), and it establishes the base data for semi-quantitative identification of M. tuberculosis by the Ct value. CTM test were simultaneously conducted on 8,389 specimens submitted to the Samsung Medical Center from January 2015 to December 2015, and the results were analyzed and compared retrospectively investigates the association of the AFB stain with the Ct value of the CTM test, and it establishes the base data for semi-quantitative identification of M. tuberculosis by the Ct value. The Ct values for 135 positive specimens of the CTM were inversely correlated with the AFB stain (rs=-0.545, P<0.01). When the Ct value of the CTM test and the time to positivity (TTP) of the mycobacteria cultures were verified based on the AFB stain, they were found to have a positive correlation (rs=0.136, P<0.01). The negative correlation between the CTM test and the AFB stain grade was demonstrated. The clinical significance was verified by applying these criteria to the clinical results. The semi-quantitative criteria of this study can be used to facilitate the rapid isolation of patients with active tuberculosis and infection control in the hospital.

• Clinical and Experimental Reproductive Medicine
• /
• v.48 no.3
• /
• pp.255-261
• /
• 2021

Objective: This study aimed to investigate sperm motility and its changes after preparation as predictors of pregnancy in intrauterine insemination (IUI) cycles. Methods: In total, 297 IUI cycles from January 2012 to December 2017 at a single tertiary hospital were retrospectively analyzed. Patient and cycle characteristics, and sperm motility characteristics before and after processing were compared according to clinical pregnancy or live birth as outcomes. Results: The overall clinical pregnancy rate per cycle was 14.5% (43/297) and the live birth rate was 10.4% (30/289). Patient and cycle characteristics were similar between pregnant and non-pregnant groups. Sperm motility after preparation and the total motile sperm count before and after processing were comparable in terms of pregnancy outcomes. Pre-preparation sperm motility was significantly higher in groups with clinical pregnancy and live birth than in cycles not resulting in pregnancy (71.4%±10.9% vs. 67.2%±11.7%, p=0.020 and 71.6% ±12.6% vs. 67.3%±11.7%, p=0.030, respectively). The change in sperm motility after processing was significantly fewer in the non-pregnant cycles, both when the comparison was conducted by subtraction (post-pre) and division (post/pre). These relationships remained significant after adjusting for the female partner's age, anti-Müllerian hormone level, and number of pre-ovulatory follicles. According to a receiver operating characteristic curve analysis, an initial sperm motility of ≥72.5% was the optimal threshold value for predicting live birth after IUI. Conclusion: Initial sperm motility, rather than the motility of processed sperm or the degree of change after preparation, predicted live birth after IUI procedures.